Assembly & Setup
Star Trac Turbo Trainer - Installation Checklist
Use the checklist below to ensure proper installation of Star Trac Turbo Trainer:
All parts and hardware in the package are accounted for.
Ensure the Console is secured appropriately to the bike mast.
Verify pedals and pedal stands are secured properly to the unit with the left and right pedal secured on
the appropriate side.
Ensure the Seat fore/aft operates smoothly and the stop bolt is in place
Ensure all adjustment knobs (seat height, seat fore & aft, and handlebar) are properly secured.
Test the handlebar and seat post to make sure they move the complete range of motion freely and are
able to lock at different positions.
Ensure the user right and left grips are installed correctly on the correct user side
Adjust the leveling feet to ensure the unit is stable and leveled.
Complete a functional QC to ensure all mechanics operate smoothly. Also ensure the console is reading
accurate speed, distance, time, calories, and heart rate.
Overall visual & cosmetic inspection to ensure the unit is free from damage or missing graphics
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
StarTrac SPINNER PRO+ 7160 Series Owner's manual
-
Star Trac Spinner Blade Ion 7220 Owner's manual
-
-
StarTrac 7270 Owner's manual
-
Star Trac Spinner Velo Installation guide
-
-
StarTrac Spinner Elite 7080 Owner's manual
-
-
Star Trac 7000 User manual
-
Star Trac Spinner, Spinner Pro, Spinner User manual
Other documents
-
SportsArt Fitness C532U Owner's manual
-
SportsArt 10-6082 Owner's manual
-
Spirit Johnny G Owner's manual
-
Diamondback Fitness 510Ic Owner's manual
-
LifeSpan R5i Owner's manual
-
Diamondback Fitness 510ic Indoor Cycle Owner's Manual Owner's manual
-
Diamondback Bike Owners Manual & Assembly Instructions
-
Diamondback Fitness 910Ic Owner's manual
-
Vision Fitness R50 User manual
-
LifeGear 93046 Owner's manual
