Ohlins YA621 Mounting Instruction

Ohlins
Brand
Ohlins
Model
YA621
Type
Mounting Instruction

This manual is also suitable for

Ohlins YA621 is a high-performance shock absorber designed for snowmobiles. It features a 64 mm total length and a 3 mm rebound click adjustment. The YA621 is designed to improve the handling and performance of your snowmobile, providing a more comfortable and controlled ride.

With its adjustable rebound click, you can fine-tune the shock absorber to your riding style and the specific conditions you're riding in. The YA621 is easy to install, and comes with all the necessary hardware and instructions.

Ohlins YA621 is a high-performance shock absorber designed for snowmobiles. It features a 64 mm total length and a 3 mm rebound click adjustment. The YA621 is designed to improve the handling and performance of your snowmobile, providing a more comfortable and controlled ride.

With its adjustable rebound click, you can fine-tune the shock absorber to your riding style and the specific conditions you're riding in. The YA621 is easy to install, and comes with all the necessary hardware and instructions.

MOUNTING INSTRUCTION
Brand
YAMAHA
Model
SRX 600/700, Center
Year
1998
Art. No.
YA 731
Total length
305,5
mm
Stroke
64
mm
Reb.click
--
Comp.click
--
Preload
3
mm
Supplementary parts
192-01
710-01
Sticker / Dekal (2x)
Hook spanner / Haknyckel (2x)
Owners manual / Instruktionsbok
Mounting instructions
1. Lay the snowmobile on its side for better access to
the shock absorber, spread out suitable material on
floor to protect the finish on the hood and belly pan.
2. Release the tension on the limiter straps (i.e. the belt
limiting front suspension travel upon rebound).
Please note the position on the nut, by measuring the
distance from the end of thread to the nut.
3. Remove upper and lower shock absorber bolt.
Remove the stock shock absorber.
4. Mount the Öhlins-shock absorber with the body
upwards and the gas valve pointing forwards. Mount
the shock absorber bolts.
6. Tension the limiter straps to the same position.
Check by measuring the distance from the end of
thread to the nut.
7. Make sure that all bolts are tightened.
1. Lägg snöskotern på sidan, för att lättare komma åt
stötdämparen. Lägg något lämpligt material på
golvet för att skydda lackeringen.
3. Släpp på balata remmens spänning. Notera
positionen på muttern genom att mäta avståndet från
gängans ände till muttern.
4. Demontera stötdämparskruvarna och demontera
original stötdämparen.
5. Montera Öhlins stötdämparen med kolvstången
nedåt och gas nippeln uppåt-framåt. Montera
stötdämparskruvarna.
6. Sträck ballata remmen till samma läge som tidigare,
kontrollera genom att mäta avståndet från gängans
ände till muttern.
7. Se till att samtliga skruvar är åtdragna.
Öhlins Racin
g
AB frånsä
g
er si
g
allt ansvar för
skada på stötdämpare, motorc
y
kel eller person om
inte monterin
g
s- och skötsel instruktionerna har
föl
j
ts till fullo. In
g
en
g
aranti kan
g
es på funktion
eller livslängd om dessa instruktioner inte följts
Öhlins Racin
g
AB can not be responsible for an
y
dama
g
e to shock absorber, motorc
y
cle or person if
the mountin
g
- and maintainin
g
instructions are not
followed exactl
y
. Also no
g
uarantee can be
g
iven
for the performance and reliabilit
y
if these
instructions are not followed.
  • Page 1 1

Ohlins YA621 Mounting Instruction

Ohlins
Brand
Ohlins
Model
YA621
Type
Mounting Instruction
This manual is also suitable for

Ohlins YA621 is a high-performance shock absorber designed for snowmobiles. It features a 64 mm total length and a 3 mm rebound click adjustment. The YA621 is designed to improve the handling and performance of your snowmobile, providing a more comfortable and controlled ride.

With its adjustable rebound click, you can fine-tune the shock absorber to your riding style and the specific conditions you're riding in. The YA621 is easy to install, and comes with all the necessary hardware and instructions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers