Intellitronix MS9015B Operating instructions

Hello! I'm a chat assistant trained to help with this document. I have analyzed the installation guide for the Intellitronix Voltmeter Gauge M9015. This document covers wiring instructions and key features such as accurate voltage reading from 7.0V to 25.5V. I'm ready to answer any questions you may have about this device.
What is the acceptable voltage range for this voltmeter?

Can I solder the wires instead of using connectors?

How can I dim the LED display?

Made in America Lifetime Guarantee

Thank you for purchasing this instrument from Intellitronix. We value our customers!

INSTALLATION GUIDE

LED Voltmeter Gauge

Part Number: M9015

* Always disconnect the battery before attempting any electrical work on your vehicle.*

DESCRIPTION AND FEATURES

The Intellitronix LED voltmeter is compatible with any vehicle. The microprocessor

provides accurate readings from 7.0V to 25.5V.

WIRING INSTRUCTIONS

Note: Automotive circuit connectors are the preferred method of connecting wires. However,

you may solder if you prefer.

Ground - Black Connect directly to the engine block.

Power - Red Connect to a switched +12V source, such as the ignition.

Dimmer - Purple Connect to the parking lights to dim the LEDs 50% when the

headlights are on. However, do not connect to the headlight rheostat control wire;

the dimming feature will not work properly. If you don’t want your display to dim

with the headlights, connect the wire to an engine ground.