Schneider Electric TeSys LE Operating instructions

  • I have reviewed the End of Life Instructions for the TeSys LE enclosed DOL starter, specifically model LE1D09P7. This document provides crucial information for recyclers, including which parts require depollution and the overall recyclability of the product. I'm here to help answer any questions you have regarding its disposal and material composition.
  • What is the main purpose of the TeSys LE DOL starter?
    What is the recyclability potential of the product?
    What materials need to be depolluted?
ENVEOLI2107010_V1 - End of Life Instructions - TeSys LE - enclosed DOL starter
Product End of Life
Instructions
TeSys LE - enclosed DOL starter
Insert the picture of representative product (JPG 300 dpi)
refer to shopping kiosk
http://shoppingkiosk.schneider-electric.com/news.aspx
#Internal
ENVEOLI2107010_V1 08/2022
ENVEOLI2107010_V1 - End of Life Instructions - TeSys LE - enclosed DOL starter
Weight (in g)
20.81
0.51
34%
To be depolluted
2
PC, ABS-PC, PA, PA6, HDPE, SAN
with brominates flame retardants
plastic parts with brominated FR
To be depolluted
1,3,4
Other plastic parts with brominates
flame retardants
plastic parts with brominated FR
The main purpose of the product is to isolate a circuit, to protect and/or to control a motor.
LE1D09P7
Date of information release
920 g
08/2022
Based on “ECO’DEEE recyclability and recoverability calculation method” (version V1,
20 Sep. 2008 presented to the French Agency for Environment and Energy
Management: ADEME).
In case of special transportation:
transportation method
Legal information
This product family is in the scope of European Union directive 2012/19/EU on Waste Electrical
and Electronic Equipment (WEEE). The product family must be disposed according to the
legislation of the country. This document is intended for use by end of life recyclers or treatment
facilities. It provides the basic information to assure an appropriate end of life treatment for the
components and materials of the product.
No
Product function
Product reference
Total representative product mass
Representative product dimensions
Recyclability potential
88mm x 166mm x 128.5mm
Manufacturer identification
Schneider Electric Industries SAS
Recommendation
Comment
Number on
drawing
Component / Material
Brand name
Schneider Electric
3
2
#Internal
ENVEOLI2107010_V1 08/2022
ENVEOLI2107010_V1 - End of Life Instructions - TeSys LE - enclosed DOL starter
www.schneider-electric.com Published by Schneider Electric
ENVEOLI2107010_V1 © 2019 - Schneider Electric – All rights reserved
RCS Nanterre 954 503 439
Capital social 896 313 776 €
08/2022
Country Customer Care Center
http://www.schneider-electric.com/contact
35, rue Joseph Monier
CS 30323
F- 92506 Rueil Malmaison Cedex
Schneider Electric Industries SAS
#Internal
ENVEOLI2107010_V1 08/2022
/