Series SAH SMART Air Hood® Balancing Instrument - Low Flow Plugs
Specications - Installation and Operating Instructions
Bulletin TE-SAH-PLUG
The Series SAH SMART Air Hood® Balancing Instrument Low Flow Plugs are for
use in low ow applications with air ow from 40 to 125 CFM.
Diffuser/grill smaller than 24˝ x 24˝ and larger than 16˝ x 16˝
Position the diffuser/grill over the center of the SAH frame as precise as you can (error
can be caused by misalignment).
Printed in U.S.A. 4/22 FR# 444357-95©Copyright 2022 Dwyer Instruments, Inc.
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219-879-8000
Fax: 219-872-9057
www.dwyer-inst.com
The relative position of the diffuser/grill is solely dependent on the
dimensions of the diffuser/grill.
NOTICE
Diffuser/grill 16˝ x 16˝ or smaller
Position the diffuser/grill in the center of one edge of the SAH frame and plug the two
ports on the opposite side with the low ow plugs.
MAINTENANCE/REPAIR
Low Flow Plugs require no routine maintenance. The Low Flow Plugs are not eld
serviceable and it is not possible to repair them in the eld. Field repair should not be
attempted and may void warranty.
WARRANTY/RETURN
Refer to “Terms and Conditions of Sale” in our catalog and on our website. Contact
customer service to receive a Return Materials Authorization (RMA) number before
shipping the product back for repair. Be sure to include a brief description of the
problem plus any additional application notes.
SAH FRAM
PLUG
PLUG
SAH FRAM
PLUG
PLUG