Seguro 150
Temperature Data Logger
Quick Start Guide
For more detailed information on using the
app, go to:
sensified.io/150qs
Getting the App
The Seguro app is available free of charge in the Google
Play Store and the Apple App Store. Scan the barcode
with your phone to start:
This device complies with Part 15 of the FCC Rules (FCC
ID: 2A3LI-PM06). The full FCC compliance statement can
be found under “Regulatory” in the Seguro app.
Setting Up an Account
1. Tap the “Cloud Account”
button on the home screen,
which will display a browser
window with the Seguro
authentication site.
2. Tap the “Sign up” link (under
the Continue button).
3. On the signup page, you can
choose between using your
Google or Apple ID to log in,
or creating a sensified.io
account with a new email
and password. If you choose
to use a third-party identity
provider (Apple or Google),
only your basic profile
information (name, email,
language preference and
picture) are used.
Note: A cloud account is not needed to use the
Seguro 150 temperature data logger.
Connecting to the Device
For Android Devices:
Once the Seguro app is installed, simply touch the
Seguro device to the back of the phone (usually
near the top of the phone) and the app will open
automatically, then the device screen will open.
For Apple (iOS) Devices:
Open the Seguro app, and tap the Connect to
Device button on the home screen. A “Ready to
Scan” window will appear at the bottom of the
screen. Hold the Seguro device next to the back of
the phone until the phone beeps and/or vibrates.
The exact location of the NFC reader in the phone
may vary somewhat, but it is usually near the top
of the phone. Once the app recognizes the device,
the Device screen will open.
5 6 7 8
Starting a Recording
Once you have connected to a
Seguro device, you can start a
recording by tapping the Start
Recording button.
The Start Recording screen is
displayed, and you can adjust
the high and low thresholds,
start delay, and sampling
interval before starting the
recording. Cloud account users
can also add a photo of the item
being monitored, and Premium
users can add shipment tracking
information.
When all of the options have been selected, tap the
Start button to start the recording.
Ending a Recording
Stopping a recording that is
already in progress is
straightforward. After
connecting to the device, the
current recording will be
displayed on the device screen.
Tap the Stop Recording button,
and the Stop Recording screen
will appear. Users who have a
cloud account will have the
option to add a photo to the
recording, and premium cloud
account holders will have the
option to add tracking
information, if it isn’t already attached.
Tap the Stop button to stop the recording, and the
device screen will reappear, with a summary of the
recording. If you are not the person who started the
recording, that person will get a notification on their
mobile device that the recording is complete.
Reviewing Your Recordings
To review your past
recordings, tap the Recent
Recordings button on the
home screen. A list of
recordings will appear,
most recent first.
Completed recordings are
colored green, red, or blue
(for in-range, too high, or
too low, respectively) and
incomplete recordings are
gray.
Tapping on an individual recording displays the
recording detail screen, which includes a chart of the
trip as well as various statistics and datapoints. If the
start or stop location is provided, you can see a
detailed map of the location by tapping on the
address. Also, if your account allows, you can display
any photos included, as well as the detailed tracking
information.
Extras
Location
The mechanism for setting the location is also
slightly different between Android and Apple. For
Apple devices, the Seguro app will request
location permission the first time a recording is
started or stopped on a device. For Android
devices, the app requires location permission just
to connect to a Seguro device, but will also ask to
attach location information to the recording the
first time a recording is started or stopped.
Photos
You can add photos for both the start and end of
a recording. The Seguro app requires Camera
permission to add photos to a recording.
Shipping Information
For Premium account users, tracking information
for popular carriers can be added when a
recording is started or stopped. The app can scan
the barcode on a waybill, or the user can type in
the tracking number manually. The app requires
Camera permission to scan barcodes.
/