2. JOHNSON SYSTEMS INC
  3. PM-CD80SV
PM-CD80SV

JOHNSON SYSTEMS INC PM-CD80SV Operating instructions

  • Hello, I have analyzed the provided document, which appears to be a specification for the PM-CD80SV Enclosure by JOHNSON SYSTEMS INC. It includes detailed dimensional information and specifies a Cardinal Black Hammer Epoxy finish. I am ready to answer your questions regarding this device.
  • What is the finish of the enclosure?
    What are the tolerance for fractional dimensions?
    What is the scale of the drawing?
DIMENSIONS ARE IN INCHES UNLESS
OTHERWISE SPECIFIED
TOLERANCES:
FRACTIONAL
1/64"
ANGULAR: BEND
01%
THREE PLACE DECIMAL
.005"
THE INFORMATION CONTAINED IN
THIS DRAWING IS THE SOLE
PROPERTY OF
JOHNSON SYSTEMS INC
.
ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF
JOHNSON SYSTEMS INC
.
IS
PROHIBITED.
1923 Highfield Crescent SE.
Calgary, Alberta
Canada T2G 5M1
(403) 287-8003
(403) 287-9003 Fax
JOHNSON SYSTEMS INC.
Cardinal Black Hammer Epoxy E311-BK04 Semi-Gloss Hammer
83.61mm
3.2919in
413.52mm
16.2805in
129.05mm
5.0807in
123.84mm
4.8757in
394.23mm
15.5207in
Note:
Finish:
Wentzel (Vince)
Dippenaar
Drawn by:
8/05/21
Date:
03
Rev:
Sheet 1of 1
Page:
1:4
Scale:
-
Note:
PM-CD80SV
Project:
-
/