Telesystem Cisco Meraki Z3C Installation guide

Cisco Meraki Z3C
Telesystem
Brand
Telesystem
Model
Cisco Meraki Z3C
Type
Installation guide

Telesystem Cisco Meraki Z3C is a powerful networking device designed to provide reliable and secure internet connectivity for homes and small businesses. With its advanced features, the Z3C offers a seamless and efficient networking experience. Equipped with multiple Ethernet ports, it allows you to connect wired devices such as computers, printers, and VoIP phones directly to the network. The Z3C also comes with built-in Wi-Fi capabilities, enabling you to connect wireless devices like smartphones, tablets, and laptops to a secure and high-speed internet connection.

Telesystem Cisco Meraki Z3C is a powerful networking device designed to provide reliable and secure internet connectivity for homes and small businesses. With its advanced features, the Z3C offers a seamless and efficient networking experience. Equipped with multiple Ethernet ports, it allows you to connect wired devices such as computers, printers, and VoIP phones directly to the network. The Z3C also comes with built-in Wi-Fi capabilities, enabling you to connect wireless devices like smartphones, tablets, and laptops to a secure and high-speed internet connection.

PREP
Gather Equipment Needed
1
Included in Box
Not included (you provide):
Installation Guide
Cisco Meraki Z3C
Internet
connection
ETHERNET
ISP Modem with
WiFi disabled
UPS or surge
protector
Extra Ethernet
cables (CAT6)
| 1.888.808.6111 | www.telesystem.us
Prepare for Setup
2Plan your power source
Verify access to your firewall or WiFi router
PREP
During the setup process, you will need to plug the Meraki Z3C into a power
source. We recommend utilizing an Uninterruptible Power Supply (UPS), as this
will protect the device from power surges and brownouts. At a minimum the
Meraki should be connected to a surge protector to prevent any damage from
occurring to the device.
Before you start the setup process, verify that you have access to edit your
router configuration. You may be required to make changes depending on your
service plan and if you have a modem/router combo. If you are unsure how to
access your router or modem/router combo, consult the user guide provided
with the device or call your ISPs Customer Support for instructions.
| 1.888.808.6111 | www.telesystem.us
INSTALL
Once you have completed all necessary preparations, follow the next
steps to get your Meraki Z3C service up and running.
| 1.888.808.6111 | www.telesystem.us
Z3C Back Panel
NOTE: You may need to power cycle (power off and then back on) the device(s)
connected to the Meraki’s LAN ports, to get the device(s) to link up.
Connect the Meraki Z3C
3The Meraki Z3/Z3C requires connections to your Internet circuit and your network. Wait to plug
in the Meraki power connection until all network connections are plugged in.
• Using Ethernet cables, plug the ISP connection into the “Internet” port on
the Meraki Z3C. For Standard home Offices that means you would plug
your modem into “Internet 1” port on the Meraki Z3C.
• Connect any devices that will not use WiFi to ports 2 through 5 of the Meraki
Z3C. Note that Port 5 is a Power over Ethernet or PoE port, and should be
used for VoIP Phones, WiFi Access Points, or other devices that utilize PoE
to draw power from the Meraki Z3C.
• Connect the Meraki Z3C power adapter to the port on the back of the device.
Then plug the power adapter into a power source.
INSTALL
| 1.888.808.6111 | www.telesystem.us
INSTALL
Test Connection and Make Final Updates
4You should now be up and running on your Meraki service. Connect your devices to the Meraki
WiFi connection or to the available LAN ports on the back of the Meraki device. Note that devices
must be connected to either the Meraki WiFi network or physically through the Meraki device in
order to take advantage of the features of the Meraki service including firewalling and VPN
connections. You may need to disable your modem’s built in WiFi connection and ensure no other
devices are physically connected to the back of the modem.
To make sure connectivity is working
properly, run the following tests:
• Open up a web browser
• Test a streaming service
• Connect to your VPN (if applicable)
Congrats! Your setup is now complete.
| 1.888.808.6111 | www.telesystem.us
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Telesystem Cisco Meraki Z3C Installation guide

Cisco Meraki Z3C
Telesystem
Brand
Telesystem
Model
Cisco Meraki Z3C
Type
Installation guide

Telesystem Cisco Meraki Z3C is a powerful networking device designed to provide reliable and secure internet connectivity for homes and small businesses. With its advanced features, the Z3C offers a seamless and efficient networking experience. Equipped with multiple Ethernet ports, it allows you to connect wired devices such as computers, printers, and VoIP phones directly to the network. The Z3C also comes with built-in Wi-Fi capabilities, enabling you to connect wireless devices like smartphones, tablets, and laptops to a secure and high-speed internet connection.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents