HSNI 9597484 User guide

Brand: HSNI

Model: 9597484

Type: User guide

HSNI 9597484 is a versatile multimedia projector that offers a range of connectivity options to enhance your entertainment experience. Connect gaming systems, computers, laptops, smartphones, and casting devices via HDMI or VGA inputs to enjoy high-quality visuals and audio. The projector's wireless and wired connectivity options allow you to pair Bluetooth speakers or use the included speaker for immersive sound.

Quick Start Guide

How to install projection screen:

How to connect PJ300 to a video source:

Gaming system

HDMI* (best quality)

1- Using an HDMI cable (not included), connect the HDMI 1 or 2 input on the projector to the

HDMI output on your media player or computer.

2- Set the projector's Source to the connected HDMI input and use the controls on the

connected device to select and play media

Computer/laptop

HDMI* (best quality)

3- Using an HDMI cable (not included), connect the HDMI 1 or 2 input on the projector to the

HDMI output on your media player or computer.

4- Set the projector's Source to the connected HDMI input and use the controls on the

connected device to select and play media

VGA Cable*

1- Using a VGA cable, connect the VGA input on the projector to the VGA output on your

computer.

2- Set the projector's Source to PC and use the controls on the computer to select and play

media.

Smart Phones**

Casting Device*

- Most casting devices can connect to this projector via HDMI input and allow streaming content

controlled from your smartphone or by screen mirroring. Refer to the casting device user

manual for further instructions.

HDMI to Smartphone adapter*

- The process is the same as connecting an HDMI cable from the projector to a

computer/laptop or a gaming system.

*Note: this accessory is not included

**Note: Due to HDCP copyrights, certain streaming services may restrict viewing content with this

method of connectivity.

How to connect the speaker to PJ300:

Wireless connection

1- Enable Bluetooth on the included speaker (ISB150) or on another Bluetooth enabled speaker

2- Power on the projector (PJ300B) and make sure the projector's Bluetooth is ON from the Sound

menu in the projector’s settings.

3- The projector will begin searching for nearby Bluetooth devices to connect to and will

automatically initiate pairing. Note: disable Bluetooth on all receivers to which you do not wish

to connect.

4- When successfully paired, the Bluetooth receiver should indicate it is connected, usually with a

chime or tone and the projector will display the connected speaker or soundbar name on the

top right portion of the Main Menu screen

5- If either of the devices is reset, repeat the steps above to repair

Note: Bluetooth connectivity is only possible between the projector and external speakers. Smartphones

can’t connect to this projector via Bluetooth.

Wired connection

Using male-to-male AUX 3.5 mm cable (not included), connect one end to the projector and the other

end to the included speaker.

HSNI 9597484 User guide

HSNI 9597484 User guide

Other documents