DATA SHEET
Coee Maker
DATE: 18.06.2019
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
Model no:
EB60DSXB2, EB60DSXBB1
Product Dimensions
a Overall height of coffee maker
B Overall width of coffee maker
c Overall depth of coffee maker (excludes front metal trim)
d Height of chassis
e Width of chassis
f Depth of chassis
g Depth of coffee maker front frame and control panel (excludes
front metal trim)
h Height of control panel
i Height of metal cap on control panel
J Height of horizontal lower section from bottom datum
k Stepdown from control panel to chassis
l Extent coffee maker pulls out
M Height from bottom datum to lower edge of glass
Minimum Clearances
Minimum inside height of cavity (proud installation)
Minimum inside width of cavity
Minimum inside depth of cavity from front datum
Overall height of cabinetry (cavity around front frame)
Overall width of cabinetry (cavity around front frame)
Rear ventilation air vent depth*
Rear ventilation air vent width*
*A rear ventilation air vent totalling 280cm is required. The air vent must be
located at the rear of cabinet. It can be positioned at the base, sides, back or
top of the cavity.
IMPORTANT NOTE: For full installation and clearance details please refer to
our installation manual.
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CABINETRY CLEARANCES --------------------------------
A
B
C
D
E
F
G
H
I
J
K
L
PLAN VIEW
PROFILE VIEW
FRONT VIEW
DATUM : BOTTOM OF CHASSIS
DATUM : FRONT OF CHASSIS
DATUM : FRONT OF CHASSIS
AIR VENTILATION
458
596
481
m
460
NOT TO SCALE
EB60DSXB2, EB60DSXBB1
COFFEE MAKER
SPACERS, OPTIONAL.
SUPPLIED WITH
COFFEE MAKER