Crutchfield 70-1857 User manual

Brand
Crutchfield
Model
70-1857
Category
Motorcycle Accessories
Type
User manual
Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver).
The wire colors of your new receiver may, or may not, match the wire colors of the adaptor. Match adaptor and receiver wires by function,
disregarding color.
Connect Black wires to Ground wire of new receiver.
Individually tape off any unused wires.
Make final wiring connections following instructions on the next page.
Wiring Adaptor
120 70-1857
Revision 06/22/09
White - Left Front Channel RCA
Red - 12 Volts Switched Power
Green - Left Rear Channel RCA
Yellow - 12 Volts Constant Power
Gray - Right Front Channel RCA
Black (3) - Chassis Ground
Blue - Power Antenna
STEP 1 -- CONNECT WIRES
Plug connectors into matching inputs.
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call:
Crutchfield Technical Support at 1-800-955-9094
*120701857*
IMPORTANT
STEP 2 -- INSTALL
To Receiver
Violet - Right Rear Channel RCA
Copyright 2009 Crutchfield Corporation
R
at 1-888-955-6000
Amplifi er Remote
Tools Required
Soldering
Iron
Solder
(Rosin Core
Suggested)
Electrical
Tape
Wiring Adaptor Connections
C. Solder:
1. Heat wire.
2. Touch solder to wire, not to iron.
Page 2
Tools Required
Crimp Tool/
Wire Stripper
Crimp Caps
A. Strip wires back 1/2”.
B. Twist wires together and
insert in crimp cap.
C. Squeeze middle of cap
for tight connection.
A. Strip wires back 1/2”.
B. Twist wires together.
D. Tape
CRIMP METHOD SOLDER METHOD
120 70-1857
Copyright 2009 Crutchfield Corporation
R
  • Page 1 1
  • Page 2 2

Crutchfield 70-1857 User manual

Brand
Crutchfield
Model
70-1857
Category
Motorcycle Accessories
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents