CURT 14022 User manual

Category
Wall & ceiling mounts accessories
Type
User manual

CURT 14022 is a trailer hitch designed for vehicles with a maximum towing capacity of 12,000 lbs and a tongue weight of 1,200 lbs. It is easy to install and comes with all necessary hardware. The hitch is made of high-quality steel and is protected by a durable finish to resist rust and corrosion. With its weight-carrying and weight-distribution capabilities, the CURT 14022 is perfect for towing a variety of trailers, including travel trailers, boat trailers, and cargo trailers.

CURT 14022 is a trailer hitch designed for vehicles with a maximum towing capacity of 12,000 lbs and a tongue weight of 1,200 lbs. It is easy to install and comes with all necessary hardware. The hitch is made of high-quality steel and is protected by a durable finish to resist rust and corrosion. With its weight-carrying and weight-distribution capabilities, the CURT 14022 is perfect for towing a variety of trailers, including travel trailers, boat trailers, and cargo trailers.

CURTMFG.COM PRODUCT SUPPORT: 877.287.8634 14022-INS-RA 03/14/2022 ECN9467 PAGE 1
Product Registration and Warranty
CURT stands behind our products with industry-leading warranties. To get copies of the product
warranties, register your purchase or provide feedback, visit: warranty.curtgroup.com/surveys
Weight Carrying Capacity
Gross trailer weight (GTW) 12,000 lbs.
Tongue weight (TW) 1,200 lbs.
Weight Distribution Capacity
Weight distribution (WD) 12,000 lbs.
WD tongue weight (WDTW) 1,200 lbs.
INSTALLATION MANUAL 14022
Tools Required
Ratchet Socket, 22mm
Torque wrench Wrench, 22mm
* For a tools reference guide visit
curtmfg.com/trailer-hitch-installation
Level of Difficulty
Easy
Installation difficulty levels are based on time
and effort involved and may vary depending on
the installer level of expertise, condition of the
vehicle and proper tools and equipment.
WARNING
Never exceed the vehicle manufacturer's recommended towing capacity.
SAFETY INSTRUCTIONS
Safety glasses should be worn at all times while installing this product.
NOTICE
Visit www.curtmfg.com for a full-color copy of this
instruction manual, as well as helpful videos, guides and much more!
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
Periodic inspection of the trailer hitch should be performed to ensure all
mounting hardware remains tight and structural components are secure.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.
Parts List
Item Qty Description
1 1 Trailer hitch
Product Photo
CURTMFG.COM PRODUCT SUPPORT: 877.287.8634 14022-INS-RA 03/14/2022 ECN9467 PAGE 2
Existing M16 bolt:
New Orientation
Existing M16 bolt:
Factory Orientation
ASSEMBLY
FRONT
REAR
1
Parts List
Item Qty Description
1 1 Trailer hitch
Step 1
Remove the three bolts from the sides of each frame rail near the rear of the vehicle.
Partially reinstall them from the outside of the vehicle towards the center.
Step 2
Raise the hitch into position between the frame rails and slide the bolts through the hitch to secure it in place.
Step 3
Torque the M16 hardware to 146 ft-lbs.
TOWING BASICS & SAFETY INFORMATION
For information on safely towing your trailer, visit curtmfg.com/understanding-towing.
  • Page 1 1
  • Page 2 2

CURT 14022 User manual

Category
Wall & ceiling mounts accessories
Type
User manual

CURT 14022 is a trailer hitch designed for vehicles with a maximum towing capacity of 12,000 lbs and a tongue weight of 1,200 lbs. It is easy to install and comes with all necessary hardware. The hitch is made of high-quality steel and is protected by a durable finish to resist rust and corrosion. With its weight-carrying and weight-distribution capabilities, the CURT 14022 is perfect for towing a variety of trailers, including travel trailers, boat trailers, and cargo trailers.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI