Made in America Lifetime Guarantee
Thank you for purchasing this instrument from Intellitronix. We value our customers!
INSTALLATION GUIDE
Corvette Tachometer recall
Part Number: TB2101
Year Series: ‘78 - ‘79
* Disconnect the battery before attempting any electrical work on your vehicle. *
KIT COMPONENTS:
◊One (1) Printed Circuit Board
◊Three (3) Nylon washers
CIRCUIT BOARD INSTALLATION INSTRUCTIONS
1. Remove the tachometer from the housing
2. Flip the tachometer over and remove the three nuts securing the circuit board to the
gauge.
3. Remove the three remaining screws from the original circuit board.
4. Insert the three screws from step (3.) into the Intellitronix circuit board at the locations
marked +12V, GND, and Coil.
5. Put the three nylon washers on the screws protruding from the gauge.
6. Slide the circuit board onto the three screws pointing towards the gauge.
7. Replace the nuts back onto the three screws.
8. Put the tachometer back into your housing.
# # #
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Intellitronix DP7006W Installation guide
-
Intellitronix BS9113W Installation guide
-
Intellitronix MS9001B Installation guide
-
Intellitronix MS9015B Operating instructions
-
Intellitronix HL10001 Installation guide
-
Intellitronix BG10001 Universal 5.5 Gauge Bargraph Dash Panel Installation guide
-
Intellitronix M9222G Installation guide
-
Intellitronix M9011W Installation guide
-
Intellitronix BS9015B Installation guide
-
Intellitronix M9014 Installation guide
Other documents
-
Mercury Optimax 115 User manual
-
Cub Cadet Domestic Series 7000 User manual
-
Dakota Digital VHX-69C-CAC Mounting Manual
-
Lincoln Electric MIG 200 Square Wave User manual
-
Buell 2002 S3T User manual
-
Smithco Spray Star 3000 Owner's manual
-
Ford 1595 User manual
-
-
-
Universal M2-12A(C) User manual