Anderic Fan9T User manual

Brand: Anderic

Model: Fan9T

Type: User manual

Anderic Fan9T is a fan remote control system that allows you to conveniently operate your ceiling fan without the need for manual switches. It features adjustable fan speed, on/off control, and a reverse function for changing the direction of the fan blades. The Fan9T also includes a programmable timer so you can set it to turn on or off at specific times of the day.

Anderic Fan9T is a fan remote control system that allows you to conveniently operate your ceiling fan without the need for manual switches. It features adjustable fan speed, on/off control, and a reverse function for changing the direction of the fan blades. The Fan9T also includes a programmable timer so you can set it to turn on or off at specific times of the day.

Anderic®

FAN9T and FAN28R/UC7067FCRX

Installation Instructions.

Notes:

This remote system is not designed for fan forward/reverse operation, for fan reverse operation, stop the fan first, and then manually change the position

of reverse switch located on the fan body.

Receiver Installation instructions:

1. Turn the power off to the fan from the circuit

breaker box.

2. Remove the ceiling fan canopy from the mounting

bracket (Fig.2).

3. Disconnect existing wiring between ceiling fan and

supply wires from junction box (or old receiver, if

applicable), and remove old receiver if applicable.

4. Wiring the new receiver (Fig.2).

a. Connect Green wire from fan to bare

copper (ground) from junction box.

b. Connect Red wire (AC IN L) from

Receiver unit to the Black wire from

junction box.

c. Connect White wire (AC IN N) from

Receiver unit to White wire from

junction box.

d. Connect white wire (TO MOTOR N) from

Receiver unit to White wire from fan.

e. Connect Black or Red wire (TO MOTOR

L) from Receiver unit to Black or Red

wire from fan.

f. Connect Blue wire (FOR LIGHT) from

Receiver unit to Blue wire from fan. If

other fan or supply Wires are different

color, have a qualified electrician do the

installation.

5. Tuck all wires into the junction box.

6. Lay the brown antenna wire on top of the receiver

unit and insert into mounting bracket.

7. Reinstall the canopy housing to the ceiling covering

all wires.

8. Take note of the dip-switches pattern (FIG. 1) for pairing

with the remote in the next step.

Pairing with remote:

Note: This unit has a total of 16 different code combinations using the

four dip-switches located in the battery compartment of the remote and

on the receiver. See FIG 1.

1. On the remote: Remove battery cover and set the dip-

switches to any pattern.

2. On the receiver: Set the dip-switches to the same pattern

as the remote.

See diagram FIG.1.

Installing the batteries:

Note: Insert a set of four (4) AAA 1.5v batteries (not included) into the

battery compartment, taking not of direction of polarity.

For additional support please go to Anderic.com or call 1-855-263-

3742. Anderic is a registered trademark of Dan’s Electronics Etc., Inc.

Copyright 2022

1

Anderic Fan9T User manual

Brand: Anderic

Model: Fan9T

Type: User manual

Anderic Fan9T is a fan remote control system that allows you to conveniently operate your ceiling fan without the need for manual switches. It features adjustable fan speed, on/off control, and a reverse function for changing the direction of the fan blades. The Fan9T also includes a programmable timer so you can set it to turn on or off at specific times of the day.

Related papers

Other documents