2. Computers & electronics
  3. Telecom & navigation
  4. Power banks
  5. Comsol
  6. PB0401BK
PB0401BK

Comsol PB0401BK, PB0401BK/ PB0401RG 4000mAh Power Bank Charger User manual

  • Hello! I've reviewed the user manual for the PB0401BK, PB0401RG Power Bank. This document provides instructions on how to charge the power bank and other devices, along with key features like its 4000mAh capacity and overcharge protection. I am ready to answer your questions about this device.
  • How to charge the power bank?
    How to charge a phone or USB device?
    How to check remaining capacity?
    How long it takes to charge the device?
4000mAh Power Bank Charger
Model: PB0401BK / PB0401RG
User Manual v1.3
USB-A Output: 5V 1A
Power On/Off
Capacity LED Indicators
Micro USB Input: 5V 1A
4
4
Features
• 4000mAh provides 140% extra battery for an average smartphone*
• Get an extra 20 hours of talk time on an iPhone X or 17 hours on
a Samsung Galaxy S9
• Four LED indicators to show remaining capacity
• Rechargeable more than 500 times
• Includes 30cm micro USB cable for charging and re-charging
• Built-in over voltage, over current, over heating, over discharge
and short circuit protection
• Watt Hour Rating: 14.8Wh
• Input: DC 5V 1A
• Output: DC 5V 1A
• Charging Time: 2 to 4 hours depending on charger output
• Size: 110mm (L) x 69mm (W) x 11mm (H)
• Weight: 128g
• Certifications: RCM, RoHS, UN38.3
Power Bank Layout
Suitable for
• iPhone/iPod
• Most smartphones including Samsung, LG, Sony, HTC, Nokia,
Microsoft, Huawei, Motorola, Google, OnePlus, Oppo & more
• Smartwatches, fitness trackers, digital cameras, portable gaming
consoles, eReaders and drones
• Bluetooth devices such as speakers, headsets or earphones
To Charge a Mobile Phone or other USB Device
To Charge Phone or USB Device
To Charge Power Bank
• Using your phone or other USB device’s charging cable, connect
the USB-A connector to the output connector on the power
bank
• Connect the other end of the cable to your device
• Charging should commence automatically
• If your phone or device uses a standard micro USB connector
then you can also use the included cable to charge your device
• During charging the LED indicators will be on
• When your phone or device is fully charged, the power bank will
automatically turn itself off
• Using the included micro USB cable, connect the larger USB-A
connector to a USB wall charger
• Connect the smaller micro USB connector to the input port on
the power bank
• During charging the LED indicators will flash to show charging
status
• When charging is complete all four LED indicators will remain on
To Check Remaining Capacity
• Press On/Off button and LEDs will light to show remaining capacity
• The LEDs will turn off automatically after approximately 5 seconds
Important Safety Instructions
• To maximize battery life span, fully charge power bank
before first use for 6 to 8 hours
• Store power bank in a cool and dry place.
• Do not store power bank in hot or humid environment
• Operating temperature should be between -10c to 45c
• If power bank is not used for long periods of time, you should
charge and discharge once every three months
• When charging a device, the power bank may feel warm, this
is a normal operating condition and should not be cause for
concern
• In normal conditions, the battery performance will decline
over several years
• Do not dispose of power bank in heat or fire
• Do not clean power bank with harmful chemicals or detergents
• Misuse, dropping or excessive force may cause product
damage
iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and
other countries.
* Based on iPhone 8 with battery capacity of 1821mAh
Made in China
/