Living Spaces 294421 User manual

Components:

A: Recliner Base (x1) B: Recliner Back (x1) C. C14 Cable (x1)

Step 1: Remove the C(C14 cable) which is tied to the steel mechanism motor at the bottom of A.

Step 2: Assemble the backrest as seen below.Line up the brackets on the back rest with the seat rest and push down until pieces

click into place.Please make sure the brackets are firmly inserted and secure.

Step 3: Wire connection as below picture in circle shows.Wire for power lumbar,red to red.Wire for power headrest,black to black.

Power connection:Insert C(C14 Cable) to C14 power socket at the back corner of the recliner.And then plug power cord

into the available electrical outlet as below picture shows.

Assembly Instructions