Generac 5621 User manual

Category
Power generators
Type
User manual

This manual is also suitable for

DESCRIPTION
The auxiliary transfer switch contact kit allows a single large electrical
load to be locked out from generator operation. If a home is equipped
with electrical heat or multiple central air conditioning units, this
device allows the generator transfer switch to interrupt the control
wire, breaking the signal needed for the appliance to turn on.
INSTALLATION INFORMATION
• Onceinstalled,thecontrolwiremustberunfromtheapplianceto
the transfer switch to connect to the contact.
DESCRIPTION
The fascia base wrap snaps together around the bottom the new air
cooled generators. This offers a sleek, contoured appearance as well
as offering protection from rodents and insects by covering the lifting
holes located in the base.
Please note that this wrap only fits air-cooled generators
manufactured after 4/2008 that have the contoured body wrap
style and are only available in grey.
STANDBY GENERATOR ACCESSORIES
Miscellaneous Accessory Kits
Air-Cooled Generator Sets
Auxiliary Transfer Switch
Contact Kit Fascia Base Wrap Kit
Model 5621 Model 5666
Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • generac.com
©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177550SBY/Printed in U.S.A. 04.08, rev. 05.08
STANDBY GENERATOR ACCESSORIES
Miscellaneous Accessory Kits
Air-Cooled Generator Sets
Base Plug Kits Paint Kits
Model 5652
Model 5651
Model 5653
Model 5654
Model 5703
Model 5704
Generac Power Systems, Inc. • P.O. Box 297, Whitewater, WI 53190 • generac.com
©2008 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0177550SBY/Printed in U.S.A. 04.08, rev. 05.08
DESCRIPTION:
The base plug kit offers an easy way to fill the lifting holes present in
the base of the generators. In the air-cooled product this offers rodent
and insect protection which could potentially be an issue during
service intervals. In liquid cooled product, it completes the look of a
finished base for a sleek, streamlined appearance.
Please note that the base plug kit (5652) for the air-cooled
product only fits air-cooled units manufactured prior to 4/2008
that do not have the contoured body wrap style.
DESCRIPTION:
The enclosure is the generator's first line of defense against the
elements and is important to keep in good condition. If the generator
enclosure is scratched or damaged, it is important to touch up
the paint to protect from future corrosion. These paint kits include
the necessary paint to properly maintain or touch up a generator
enclosure.
Please check with your sales representative to verify proper
color coordination.
5653 Tan Kit Generators manufactured prior to 4/2008
without contoured body style.
5654 Grey Kit Generators manufactured prior to 4/2008
without contoured body style.
5703 Bisque Kit – Generators manufactured after 4/2008
with contoured body style.
5704 Medium Grey Kit Generators manufactured after
4/2008 with contoured body style.
  • Page 1 1
  • Page 2 2

Generac 5621 User manual

Category
Power generators
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI