A&D AD-8118C User manual

AD-8118C

Universal Printer

INSTRUCTION MANUAL

1WMPD4001446

No part of this publication may be reproduced, transmitted, transcribed, or translated

into any language in any form by any means without the written permission of A&D

Company Ltd.

The contents of this manual and the specifications of the instrument covered by this

manual are subject to change for improvement without notice.

1

CONTENTS

1. INTRODUCTION...................................................................................................................................... 5

1-1 Features.........................................................................................................................................................5

1-2 Compliance with FCC Rules........................................................................................................................10

1-3 Unpacking......................................................................................................................................................6

AC-8118C Universal Printer.............................................................................................................................6

Accessories......................................................................................................................................................6

AD-8118C-02 Expansion Input Option Board..................................................................................................7

AD-8118C-10 Paper Winder ............................................................................................................................7

2. SPECIFICATIONS.................................................................................................................................... 8

2-1 General Specifications...................................................................................................................................8

AD-8118C Universal Printer.............................................................................................................................8

AD-8118C-02 Expansion Input Option Board..................................................................................................8

AD-8118C-10 Paper Winder ............................................................................................................................8

2-2 Input Specifications........................................................................................................................................9

AD-8118C Universal Printer.............................................................................................................................9

AD-8118C-02 Expansion Input Option Board..................................................................................................9

2-3 Printer Specifications.....................................................................................................................................9

Printer...............................................................................................................................................................9

Ink ribbon .........................................................................................................................................................9

Printer paper ....................................................................................................................................................9

3. PRECAUTIONS ..................................................................................................................................... 10

3-1 Installation....................................................................................................................................................10

3-2 Connection of Power Supply/Ground..........................................................................................................10

3-3 Power-Up Procedure...................................................................................................................................10

4. INSTALLATION PROCEDURE...............................................................................................................11

4-1 Installing the Printer Paper..........................................................................................................................11

4-2 Replacing the Ink Ribbon ............................................................................................................................15

4-3 Installing the AD-8118C-02 Expansion Input Option Board

..............................................................................18

2

4-4 Installing the AD-8118C-10 Paper Winder.................................................................................................. 19

Panel-Mounted Installation............................................................................................................................ 19

Tabletop Installation....................................................................................................................................... 19

4-5 Installing the Paper to the Paper Winder.................................................................................................... 20

4-6 Removing the Paper from the Paper Winder.............................................................................................. 22

5. DESCRIPTION OF PANELS ..................................................................................................................23

5-1 AD-8118C Universal Printer........................................................................................................................ 23

Front Panel.................................................................................................................................................... 23

Rear Panel .................................................................................................................................................... 23

Key Operation ............................................................................................................................................... 24

5-2 AD-8118C-02 Expansion Input Option Board............................................................................................. 24

5-3 AD-8118C-10 Paper Winder....................................................................................................................... 25

Front Panel.................................................................................................................................................... 25

Rear Panel .................................................................................................................................................... 25

6. OPERATION MODES.............................................................................................................................26

6-1 Operation Modes........................................................................................................................................ 26

6-2 Mode Selection Procedure ......................................................................................................................... 27

SET_MODE................................................................................................................................................... 27

PROGRAM_MODE....................................................................................................................................... 27

7. PRINT MODES .......................................................................................................................................28

7-1 Random Print Mode.................................................................................................................................... 28

Standard characters...................................................................................................................................... 28

7-2 Dump Print Mode........................................................................................................................................ 29

7-3 Interval Print Mode...................................................................................................................................... 29

7-4 Batch Print Mode........................................................................................................................................ 30

Setting and Operation................................................................................................................................... 30

Printing Example........................................................................................................................................... 31

8. SET_MODE ............................................................................................................................................32

8-1 Setting the Functions.................................................................................................................................. 32

Function List.................................................................................................................................................. 33

3

8-2 Setting the Interval Timer.............................................................................................................................37

Interval timer Setting Procedure ....................................................................................................................37

Interval Printing..............................................................................................................................................37

8-3 Setting the Code Number............................................................................................................................38

When code number input is 2 digits (F13=1).................................................................................................38

When code number input is 6 digits (F13=2).................................................................................................38

When code number input is 6 digits and increment (F13=3).........................................................................39

6-digit code number printing format...............................................................................................................39

8-4 Setting the Date and Time...........................................................................................................................40

Date and Time Setting Procedure..................................................................................................................40

9. PROGRAM_MODE................................................................................................................................ 41

9-1 Setting the Printing Format..........................................................................................................................41

Printing Format Setting Procedure.................................................................................................................41

Printing Items to be Programmed..................................................................................................................42

Displaying the Setting Contents.....................................................................................................................43

Setting Example.............................................................................................................................................44

Enlarged Characters......................................................................................................................................47

9-2 Setting the Printing Format by PC Communications

(UFC_MODE)

.........................................................................48

Setting Procedure ..........................................................................................................................................48

Command list.................................................................................................................................................48

Printing Format in Text...................................................................................................................................49

Error Messages..............................................................................................................................................50

Communications Cable..................................................................................................................................50

9-3 Setting the Code Conversion Table...............................................................................................................51

Setting Procedure ..........................................................................................................................................51

Recalling the Conversion Table .....................................................................................................................51

10. SERIAL INPUT / CONTROL I/O.......................................................................................................... 52

10-1 Serial Input Connection.............................................................................................................................52

Standard Serial Input (CH1 only)...................................................................................................................52

AD-8118C-02 Expansion Serial Input (CH2, CH3, CH4)...............................................................................53

Mini DIN Connector Assembly Procedure......................................................................................................54

10-2 Control I/O Connection..............................................................................................................................56

Standard Control I/O ......................................................................................................................................56

AD-8118C-02 Control I/O...............................................................................................................................57

Control I/O Connection...................................................................................................................................58

4

Control I/O Operation.................................................................................................................................... 59

11. DATA BUFFER......................................................................................................................................60

12. PRINTING SAMPLES...........................................................................................................................61

12-1 Random Printing....................................................................................................................................... 61

12-2 Subtotal Printing........................................................................................................................................ 61

12-3 Grand Total Printing.................................................................................................................................. 62

12-4 Batch Printing (F3=1, F9=2) ..................................................................................................................... 62

13. ERROR PRINTING...............................................................................................................................63

14. KEY OPERATION.................................................................................................................................64

15. TEST MODE.........................................................................................................................................65

16. APPENDIX............................................................................................................................................66

16-1 External Dimensions/Panel Cutout Dimensions....................................................................................... 66

AD-8118C...................................................................................................................................................... 66

AD-8118C-10................................................................................................................................................. 66

16-2 Character Code Table............................................................................................................................... 67

5

1. INTRODUCTION

The AD-8118C Universal Printer is designed primarily for use with A&D weighing indicators, scales and

electronic balances.

Before using your printer, please read this manual to gain an understanding of its functions and correct use.

After reading, keep this manual at hand so that you can refer to it whenever necessary.

1-1 Features

The AD-8118C Universal Printer has the following features.

Dot impact mechanism allows long-term storage of printed data.

Calendar/clock function. Date and time may be printed.

Cumulative total function and statistical calculation function by code and input channel.

Lithium battery provides cumulative total memory and calendar/clock backup without AC power for

approximately 10 years (with power off).

Serial input is either RS-232C or current loop. Current loop input allows connection to remote devices

(about 100m).

Interval function performs printing at set times

Programmable printing format

Inputs can be expanded up to 4 channels by adding an option board AD-8118C-02 so that the data of

four scales can be printed with one printer.

The same external dimensions, connectors and functions with the AD-8118A/B. Thus, replacement

with an AD-8118C is possible by setting the internal setting contents the same as the AD-8118A/B.

The optional paper winder, AD-8118C-10, allows easier management of the printer paper.

1-2 Compliance with FCC Rules

Please note that this equipment generates, uses and can radiate radio frequency energy. This

equipment has been tested and has been found to comply with the limits of a Class A computing device

pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to provide reasonable

protection against interference when the equipment is operated in a commercial environment. If this unit

is operated in a residential area it may cause some interference and under these circumstances the

user would be required to take, at his own expense, whatever measures are necessary to eliminate the

interference.

(FCC = Federal Communications Commission in the U.S.A.)

6

AD-8118C

1-3 Unpacking

When unpacking, check that all of the following items are included.

AC-8118C Universal Printer 1 unit

Accessories

• AC power cord 1 (1KO115 2.4 m)

• Grounded AC plug adapter 1 (1ET9102)

• Printing paper 1 (1PP137)

• Ink ribbon 1 (ERC-09 EPSON)

• Shaft 1 (105A46423)

• I/O connector 1 (FCN361J024, FCN360C024-B FUJITU)

• 7-pin DIN connector 1 (TCP0576-715267 HOSIDEN)

• 5-pin DIN connector 1 (TCP0556-715267 HOSIDEN) Insert the DIN connector

into the “OP-10.OUT”

when the AD-8118C-10 is

not

used.

• Rubber feet 4

• Instruction Manual 1

A

C power cord Printing paper Ink ribbon FCN connector FCN connector case

Grounded AC plug adapter DIN connectors Rubber foot Shaft Instruction manual

7-pin

5-pin

7

AD-8118C-02 Expansion Input Option Board

• I/O connector 1 (FCN361J024, FCN360C024-B FUJITU)

• Mini DIN connector 3 (TCP6150 HOSIDEN)

AD-8118C-10 Paper Winder

• Control cable 1 (1KO3228 Approximately 30 cm)

• Connection fixture 2 (M3 pan head screw 2, Hand-tightening screw 2)

• Printer paper cover 1

• Paper guide 1

• Rubber feet 4

Note: The illustration is not to scale.

Mini DIN connector FCN connector FCN connector case

Control cable Connection fixtures Printer paper cover Paper guide Rubber foot

8

2. SPECIFICATIONS

2-1 General Specifications

AD-8118C Universal Printer

(1) Power supply 85 VAC to 264 VAC, 50/60Hz

Caution: Do not use with a three-phase power source.

(2) Power consumption Approx. 17 VA with AD-8118C-02 installed

Approx. 20 VA with AD-8118C-02 and AD-8118C-10 installed

(3) Operating temperature range 0°C to 40°C

(4) Operating humidity 80%RH or less (Non-condensing)

(5) External dimensions 192 (W) x 185 (D) x 96 (H) mm

(6) Panel cutout dimensions 186 (+1.0, -0) x 92 (+0.8, -0) mm

(7) Mass 2.4 kg with AD-8118C-02 installed

(8) LCD 16 columns, 2 lines (Character width 2.15 x height 4.35 mm)

AD-8118C-02 Expansion Input Option Board

(1) RS-232C/Current loop (2 to 4 channels (CH), to be switched by rewiring the connector)

(2) Control I/O (Open collector)

AD-8118C-10 Paper Winder

(1) Power supply Supplied from the printer via the 1KO3228 control cable provided.

(2) Power consumption Approx. 20 VA with AD-8118C-02 and AD-8118C-10 installed

(3) Operating temperature range 0°C to 40°C

(4) Operating humidity 80%RH or less (Non-condensing)

(5) External dimensions 192 (W) x 185 (D) x 120 (H) mm

(6) Panel cutout dimensions 183 (+1.0, -0) x 115 (+0.8, -0) mm

(7) Mass 2.2 kg

9

2-2 Input Specifications

AD-8118C Universal Printer

(1) Method RS-232C or current loop (Input selector switch on the real panel)

(2) Baud rate (F1 setting) RS-232C: 600 bps to 38.2 kbps, Current loop: 600 bps to 2400 bps

(3) Data bits 7/8 bits (Switchable by F2 only for CH1)

(4) Parity bit 1 bit (EVEN)/None (Automatic switch to EVEN when data bits are 7,

and to none when data bits are 8.)

(5) Stop bit 1 bit

(6) Codes used ASCII or JIS

AD-8118C-02 Expansion Input Option Board

(1) Method RS-232C or current loop (To be switched by rewiring the connector)

(2) Baud rate (F1 setting) RS-232C: 600 bps to 38.2 kbps, Current loop: 600 bps to 2400 bps

(3) Data bits 7 bits (fixed)

(4) Parity bit 1 bit EVEN (fixed)

(5) Stop bit 1 bit

(6) Codes used ASCII or JIS

2-3 Printer Specifications

Printer

(1) Printing system Dot matrix impact printer

(2) Printing width 24 columns/line for 5x7 dots character (Standard character)

12 columns/line for 10x7 dots character (Enlarged character)

(3) Character size 1.7 (W) x 2.6 (H) mm (Standard character)

3.4 (W) x 2.6 (H) mm (Enlarged character)

(4) Printing speed Approximately 1.7 lines/second (Internal processing time excluded)

(5) Reliability Approximately 1,000,000 lines

Ink ribbon

(1) Character color Black

(2) Life Approximately 200,000 characters (varies depending on the environment)

To purchase ink ribbons, order using the model number AX-ERC-09-S (5 pieces).

Printer paper

(1) Size 57.5 (W) x 60 (D) mm

(2) Length Approximately 30 m (A red ending mark appears approximately 1 m before

the end)

(3) Number of printing lines Approximately 8,000 lines

To purchase printer paper, order using the model number AX-PP137-S (10 rolls).

10

3. PRECAUTIONS

The printer is a precision electronic device. Handle it with much care.

3-1 Installation

The operating temperature range is 0°C to 40°C.

Do not install the printer in direct sunlight.

As the printer and the paper winder are not sealed, do not use them where dust is prevalent. If

conductive substances get inside the printer or the paper winder, they may cause the printer or the

paper winder to malfunction..

Do not subject to strong vibration.

Do not expose the printer to excessive noise or static electricity as that may cause the printer to

malfunction.

3-2 Connection of Power Supply/Ground

Ground the printer to the rear terminal of your scale or balance. Do not plug it in directly to any other

equipment. Do not use it commonly with power devices.

The power supply operates from 85 VAC to 264 VAC. Do not use with a three-phase power source.

Use a stable power supply free from instantaneous dropout or noise. Do not use a common source

for the power lines.

3-3 Power-Up Procedure

When the printer is connected to other devices, turn on the power of the other devices first, then turn on

the power of the printer.

If the power is turned on at the same time, start-up of the CPU of the connected devices may be

delayed and when the printer is set to the automatic print or dump print mode, the first data may not be

processed normally.

For manual printing, there will be no problem if the data is input several times after the power is turned

on.

A

C power cord Grounded AC plug adapte

r

Ground

11

Printer cover

Loosen the screws

4. INSTALLATION PROCEDURE

4-1 Installing the Printer Paper

1. Turn the power off.

2. Loosen the screws on the printer cover.

3. Pull out the printer cover and printer unit together.

4. Remove the printer cover by lifting it gently as shown below.

Printer unit

Printer cover

Printer unit

12

1

2

Printer unit

Ink ribbon

5. The ink ribbon ( ) at the front of the printer unit can be accessed by lifting the printer cover

and removing it from the printer unit.

6. Peel off the adhesive tape on the printer paper completely. Insert the shaft supplied as an accessory

into the printer paper and set the paper on top of the printer unit.

7. A top view of the printer unit is shown at the bottom left.

Pass the edge of the printer paper through the slot and pass it under the roller.

Ink ribbon

Printer paper feeder knob

Shaft

Pass the edge of

the printer paper

through this slot.

Printer paper feeder knob

Pass the edge of

the printer paper

under the white

roller.

13

Ink ribbon

Printer paper feeder knob

8. Pull out the paper downward and insert it into the printer slot.

9. After installing the paper, turn the printer paper feeder knob as shown in the figure. The paper should

come out the front.

10. Reinstall the printer cover onto the printer unit as shown below.

Printer paper

Insert the paper into the slot.

Printer cover

Printer unit

14

11. Insert the printer unit into the printer chassis and tighten the printer cover screws.

12. Feed a small amount of printer paper from the printer.

Note: • Do not apply excessive force to the printer unit. If normal, the printer unit can be pulled out

easily. If it is hard to pull out, re-insert it and try to pull it out again.

• The printer is made of electronic circuits and other precision components and could be

damaged if metallic powder, water or other foreign substances get inside it. Also be careful

of static electricity when the printer unit is pulled out.

If dust or other foreign substances get inside the printer, blow it out with clean air. If the

printer is used in a dusty environment, consider using a dust cover or air purge.

• A red ending mark appears approximately 1m before the end of the roll paper; replace the

paper when you see this mark. Printing without any paper in the printer may shorten the life

of the printer.

Printer paper

15

Printer cover

Loosen the screws

4-2 Replacing the Ink Ribbon

1. Turn the power off.

2. Loosen the screws on the printer cover.

3. Pull out the printer cover and printer unit together.

4. Remove the printer cover by lifting it gently as shown below.

Printer unit

Printer cover

Printer unit

16

1

2

Printer unit

Ink ribbon

5. The ink ribbon ( ) at the front of the printer unit can be accessed by lifting the printer cover

and removing it from the printer unit.

6. Push the PUSH mark at the front left of the ink ribbon while supporting the ink ribbon with your right

hand as shown in the figure. Remove the ink ribbon forward.

7. Install the new ink ribbon by pushing it gently in the arrow direction as shown in the figure.

Support with the right hand.

Push the

PUSH mark.

Ink ribbon

17

8. Reinstall the printer cover onto the printer unit as shown below.

9. Insert the printer unit into the printer chassis and tighten the printer cover screws.

Note: • Do not apply excessive force to the printer unit. If normal, the printer unit can be pulled out

easily. If it is hard to pull out, re-insert it again and try to pull it out again.

• The printer is made of electronic circuits and other precision components and could be

damaged if metallic powder, water or other foreign substances get inside it. Also be careful

of static electricity when the printer unit is pulled out.

If dust or other foreign substances get inside the printer, blow it out with clean air. If the

printer is used in a dusty environment, consider using a dust cover or air purge when the

printer is not in use.

Printer cover

Printer unit

18

4-3

Installing the AD-8118C-02 Expansion Input Option Board

1. Turn the power of the printer off and remove the power cord from the unit.

2. Loosen the screws on the printer cover to remove it.

3. Loosen the screws (three each on the right and left sides) on the rear panel and pull out the locking

fixtures (one each on the right and left sides).

4. Pull out the main board about 5 cm and disconnect the keyboard cable from the connector CN6.

5. Pull out the rear panel with the main board attached.

6. Remove the blank panel for the option.

7. Install the expansion input option board. Insert the connector CN1 located on the center bottom of the

option board into the connector on the main board. Secure the option board using the screws

removed from the blank panel and the screw that is provided with the printer.

8. Insert the main board into the casing halfway and reconnect the keyboard cable.

9. Reinstall the rear panel using care not to catch the keyboard cable. Insert the locking fixtures and secure the

rear panel with the screws removed in step 3. Reinstall the printer cover.

10. Reconnect the power cord and turn the printer on.

11. Set the internal setting of F19 (number of channels used).

12. Connect the printer to the device(s) used.

2

3

4

5

6

Blank panel

7

Locking fixture

Expansion input

option board

Main board

Printer cover

keyboard cable

Connecto

r

CN6

Connecto

r

CN1

The screw that is provided

with the printe

r

Page is loading ...

A&D AD-8118C User manual

A&D AD-8118C User manual

Related papers

Other documents