![](//vs1.manuzoid.com/store/data-gzf/c82496358804ddc83313d16b8ada48c9/2/000494303.htmlex.zip/bg13.jpg)
15xxx | Operating the Console Trayxxx
Icon Function Description
Return Return to the previous menu.
Right
arrow
Once you've selected an item from the menu, click the right
arrow to access its parameters.
Toggle Switch between selections.
Sliders When adjusting color settings, you can use the sliders.
NOTE: If you change the settings and then proceed to another menu or exit the
OSD menu, the monitor automatically saves the changes.
Brightness/Contrast
Click the up arrow to increase the brightness or contrast and click the down
arrow to decrease the brightness or contrast. The range is from 0-100 for both
the brightness and contrast.
Auto Adjust
Click the checkmark to automatically adjust the screen to optimize the display
settings. In most cases, the Auto Adjust produces the best image for your
configuration.
Input Source
Click the checkmark to scan for available input signals.
NOTE: VGA is the only input signal supported.
Color Settings
You can set the image mode and color format under the Color Settings menu.