Page is loading ...
MOUSE PAD TRAY
AASSSSEEMMBBLLYYIINNSSTTRRUUCCTTIIOONNSS
1/4 FLAT WASHER
1/4 FLAT
WASHER
MOUSE
PAD TRAY
KEYBOARD
TRAY
BRACKET
KEYBOARD
TRAY
COMPUTER TRAY
NOTE:
Computer tray and
keyboard tray shown
disassembled for clarity
1/4 LOCK
NUT
BUTTON HEAD SCREW
1/4 - 20 x 1/2 Lg.
(4 required)
600 South Clark St. • Mayville, WI 53050-0026 • Phone 920-387-4120
HUBBELL
®
Workplace Solutions
The MOUSE PAD TRAY is attached to the keyboard sup-
port brackets beneath the computer tray. If keyboard tray
brackets do not have holes for pad tray, drill two .281
diameter holes in each bracket. Refer to Figure 2, below,
for hole location.
ASSEMBLY
Refer to illustrations on this page to aid in assembly.
11- If holes are not provided in brackets, drill per diagram below.
22- Position mouse pad tray as shown (Fig 1) with hanger
brackets on pad tray to outside of keyboard support brackets.
33- Attach mouse pad tray using 1/4 x 1/2" bolts, flat washers
and lock nuts.
Bulletin #630076.a
Figure 1-COMPUTER, KEYBOARD AND MOUSE PAD TRAYS
ASSEMBLED VIEW
Figure 2-KEYBOARD BRACKET HOLE LOCATION
11.12" 0.50"
0.75"
/
