Fujitsu D1241 User manual

Brand: Fujitsu

Model: D1241

Category: Motherboards

Type: User manual

             



•

http://www.fujitsu-siemens.com

A26361-D1241-Z120-1-7619

 







4 User’s Manual

CONTENTS

1. INTRODUCTION.............................................................................7

1.1How This Manual Is Organized..................................................7

1.2Item Checklist.............................................................................7

2. FEATURES........................................................................................8

2.1The motherboard..........................................................................8

2.1.1Specifications..................................................................8

2.1.2Specifications–Optional Components.............................9

2.1.3Performance...................................................................10

2.1.4Intelligence....................................................................11

2.2Motherboard Components........................................................12

2.2.1 Component Locations..................................................13

3. HARDWARE SETUP......................................................................14

3.1Motherboard Layout.................................................................14

3.2Layout Contents........................................................................15

3.3Hardware Setup Procedure.......................................................16

3.4Motherboard Settings................................................................16

3.5System Memory (DIMM).........................................................17

3.5.1SDRAM Configurations................................................17

3.5.2DIMM Installation.........................................................18

3.6Central Processing Unit (CPU).................................................19

3.7.1Expansion Card Installation Procedure.........................20

3.7Expansion Cards.......................................................................20

3.7.2Assigning IRQs for Expansion Cards............................21

3.8Connectors................................................................................22

SCSI Connection Notes............................................................32

3.9Starting Up the First Time........................................................33

4. BIOS SETUP.....................................................................................35

4.1Managing and Updating Your BIOS.........................................35

4.1.1Upon First Use of the Computer System.......................35

4.1.2Updating BIOS Procedures...........................................36

4.2BIOS Setup Program................................................................39

4.2.1BIOS Menu Bar.............................................................40

4.2.2Legend Bar....................................................................40

4.3Main Menu................................................................................42

4.3.1Primary & Secondary Master/Slave..............................43

4.3.2Keyboard Features.........................................................46

User’s Manual 5

CONTENTS

4.4Advanced Menu........................................................................48

4.4.1Chip Configuration........................................................50

4.4.2I/O Device Configuration..............................................51

4.4.3PCI Configuration.........................................................53

4.4.4 Shadow Configuration.....................................................55

4.5Power Menu..............................................................................56

4.5.1Power Up Control..........................................................58

4.5.2Hardware Monitor.........................................................60

4.6Boot Menu................................................................................61

4.7Exit Menu.................................................................................63

5. APPENDIX.......................................................................................65

5.1Glossary...................................................................................65

6 User’s Manual

FCC & DOC COMPLIANCE

Federal Communications Commission Statement

This device complies with FCC Rules Part 15. Operation is subject to the following

two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received, including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installa-

tion. This equipment generates, uses and can radiate radio frequency energy and, if

not installed and used in accordance with manufacturer's instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

WARNING! Any changes or modifications to this product not expressly ap-

proved by the manufacturer could void any assurances of safety or performance

and could result in violation of Part 15 of the FCC Rules.

Reprinted from the Code of Federal Regulations #47, part 15.193, 1993. Washington DC: Office of the

Federal Register, National Archives and Records Administration, U.S. Government Printing Office.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the Canadian

Department of Communications.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

User’s Manual 7

1.1How This Manual Is Organized

This manual is divided into the following sections:

1.INTRODUCTION Manual information and checklist

2.FEATURES Production information and specifications

3.HARDWARE SETUP Intructions on setting up the motherboard.

4.BIOS SETUP Intructions on setting up the BIOS

5.SOFTWARE SETUP Intructions on setting up the included software

6.SOFTWARE REFERENCE Reference material for the included software

7.APPENDIX Optional items and general reference

1.2Item Checklist

Check that your package is complete. If you discover damaged or missing items,

contact your retailer.

(1) Motherboard

(1) I/O Shield

(1) Ribbon cable for master and slave IDE drives

(1) 68-pin LVD SCSI ribbon cable for Ultra160/Ultra2 devices with Terminator

(1) Ribbon cable for a 3.5” floppy disk drive

(1) Support drivers and utilities

(1) This Motherboard User’s Manual

Optional Items

(1) Socket 370 CPU Terminator (required when installing only one CPU)

1. INTRODUCTION

Manual / Checklist

User’s Manual

2. FEATURES

Specifications

2. FEATURES

2.1The motherboard

The motherboard is carefully designed for the demanding corpo-

rate user who wants advanced features processed by the fastest processors for multi-

server applications.

2.1.1Specifications

• Latest Intel Processor Support

Intel Pentium

III 133MHz FSB Coppermine core FC-PGA

Intel Pentium

III 100MHz FSB Coppermine core FC-PGA

• Multi-Processor OS: Supports multi-processor operating systems such as Win-

dows NT/2000, Unix, Linux, and Netware when dual processors of the same

type and speed are installed.

• ServerWorks LE 3.0 Chipset: Features the ServerWorks LE 3.0 North Bridge

and RCC Open South Bridge. Supports PC133 SDRAM with ECC, dual peer to

peer PCI buses, and 64-bit (66/33MHz) PCI bus speed.

• Onboard Graphics: Features ATI RAGE-XL PCI VGA controller, 4MB PC100

SDRAM, and LCD panel connector.

• Smart Networking! Features the Intel 82559 Fast-Ethernet LAN Controller (fully

integrated 10BASE-T/100BASE-TX). Supports Wired for Management, remote

wake-up, and OnNow initiative to reduce the Total Cost of Ownership (TCO).

• 4GB PC133 Memory Support: Equipped with four Dual Inline Memory Mod-

ule (DIMM) sockets to support PC133 “registered” SDRAMs (available in 64,

128, 256, 512, or 1024MB densities) up to 4GB.

• SCSI Support: LSI 64-bit (66MHz) / 32-bit (33MHz) Ultra160 / Ultra2 (depend-

ing on model) dual channel SCSI controller supports up to 30 SCSI devices. BIOS

configurable onboard SCSI terminations.

SCSI ChipsetSCSI Type PCI1-4PCI 5-6PCI7

LSI 896 33MHz Ultra2 33MHz33MHz33MHz

LSI 1010-66 66MHz Ultra160 33MHz66MHz(none)

• UltraDMA/33 Support: Comes with an onboard PCI Bus Master IDE control-

ler with two connectors that support four IDE devices on two channels. Sup-

ports UltraDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and

Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-R/RW, LS-120, and

Tape Backup drives.

User’s Manual 9

2. FEATURES

Optional Components

• PCI/ISA Expansion Slots:

(4) 32-bit (33MHz) PCI

(2/3)64-bit (66/33MHz) PCI (depending on model)

(1) ASMC slot for IPMI compliant management solution

• 4 USB Ports: Provides more options for additional peripherals.

• SMBus: Features the System Management Bus interface, which is used to physi-

cally transport commands and information between SMBus devices.

• Wake-Up Support: Supports Wake-On-LAN and Wake-On-Ring, and BIOS

Wake-Up.

• ISA Multi-I/O: Provides two high-speed UART compatible serial ports and

one parallel port with EPP and ECP capabilities. UART2 can also be directed

from COM2 to the Infrared Module for wireless connections.

• Around-the-Clock Intrusion Detection: Chassis intrusion circuitry can log

chassis open events into LDSM. The onboard battery supports detection even

when normal power is removed and through a new design, battery drain is even

lower than the RTC used for keeping time!

• Server Health Monitoring: Provides an easy way to examine and manage sys-

tem status information, such as CPU and systerm voltages, temperatures, and

fan status through the onboard hardware ASIC.

• Enhanced ACPI: Programmable BIOS (Flash EEPROM), offering enhanced

ACPI for Windows NT and Windows 2000 compatibility, and autodetection of

most devices for virtually automatic setup.

• Smart BIOS: 4Mbit firmware gives a new easy-to-use interface which pro-

vides more control and protection over the motherboard. Provides Vcore and

CPU/SDRAM frequency adjustments, boot block write protection, and HD/SCSI/

MO/ZIP/CD/Floppy boot selection. Year 2000 certified.

• CPU Throttling: CPU throttling protects CPU from overheating.

• Integrated IOAPIC: Supports full 32-APIC entries and removes the need for a

separate IOAPIC chip.

2.1.2Specifications–Optional Components

The following onboard components are optional at the time of purchase:

• Cape Lookout Chipset: The optional cape lookout chipset together with the

onboard Intel 82559 Fast-Ethernet controller supports Alert-On-Lan II (AOL-

II) monitoring and management solutions.

User’s Manual

2. FEATURES

Performance

2. FEATURES

2.1.3Performance

• UltraPerformance: Onboard Ultra160/Ultra2 (depending on model) dual chan-

nel SCSI controller with two connectors that support 30 Ultra160/Ultra2 SCSI

devices in two channels.

• Dual Speeds: CPU frequency can operate at either 133MHz or 100MHz de-

pending on the CPU installed.

• High-Speed Data Transfer Interface: SCSI transfers using Ultra160/Ultra2

(depending on model) dual channel SCSI controller can handle rates up to 160MB/

s or 80MB/s. Ultra160/Ultra2 is backward compatible with slower SCSI de-

vices so that older SCSI devices are not wasted. (Ultra160/Ultra2 SCSI cables

have twisted pairs compared to flat ribbon cables used in older SCSI standards.)

• Advanced 64-bit PCI: Maximizes IO bandwidth for the next generation of 64-

bit PCI cards, supports up to (2) full 64-bit 66/33MHz PCI busses, and supports

up to (5) 32-bit 33MHz PCI busses.

• Full Peer-to-Peer Support: Allows full peer-to-peer transactions between PCI

busses and increases options for intelligent IO and Server Management cards.

• SDRAM Optimized Performance: This motherboard supports PC133 “regis-

tered” Synchronous Dynamic Random Access Memory (SDRAM), which increases

the data transfer rate to 1064MB/s max

• ACPI Ready: ACPI (Advanced Configuration and Power Interface) is also imple-

mented on all smart series motherboards ???. ACPI provides more Energy

Saving Features for future operating systems (OS) supporting OS Direct Power

Management (OSPM) functionality. With these features implemented in the OS,

PCs can be ready around the clock, yet satisfy all the energy saving standards.

To fully utilize the benefits of ACPI, an ACPI-supported OS, such as Windows

98, must be used.

• New Compliancy: Both the BIOS and hardware levels of the motherboard meet

the stringent requirements for SDG2.0 certification. The new SDG2.0 require-

ments for systems and components are based on the following high-level goals:

support for Plug and Play compatibility and power management for configuring

and managing all system components, and 32-bit device drivers and installation

procedures for Windows NT/2000. Color-coded connectors and descriptive icons

make identification easy as required by PC99.

User’s Manual 11

2. FEATURES

Intelligence

2.1.4Intelligence

• Fan Status Monitoring and Alarm: To prevent system overheat and system

damage, the CPU, power supply, and system fans can be monitored for RPM

and failure. All the fans are set for its normal RPM range and alarm thresholds.

• Temperature Monitoring and Alert: To prevent system overheat and system dam-

age, this motherboard supports processor thermal sensing and auto-protection.

• Voltage Monitoring and Alert: System voltage levels are monitored to ensure

stable current to critical motherboard components. Voltage specifications are

more critical for future processors, so monitoring is necessary to ensure proper

system configuration and management.

• System Resources Alert: Today’s server operating systems, such as Windows

NT and Windows 2000, require much more memory and hard drive space to

present enormous user interfaces and run large applications. The onboard hard-

ware ASIC in conjunction Intel LDSM will warn the user before the sys-

tem resources are used up to prevent possible application crashes. Suggestions

will give the user information on managing their limited resources more effi-

ciently.

• Dual Function Power Button: Through BIOS, the power button can be defined

as the “Stand by” (a.k.a. Suspend or Sleep) button or as the Soft-Off (see ATX

Power / Soft-Off Switch Lead in 3.8 Connectors for more information) button.

Regardless of the setting, pushing the power button for more than 4 seconds will

enter the Soft-Off mode.

• Remote Ring On (requires modem): This allows a computer to be turned on

remotely through an internal or external modem. With this benefit on-hand, users

can access any information from their computers from anywhere in the world.

• Alert-on-LAN II (requires optional hardware component): Part of Wired for

Management to enable IT staff to remotely respond to and resolve system trouble

which will decrease down time and lower total cost of ownership. Remote man-

agement response via remote diagnostics and troubleshooting work even when

the operating system has frozen. Remote power down for power management.

Asset tracking and monitoring through features like presence ping and logoff

notification.

User’s Manual

2. FEATURES

MB Components

2.2Motherboard Components

See opposite page for locations.

Location

Processor Support (2) Socket 370 for Pentium III Processors...............................2

Chipsets ServerWorks ServerSet LE 3.0 North Bridge...........................4

ServerWorks Open South Bridge...........................................10

4Mbit Firmware Hub (FWH).................................................17

ISA Multi-I/O Chipset............................................................19

Main Memory Maximum 4GB support

(4) DIMM Sockets....................................................................5

PC133 “registered” SDRAM support

Expansion Slots (4) 32-bit (33MHz) PCI..........................................................20

(2) 64-bit / 32-bit PCI (depending on model).........................18

(1) 32-bit PCI (depending on model).....................................16

(1) ASMS slot..............................................................15

System I/O (1) Floppy Disk Drive Connector.............................................7

(2) IDE Connectors (UltraDMA33 Support)............................6

(1) Parallel Port Connector...........................................(Top) 24

(2) Serial COM1/COM2 Port Connectors.........(Bottom) 23, 25

(1) RJ-45 Fast-Ethernet Connector...............................(Top) 26

(2) USB Port Connectors.........................................(Bottom) 26

(1) PS/2 Mouse Connector...........................................(Top) 27

(1) PS/2 Keyboard Connector.................................(Bottom) 27

(1) VGA Monitor Connector................................................. 22

Network Features Intel 82559 Fast-Ethernet Controller......................................21

Wake-On-LAN Connector..................(see layout on next page)

Wake-On-Ring Connector..................(see layout on next page)

Hardware MonitoringSystem Voltage Monitoring (integrated in ASIC).......14

(4) Fan Power & Speed Monitoring Connectors(see layout on next page)

Power ATX Power Supply Connector.................................................1

Special Feature

LSI 64-bit (66/33MHz) / 32-bit (33MHz) Ultra160 / Ultra2

(depending on model) 2 ch. SCSI controller................11

Onboard SCSI Connectors...................................................8, 9

Form Factor ATX

User’s Manual 13

2. FEATURES

Component Location

2.2.1 Component Locations

815 12 1011

3. HARDWARE SETUP

3.1 Motherboard Layout

24,4 cm (9,6 in)

PS/2

T: Mouse

B: Keyboard

Bottom: Top:

USB1 RJ-45

USB2

COM1

COM2

PARALLEL PORT

CHA_FAN1

ATX_POWER

Socket 370

VGA

USBPORT

3 & 4

ServerWorks

(RCC)

NB6635

North Bridge

CPU_FAN2

CPU_FAN1

Digital Flat Panel

(DFP) Connector

Super

I/O

4Mbit

Flash

BIOS

Intel

Fast

Ethernet

Server Management Card

(SMC) Slot

PCI7 (32-bit, 33MHz)

(not available with 1010-66 SCSI)

PCI6 (64-bit, 66/33MHz)

PCI5 (64-bit, 66/33MHz)

PCI4 (32-bit, 66/33MHz)

PCI3 (32-bit, 66/33MHz)

PCI2 (32-bit, 66/33MHz)

PCI1(32-bit, 66/33MHz)

WOR

CLEAR CMOS

ASIC

with Hardware

Monitor

CR2032 3V

Lithium Cell

CMOS Power

LSI SCSI

Controller

896/1010-66

SCSI-B

68-Pin Ultra 160/Ultra2-Wide SCSI Connector

Ser ver Wor ks

(RCC)

IB6566

South Bridge

2MB

SDRAM

2MB

SDRAM

CONFIG

Switches

(reserved)

ATI

RAGE XL

VGA

Controller

68-Pin Ultra 160/Ultra2-Wide SCSI Connector

SCSI-A

PANEL

(Reserved)

IDELED

WOL_CON

DIMM Socket 0 (64/72-bit, 168-pin module)

DIMM Socket 1 (64/72-bit, 168-pin module)

DIMM Socket 2 (64/72-bit, 168-pin module)

DIMM Socket 3 (64/72-bit, 168-pin module)

Secondary

IDE

Primary

IDE

FLOPPY

CHA_FAN2

SMB

30,5 cm (12 in)

SCSI Chipset SCSI PCI1-4 PCI 5-6 PCI7

LSI 896 33 MHz Ultra2 33MHz 33MHz 33MHz

LSI 1010-66 66MHz Ultra160 33MHz 66MHz (none)

Note. Grayed components are optional at the time of purchase.

User’s Manual 15

3. HARDWARE SETUP

Layout Contents

3. H/W SETUP

3.2Layout Contents

Expansion Slots

1)DIMM 0/1/2/3 p.17168-Pin System Memory Support

2)CPU p.19Central Processing Unit (CPU)

3)PCI1/PCI2/PCI3/PCI4/PCI7p.2032-bit PCI Bus Expansion Slots (PCI7 depends on model)

4)PCI5/PCI6 p.2064-/32-bit PCI Bus Expansion Slots (depending on model)

Connectors

1)PS2KBMS p.22PS/2 Mouse Connector (6-pin female)

2)PS2KBMS p.22PS/2 Keyboard Connector (6-pin female)

3)USB p.23Universal Serial Bus Ports 0 & 1 (Two 4-pin female)

4)LAN p.23Fast-Ethernet Connector (RJ45)

5)PRINTER p.23Parallel Port Connector (25-pin female)

6)COM1/COM2 p.23Serial Port COM1/COM2 Connectosr (Two 9-pin male)

7)VGA p.24Monitor (VGA) Output Connector (15-pin female)

8) USBPORT p.24Universal Serial Bus Port (10-1 pins)

9)CHASSIS p.25Chassis Intrusion Connector (4-1 pins)

10)FLOPPY p.25Floppy Disk Drive Connector (34-1 pins)

11)IDE1/IDE2 p.26Primary/Secondary IDE Connectors (Two 40-1 pins)

12)WOL_CON p.27Wake-On-LAN Connector (3 pins)

13)WOR p.27Wake-On-Ring Connector (2 pins)

14)IDELED p.28IDE/SCSI Activity LED (2 pins)

15)CPU_FAN1/2,CHA_FAN1/2p.28CPU and Chassis Fan Connectors (Four 3-pin)

16) SMB p.29SMBus Connector (5-1 pins)

17)NIC (PANEL) p.29NIC Activity LED (2 pins)

18)STATUS (PANEL) p.29Status Activity LED (2 pins)

19)SMI (PANEL) p.29System Management Interrupt Switch Lead (2 pins)

20)PWRSW (PANEL) p.30ATX Power / Soft-Off Switch Lead (2 pins)

21)CHASSIS (PANEL) p.30Chassis Intrusion Connector (2 pins)

22)RESET (PANEL) p.30Reset Switch Lead (2 pins)

23)PWR.LED (PANEL) p.30System Power LED Lead (3-1 pins)

24)NMI (PANEL) p.30Non-Mask Interrupt Switch (2 pins)

25)SPEAKER (PANEL) p.30System Warning Speaker Connector (4 pins)

26)IDELED (PANEL) p.30IDE/SCSI Activity LED (2 pins)

27)ATXPWR p.31ATX Power Supply Connector (20 pins)

28)SCSI-A/SCSI-B p.3168-pin Ultra160/Ultra2 SCSI Connectors (Two 68 pins)

16 User’s Manual

3. HARDWARE SETUP

3.3Hardware Setup Procedure

Before using your computer, you must complete the following steps:

•Check Motherboard Settings

•Install Memory Modules

•Install the Central Processing Unit (CPU)

•Install Expansion Cards

•Connect Ribbon Cables, Panel Wires, and Power Supply

3.4Motherboard Settings

WARNING! Computer motherboards and expansion cards contain very delicate

Integrated Circuit (IC) chips. To protect them against damage from static electric-

ity, you should follow some precautions whenever you work on your computer.

1.Unplug your computer when working on the inside.

2.Use a grounded wrist strap before handling computer components. If you do

not have one, touch both of your hands to a safely grounded object or to a metal

object, such as the power supply case.

3.Hold components by the edges and try not to touch the IC chips, leads or con-

nectors, or other components.

4.Place components on a grounded antistatic pad or on the bag that came with the

component whenever the components are separated from the system.

5.Ensure that the ATX power supply is switched off before you plug in or

remove the ATX power connector on the motherboard.

Motherboard Settings

3. H/W SETUP

Page is loading ...

Fujitsu D1241 User manual

Brand: Fujitsu

Model: D1241

Category: Motherboards

Type: User manual

Download PDF

report

Fujitsu D1241 User manual

Fujitsu D1241 User manual

Related papers

Other documents