2. CYP
  3. CPCD-3A

CYP CPCD-3A Operating instructions

  • Hello, I'm your chat assistant. I've reviewed the Operation Manual for the Cypress CPCD-3A PC/Component distributor. This document details how to connect and use the device, which supports splitting both video and audio signals for multiple displays. I'm ready to answer your questions about features, connections and specifications of the device.
  • What input signals are supported?
    How many outputs does it have?
    What cable can be used for audio input?
    What is the maximum supported video resolution?
    What is the video bandwidth?
PC/Component
Distributor
with Audio
CPCD-3A
Operation Manual
Introduction
Cypress CPCD-3A is a high performance PC/Component distributor
with stereo audio. It is designed to connect one PC or HDTV signal source
with audio to 3 PC or HDTV displays.
Features
* Supports either PC (RGB) or HDTV (YPbPr) input signal.
* Accepts one PC or HD component input and split it into 3 buffered and
identical outputs.
* Supports stereo audio input and split it to 3 identical
outputs via 3.5mm mini-stereo connector.
* High video signal bandwidth (480MHz/-3dB) supports PC/HDTV
resolution up to UXGA/1080p.
* Ideal for presentation and home theater application.
* Plug and play, easy to install.
Operation Controls and Functions
OUTPUT
AUDIO OUTPUT INPUT
DC 5V 1A
AUDIO
1 23
PC
CPCD-3A PC distributor up to 1080P/UXGA
PC 3/ YPbPr 3PC 2/ YPbPr 2PC 1/ YPbPr 1
5
4 3 2 1
1. Power Input: Plug the supplied 5VDC power supply into the unit
and the LED will illuminate when it is connected.
2. Video input: Connect to the video output of your source devices such as
PC or DVD player by using the HD-15 to HD-15 cable or
HD-15 to 3 RCA cable.
3. Audio input: Connect to the audio output of your source devices such as
PC or DVD player by using the 3.5mm phone jack audio cable
or 3.5mm phone jack to 2 RCA audio cable.
4. Audio outputs: Connect the audio cables from these ports to the audio input
of the speaker systems.
5. Video outputs: Connect each of the PC/HD output to the input
of the PC or HD display.
* PC Input * 1RGB 0.7Vp-p 75 ohm HV 5Vp-p 10K ohm
* PC Output * 3RGB 0.7Vp-p HV 5Vp-p 10K ohm; or Y : 1Vp-p, PbPr: 0.7Vp-p 75 ohm
* Audio Input * 12Vrms max 47K ohm
* Audio Output * 32Vrms max 47K ohm
* Video Bandwidth480MHz (-3db)
* Compatibility: VGA upto UXGA/1080p in RGBHV, RGBs, RGsB, YPbPr formats.
* Differential gain0.05%
* Differential phase0.05 degree
* Power5V 2A
* Accessories: 5V power supply, HD-15 to HD-15 video cable,
Stereo audio cable.
* Dimension (WxHxD)141 x 38 x 105mm
Specification
Connection and Installation
PC Connection
OUTPUT
AUDIO OUTPUT INPUT
DC 5V 1A
AUDIO
1 23
PC
CPCD-3A PC distributor up to 1080P/UXGA
PC 3/ YPbPr 3PC 2/ YPbPr 2PC 1/ YPbPr 1
PC Monitor
HDTV Connection
OUTPUT
AUDIO OUTPUT INPUT
DC 5V 1A
AUDIO
1 23
PC
CPCD-3A PC distributor up to 1080P/UXGA
PC 3/ YPbPr 3PC 2/ YPbPr 2PC 1/ YPbPr 1
LCD TV, Projector, or Plasma
DVD
Speaker
Speaker 3 Speaker 2 Speaker 1
Audio/Video in
D-sub to 3 RCA
adaptor cable
/