Johannus Ecclesia T355 User manual

T-255 / T-355 / D-455

User Manual Ecclesia T-255 / T-355 / D-455

2

Manufacturer Global Organ Group b.v.

Address Keplerlaan 2

6716 BS EDE

Country The Netherlands

Telephone +31 (0)318 63 74 03

E-mail [email protected]m

Website www.johannus.com

Version 1.1

Date June 2023

data file or made public in any form or in any way either electronically,

mechanically by way of photocopying, recording or in any other way without the

prior written permission of Global Organ Group b.v.

User Manual Ecclesia T-255 / T-355 / D-455

3

CONTENTS

1 SAFETY........................................................................................... 5

1.1 Safety instructions ...................................................................................... 5

1.2 Symbols on the Instrument ........................................................................ 6

1.3 Symbols in this manual ............................................................................... 6

1.4 Transport and storage ................................................................................ 7

1.5 Cautions and important notes .................................................................... 8

1.6 Placement ................................................................................................. 10

1.7 Repairs and data ....................................................................................... 10

1.8 Additional precautions ............................................................................. 11

2 INSTALLATION ..............................................................................12

2.1 Installation and connection ...................................................................... 12

2.1.1 Ecclesia T-255 ............................................................................................. 12

2.1.2 Ecclesia T-355 ............................................................................................. 13

2.1.3 Ecclesia D-455............................................................................................. 14

2.2 Opening and closing roll cover ................................................................. 15

2.3 Adjustable music desk (Ecclesia D-455) .................................................... 15

2.4 Pedal contact calibration .......................................................................... 15

2.5 Switch on .................................................................................................. 16

3 DESCRIPTION OF THE INSTRUMENT ...............................................17

3.1 Overview of controls................................................................................. 17

3.1.1 Ecclesia T-255 ............................................................................................. 17

3.1.2 Ecclesia T-355 ............................................................................................. 18

3.1.3 Ecclesia D-455............................................................................................. 19

3.2 Connect and switch on the external device(s) ......................................... 20

3.3 External connections ................................................................................ 20

3.4 External loudspeaker output .................................................................... 21

3.5 USB (type A) connection for USB-memory ............................................... 21

4 OPERATION ..................................................................................21

4.1 General volume ........................................................................................ 21

4.2 Expression pedals ..................................................................................... 21

4.3 Reverb ....................................................................................................... 21

4.4 Organ Style ............................................................................................... 22

4.5 Stops ......................................................................................................... 22

4.6 Couplers .................................................................................................... 23

4.7 Accessories ............................................................................................... 23

4.8 Capture memory ....................................................................................... 25

4.8.1 Pre-programmed memory locations (PP – T, PL) ....................................... 25

4.8.2 Capture memory locations ......................................................................... 25

4.8.1 Preloads ...................................................................................................... 26

4.8.2 Programming a capture memory location ................................................. 26

4.8.3 Calling up a capture memory location ....................................................... 26

4.8.4 Memory lock .............................................................................................. 26

4.9 Transposer ................................................................................................ 26

4.10 Crescendo pedal ....................................................................................... 27

4.11 Zimbelstern (optional) .............................................................................. 27

User Manual Ecclesia T-255 / T-355 / D-455

4

4.12 Quick Access ............................................................................................. 27

4.12.1 Programming mode crescendo pedal ........................................................ 27

4.12.2 Programming mode MIDI ........................................................................... 27

4.12.3 Programming mode Orchestral settings .................................................... 28

4.12.4 Programming mode Orchestral settings startup default ........................... 28

4.12.5 Programming startup mode ....................................................................... 29

5 JOHANNUS MENU .........................................................................30

5.1 Audio Settings ...................................................................................... 30

5.2 Backup & Restore ..................................................................................... 31

5.3 Chorus ....................................................................................................... 32

5.4 Crescendo ........................................................................................... 32

5.5 Expression Pedals ..................................................................................... 33

5.6 General Volume ........................................................................................ 33

5.7 Key Volumes ............................................................................................. 33

5.8 Master Pincode ......................................................................................... 35

5.9 Memory Pincode ...................................................................................... 36

5.10 MIDI Config ............................................................................................... 36

5.11 Orchestrals (optional) ............................................................................... 37

5.12 Reset Procedures ...................................................................................... 38

5.13 Reverb Settings ......................................................................................... 39

5.14 Rotor Speed (optional) ............................................................................. 39

5.15 Startup Settings ........................................................................................ 41

5.16 Temperaments .................................................................................... 41

5.17 Tuning.................................................................................................... 43

5.18 USB ................................................................................................... 43

5.19 Version ...................................................................................................... 45

6 OPTIONAL ORCHESTRAL PACKAGES...............................................46

7 MAINTENANCE, TROUBLESHOOTING AND WARRANTY ..................48

7.1 Maintenance ............................................................................................. 48

7.1.1 Maintenance of the cabinet ....................................................................... 48

7.1.2 Maintenance of the manuals ..................................................................... 48

7.2 Problems ................................................................................................... 49

7.3 Warranty ................................................................................................... 49

8 MIDI IMPLEMENTATIONS ..............................................................50

8.1 MIDI Implementation Chart...................................................................... 50

8.2 MIDI Specifications ................................................................................... 51

8.3 Specifications of Instrument ..................................................................... 53

User Manual Ecclesia T-255 / T-355 / D-455

5

1 SAFETY

1.1 Safety instructions

To reduce the risk of fire or electric shock,

do not expose the organ to liquids, rain or moisture.

Position the Instrument on a stable, horizontal surface.



When power cord plug has an earth-pin: Connect the Instrument to an earthed

mains (wall) socket-outlet.

Turn off the Instrument when it is not in use.

Do not place the Instrument in a damp area.

Follow the instructions and precautionary measures in this user manual.

Keep this user manual with the Instrument.

The Instrument may only be opened by a technician authorized by Global

Organ Group B.V. The Instrument contains static-sensitive components. The

warranty is void if the Instrument is opened by a non-authorized person.

NOTICE

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any of the ventilation openings.

Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat.

9. When power cord plug has an earth-pin: Do not defeat the safety purpose of the

polarized or grounding-type plug.

A polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third prong

are provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods

of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

been dropped.

User Manual Ecclesia T-255 / T-355 / D-455

6

1.2 Symbols on the Instrument

Warning: The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying the

product.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

Warning for static-sensitive components. To prevent damage to electronic

parts from static electricity, be sure to discharge any static electricity from

your own body before handling / touching the instrument.

1.3 Symbols in this manual

Caution, Warning or important information

Do not, or forbidden to do

Note

User Manual Ecclesia T-255 / T-355 / D-455

7

1.4 Transport and storage

Pay attention to the following during transport and storage:

 Remove the music desk and the pedal board from the instrument, before

transport.

 Store in an area with 40% to 60% relative humidity.

Do not store in area’s e.g. baths, washrooms, on wet floors, expose to

steam or smoke, salt, humid, rain, moisture, dusty or sandy locations.

 Minimum temperature within the storage area: 0°C

 Do not expose the Instrument to direct sunlight (UV), do not place it

near devices that radiate heat, or otherwise subject to temperature

extremes. Also, do not allow lighting devices that normally are used while

their light source is very close to the Instrument (such as a piano light), or

powerful spotlights to shine upon the same area of the Instrument for

extended periods of time. Excessive heat can deform or discolour the

Instrument.

 Do not allow rubber, vinyl or similar materials to remain on this

Instrument for long periods of time. Such objects can discolour or

otherwise harmfully affect the finish.

 Do not paste stickers, decals, or the like to this instrument. Peeling such

matter off the instrument may damage and or discolour the exterior

finish.

 Do not bend the power cord or place heavy objects on it.

 Don’t allow foreign objects or liquids to enter Instrument;

Never place containers with liquid on Instrument; Do not put anything

that contains water on this Instrument. Also, avoid the use of insecticides,

perfumes, alcohol, nail polish, spray cans, etc., near the Instrument.

Swiftly wipe away any liquid that spills on the Instrument using a dry, soft

cloth. Never use benzene, thinners, alcohol or solvents of any kind, to

avoid the possibility of discoloration and/or deformation.

 Unplug the power cord from the outlet before cleaning. Before cleaning

the Instrument, turn it off and unplug the power cord from the outlet.

To clean the Instrument, use a dry, soft cloth; or one that is slightly

dampened. Try to wipe the entire surface using an equal amount of

strength, moving the cloth along with the grain of the wood. Rubbing too

hard in the same area can damage the finish.

 Do not open. Do not disassemble or modify by yourself

 Avoid climbing on top of the Instrument, or placing heavy objects on it,

nor on top of the keyboard nor pedal board. This can lead to dangerous

situations - such as tilting / tipping over - shearing / falling off of heavy

objects. This can also lead to malfunctions - such as keys ceasing to

produce sound.

 Do not bend, drop, strong shock or vibration.

 Never strike or apply strong pressure to the display.

 Cautions when moving this Instrument: Since this product is very heavy,

you must make sure that a sufficient number of people are on hand to

help, so you can lift and move it safely, without causing strain. Make sure

to have a firm grip, to protect yourself from injury and the instrument

from damage. If you need to move the instrument, consult with your

retailer, or Global Organ Group B.V.

User Manual Ecclesia T-255 / T-355 / D-455

8

1.5 Cautions and important notes

Indoor use only.

Connect the power cord to an outlet of the correct voltage. The Instrument should be

connected to a power supply only of the type described as marked under the keyboard

deck of Instrument.

When power cord plug has an earth-pin: Make sure that this is connected to an

earthed mains (wall) socket-outlet.

Do not connect or disconnect the power cord with wet hands. Never handle the power

cord or its plugs with wet hands when plugging into, or unplugging from, an outlet.

Turn off the Instrument if an abnormality or malfunction occurs. Immediately turn the

Instrument off, remove the power cord from the outlet, and request servicing by your

retailer, or Global Organ Group B.V., when:

• The power-supply cord or the plug has been damaged; or

• If smoke or unusual odor occurs; or

• Objects have fallen into, or liquid has been spilled onto the Instrument; or

• The Instrument has been exposed to rain (or otherwise has become wet); or

• The Instrument does not appear to operate normally or exhibits a marked change in

performance.

Do not use overseas, foreign countries. Before using the Instrument in a foreign

country, consult with your retailer, or Global Organ Group B.V.

Presence of children. For their safety, adults should make sure that children under the

age of 16 use the instrument properly and that the Instrument is in a stable position. An

adult should always be present to supervise and guide any use by a child. Due to the

weight of the instrument, it is recommended that it be securely fixed to the wall or floor

by a professional to prevent tipping over. This is despite the fact that all safety

precautions have been taken to avoid accidents.

Do not connect this Instrument to same electrical outlet that is being used by an

electrical appliance that is controlled by an inverter or a motor (such as a refrigerator,

washing machine, microwave oven, or air conditioner). Depending on the way in which

the electrical appliance is used, power supply noise may cause this Instrument to

malfunction or may produce audible noise. If it is not practical to use a separate

electrical outlet, connect a power supply noise filter between this Instrument and the

electrical outlet.

Do not share an outlet with an unreasonable number of other devices. Do not force

the Instrument’s power-supply cord to share an outlet with an unreasonable number of

other devices. Be especially careful when using extension cords—the total power used

by all devices you have connected to the extension cord’s outlet must never exceed the

power rating (watts/amperes) for the extension cord. Excessive loads can cause the

insulation on the cord to heat up and eventually melt through - therefore always

completely unwind an extension cord.

Energy consumption: By using efficient, energy-saving technology (internal LEDs,

switching power supplies and amplifiers), a high efficiency is achieved. The instrument is

equipped with a AC mains power switch that switches off the instrument completely, so

that no (standby) power is consumed in the off position.

User Manual Ecclesia T-255 / T-355 / D-455

9

To prevent malfunction and equipment failure, always make sure to turn off the

power on all your equipment before you make any connections.

Although the LCD and LEDs are switched off when the Instrument is turned off, this does

not mean that the Instrument has been completely disconnected from the source of

power. If you need to turn off the power completely, first turn off the Instrument’s

switch, then unplug the power cord from the power outlet. For this reason, the outlet

into which you choose to connect the power cord’s plug should be one that is within

easy reach and readily accessible.

If there is a possibility of lightning strike, disconnect the power cord from the outlet.

Whenever you suspect the possibility of lightning in your area, pull the plug on

the power cord out of the outlet.

Periodically clean the power cord’s plug. At regular intervals, you should unplug

the power plug and clean it by using a dry cloth to wipe all dust and other

accumulations away from its prongs. Also, disconnect the power plug from

the power outlet whenever the Instrument is to remain unused for an extended period

of time. Any accumulation of dust between the power plug and the power outlet can

result in poor insulation and lead to fire.

The settings you were editing will be lost when the Instrument is turned off. If you

want to keep your settings, you must save your settings before turning the Instrument

off.

Place in a well ventilated location. The Instrument should be located so that its location

or position does not interfere with its proper ventilation.

Manage cables for safety. Try to prevent cords and cables from becoming entangled.

Also, all cords and cables should be placed so they are out of the reach of children.

Grasp the plug when connecting or disconnecting the power cord. Always grasp only

the plug on the power-supply cord when plugging into, or unplugging from, an outlet.

Precautions concerning use of bench. When using the bench, please observe the

following points:

• Do not allow two or more persons to sit on the bench.

• Do not adjust the height while sitting on the bench.

Do not remove the speaker grille and speaker. Do not remove the speaker grille and

speaker by any means. Speaker not user replaceable. Shock hazardous voltages

and currents are present inside the enclosure.

Disconnecting power from AC mains. To completely disconnect this apparatus

from the AC mains, disconnect the power supply cord plug from the AC receptacle.

The power supply cord and/or main power switch must be accessible. The mains plug

of the power supply cord shall remain readily accessible. Or, the power switch must be

accessible. The main power switch is the main power disconnect device for this

Instrument.

Therefore, the power switch shall be readily accessible.

Do not use internal connections. Do connect, do not use internal connections for

optional external speakers by yourself. Refer all servicing to your retailer, or Global

Organ Group B.V.

User Manual Ecclesia T-255 / T-355 / D-455

10

1.6 Placement

 Using the Instrument near power amplifiers (or other equipment containing large

power transformers) may induce hum. To alleviate the problem, change the

orientation of this Instrument; or move it farther away from the source of

interference.

 This device may interfere with radio and television reception. Do not use this device in

the vicinity of such receivers.

 Noise may be produced if wireless communications devices, such as cell phones, are

operated in the vicinity of this Instrument. Such noise could occur when receiving or

initiating a call, or while conversing. Should you experience such problems, you should

relocate such wireless devices so they are at a greater distance from this Instrument,

or switch them off.

 Do not expose the Instrument to direct sunlight, place it near devices that radiate

heat, or otherwise subject it to temperature extremes. Also, do not allow lighting

devices that normally are used while their light source is very close to the Instrument

(such as a piano light), or powerful spotlights to shine upon the same area of the

Instrument for extended periods of time. Excessive heat can deform or discolour the

Instrument.

 Do not allow rubber, vinyl, or similar materials to remain on this Instrument for long

periods of time. Such objects can discolour or otherwise harmfully affect the finish.

 Do not allow objects to remain on top of the keyboard or pedal board. This can be

the cause of malfunction, such as keys ceasing to produce sound.

 Do not paste stickers, decals, or the like to this instrument. Peeling such matter off

the instrument may damage the exterior finish.

 Do not put anything that contains water on this Instrument. Also, avoid the use of

insecticides, perfumes, alcohol, nail polish, spray cans, etc., near the Instrument.

Swiftly wipe away any liquid that spills on the Instrument using a dry, soft cloth.

 Due to the weight of the instrument, it is recommended to attach the instrument

securely to the wall or floor by a professional, to avoid tipping. This, although all safety

measures have been taken to avoid any accident.

1.7 Repairs and data

Please be aware that all data contained in the Instrument’s memory may be lost when

the Instrument is sent for repairs. Important data should always be stored, written down

on paper (when possible).

During repairs, due care is taken to avoid the loss of data. However, in certain cases

(such as when circuitry related to memory itself is out of order), we regret that it may

not be possible to restore the data, and Global Organ Group B.V. assumes no liability

concerning such loss of data. Refer all servicing to your retailer, or Global Organ Group

B.V.

User Manual Ecclesia T-255 / T-355 / D-455

11

1.8 Additional precautions

 Please be aware that the contents of memory can be irretrievably lost as a result

of a malfunction, or the improper operation of the Instrument. To protect

yourself against the risk of losing important data, we recommend that you

periodically write down important setting data (when possible).

 Unfortunately, it may be impossible to restore the contents of data that was

stored in the Instrument’s memory once it has been lost. Global Organ Group

B.V. assumes no liability concerning such loss of data.

 Use a reasonable amount of care when using the Instrument’s buttons, sliders,

or other controls; and when using its jacks and connectors. Rough handling can

lead to malfunctions.

 Never strike or apply strong pressure to the display.

 A small amount of heat will radiate from the Instrument during normal

operation.

 To prevent possible hearing damage, do not listen at high volume levels for long

periods. This Instrument, either alone or in combination with an amplifier and

headphones or speakers, may be capable of producing sound levels that could

cause permanent hearing loss. Do not operate for a long period of time at a high

volume level, or at a level that is uncomfortable. If you experience any hearing

loss or ringing in the ears, you should immediately stop using the Instrument,

and consult an audiologist.

 To avoid disturbing others nearby, try to keep the Instrument’s volume at

reasonable levels. You may prefer to use headphones, so you do not need to be

concerned about those around you.

 When you need to transport the Instrument, pack it in shock-absorbent

material. Transporting the Instrument without doing so can cause it to become

scratched or damaged, and could lead to malfunction.

 Do not apply undue force to the music stand while it is in use.

 Some connection cables contain resistors. Do not use cables that incorporate

resistors for connecting to this Instrument. The use of such cables can cause the

sound level to be extremely low, or impossible to hear. For information on cable

specifications, contact the manufacturer of the cable.

 Due to the structural design of this instrument, small pets or other animals could

end up getting trapped inside it. If such a situation is encountered, you must

immediately turn off the Instrument and disconnect the power cord from the

outlet. You should then consult with the retailer from whom the instrument was

purchased, or contact Global Organ Group B.V.

 The explanations in this manual include illustrations that depict what should

typically be shown by the display.

 Note, however, that your Instrument may incorporate a newer, enhanced

version of the system (e.g., includes newer sounds), so what you actually see in

the display may not always match what appears in the manual.

User Manual Ecclesia T-255 / T-355 / D-455

12

2 INSTALLATION

2.1 Installation and connection

2.1.1 Ecclesia T-255

Shown model: Ecclesia T-255 without Solo, or Symphony Voice Package

Installing loudspeakers:

The external loudspeakers have to be installed by an authorized Johannus

installer.

Installing console:

1. Position the Instrument on a stable, horizontal surface.

2. Lean the Instrument slightly backward.

3. Slide the pedal board (D) against the Instrument.

4. Set the Instrument upright.

5. Put the music desk (A) in the groove on the cover of the Instrument.

6. Place the Instrument bench (C) over het pedal board.

7. Make sure the voltage marked on the serial plate (B) of the Instrument

matches the local mains voltage.

8. When power cord plug has an earth-pin: Connect the Instrument to a

earthed mains (wall) socket-outlet.

9. Perform a pedal contact calibration. See § 2.4.

User Manual Ecclesia T-255 / T-355 / D-455

13

2.1.2 Ecclesia T-355

Shown model: Ecclesia T-355 with Symphony Voice Package

Installing loudspeakers:

The external loudspeakers have to be installed by an authorized Johannus

installer.

Installing console:

1. Position the Instrument on a stable, horizontal surface.

2. Lean the Instrument slightly backward.

3. Slide the pedal board (D) against the Instrument.

4. Set the Instrument upright.

5. Put the music desk (A) in the groove on the cover of the Instrument.

6. Place the Instrument bench (C) over het pedal board.

7. Make sure the voltage marked on the serial plate (B) of the Instrument

matches the local mains voltage.

8. When power cord plug has an earth-pin: Connect the Instrument to a

earthed mains (wall) socket-outlet.

9. Perform a pedal contact calibration. See § 2.4.

User Manual Ecclesia T-255 / T-355 / D-455

14

2.1.3 Ecclesia D-455

Shown model: Ecclesia D-455 with Symphony Voice Package

Installing loudspeakers:

The external loudspeakers have to be installed by an authorized Johannus

installer.

Installing console:

1. Position the Instrument on a stable, horizontal surface.

2. Lean the Instrument slightly backward.

3. Slide the pedal board (E) against the Instrument.

4. Set the Instrument upright.

5. Put the music desk (A) in the appropriate slots (B). These slots are in the

outside of the cabinets with draw stops.

6. Place the Instrument bench (D) over het pedal board.

7. Make sure the voltage marked on the serial plate (C) of the Instrument

matches the local mains voltage.

8. When power cord plug has an earth-pin: Connect the Instrument to a

earthed mains (wall) socket-outlet.

9. Perform a pedal contact calibration. See § 2.4.

User Manual Ecclesia T-255 / T-355 / D-455

15

2.2 Opening and closing roll cover

The Instrument can be closed with a wooden roll cover that has a lock. The roll

cover lock is positioned behind the music desk.

Opening

- Put the key in the roll cover lock.

- Turn the key a quarter turn to the left. The lock now comes out.

- Slide the roll cover upwards.

Closing

- Slide the roll cover downwards.

- Press the roll cover lock in.

- Turn the key a quarter turn to the right.

2.3 Adjustable music desk (Ecclesia D-455)

The music desk is adjustable in depth and in height.

To adjust the depth, grasp the music desk on both sides and pull it towards you or

push it away from you.

To adjust the height, squeeze the clamps behind the music desk on both sides and

shift the height.

2.4 Pedal contact calibration

Perform a pedal contact calibration after installing or moving an Instrument.

First activate one or more pedal stops, make sure the Instrument produces

sound.

1. Check if pedal board is tightly pressed against the Instrument and the

Instrument stands on a stable, horizontal surface. Check if each pedal key

produces sound at the desired key depth. Follow steps below when the pedal

board appears un-even or partially not functioning:

2. Remove the Instrument bench and slide the pedal board away from the

Instrument. It may be necessary to lean the Instrument slightly backwards to

do this.

Never leave the key in the area that can be closed!

It is recommended to leave the key in the lock.

Do not pull the music desk too far towards you so that the music desk supports

are drawn out of the support slides.

Do not adjust the music desk with music books on it.

User Manual Ecclesia T-255 / T-355 / D-455

16

3. Now the pedal position set screws on both sides of the Instrument are visible,

see image below. These set screws are to adjust the pedal key depth.

Example image - set screws are to adjust the pedal key depth

Loosen the set screws a little to adjust the positions a little upwards, or

downwards. This moves the magnetically sensitive pedal contact position

relative to the pedal key magnets of the pedal board. Tighten the set screws

at the new pedal key depth position – and remember the set positions.

4. Lean the Instrument slightly backward to slide the pedal board against the

Instrument and set the Instrument upright afterwards.

5. If you want, place the Instrument bench over the pedal board.

6. Repeat step 1 to check the difference and repeat steps 2 to 5 when further

improvement is needed.

2.5 Switch on

Switch on the Instrument with the on/off piston at the right, next to the manuals.

Wait several seconds. Starting the control functions and the settings will take

some time. The lights of the as standard set functions lit up. The settings appear

on the display.

The display shows symbols of the main menu:

A Positions of Expression pedals – see § 4.2

B Visible: USB-memory is inserted, recognized and can be used – see § 3.5

C Visible: Headphones plug is connected – see § 3.3.

D Capture memory location – see § 4.8.2.

E Visible when active, with visible crescendo step – see § 4.2, § 4.10.

F Tuning – see § 5.17

G Temperament – see § 5.16

Abbreviations in menus:

GT = Great

CH = Choir

SW = Swell

PD = Pedal

User Manual Ecclesia T-255 / T-355 / D-455

17

3 DESCRIPTION OF THE INSTRUMENT

3.1 Overview of controls

3.1.1 Ecclesia T-255

A Pedal stops and coupler

B Great stops

C Display

D Great stops and coupler

E Swell stops and coupler

F USB-memory connection

G GEN. EXPR.: General Expression

H SEQ- and SEQ+ pistons (see §4.7)

I STYLE: Organ styles (see §4.4)

J SET

K KT: Keyboard Transfer

L RO: Reeds Off

M CR: Crescendo

N MB : Manual Bass (see §4.6)

O CF : Cantus Firmus (see §4.6)

P TRANS.: Transposer (see §4.7)

Q - and + pistons

R ENTER

S MENU (see §5)

T 0: Recall / Reset

U AC-MAINS switch On/Off piston

Optional Solo and Symphony Voice Package:

- Orchestral solo voices (Solo and Symphony package)

- Orchestral voices (Symphony package only)

User Manual Ecclesia T-255 / T-355 / D-455

18

3.1.2 Ecclesia T-355

A Pedal stops and coupler

B Choir stops and coupler

C Great stops and coupler

D Display

E Swell stops and coupler

F USB-memory connection

G GEN. EXPR.: General Expression

H SEQ- and SEQ+ pistons (see §4.7)

I STYLE: Organ styles (see §4.4)

J SET

K KT: Keyboard Transfer

L RO: Reeds Off

M CR: Crescendo

N MB : Manual Bass (see §4.6)

O CF : Cantus Firmus (see §4.6)

P TRANS.: Transposer (see §4.7)

Q - and + pistons

R ENTER

S MENU (see §5)

T 0: Recall / Reset

U AC-MAINS switch On/Off piston

Optional Solo and Symphony Voice Package:

- Orchestral solo voices (Solo and Symphony package)

- Orchestral voices (Symphony package only)

User Manual Ecclesia T-255 / T-355 / D-455

19

3.1.3 Ecclesia D-455

A Pedal stops and coupler

B Great stops and coupler

C Display

D Great stops and coupler

E Swell stops and coupler

F USB-memory connection

G GEN. EXPR.: General Expression

H SEQ- and SEQ+ pistons (see §4.7)

I STYLE: Organ styles (see §4.4)

J SET

K KT: Keyboard Transfer

L RO: Reeds Off

M CR: Crescendo

N MB : Manual Bass (see §4.6)

O CF : Cantus Firmus (see §4.6)

P TRANS.: Transposer (see §4.7)

Q - and + pistons

R ENTER

S MENU (see §5)

T 0: Recall / Reset

U AC-MAINS switch On/Off piston

Optional Solo and Symphony Voice Package:

- Orchestral solo voices (Solo and Symphony package)

- Orchestral voices (Symphony package only)

User Manual Ecclesia T-255 / T-355 / D-455

20

3.2 Connect and switch on the external device(s)

You can connect external devices (for example, a MIDI device) to the Instrument.

1. Switch off the Instrument and the external device(s).

2. Connect the external device to the Instrument.

3. Switch on the external device.

4. Switch on the Instrument.

3.3 External connections

The external connections are situated below the keyboards, on the left side.

MIDI IN: An input for receiving MIDI codes from other devices.

MIDI MOD: A programmable MIDI output for connecting a sound module or

expander, for example.

MIDI SEQ: A non-programmable MIDI output for connecting a Johannus

Sequencer+ or PC, for example.

PC: PC USB connection for data transfer (with the optional Johannus Intonat

program). Use a short USB2 cable for connection, without an extension cable.

AUX IN: A stereo audio input for playing the sound of an external device through

the amplifiers of the Instrument. For example, an expander connected to the

Instrument through the MIDI MOD can be played through the instrument's

loudspeakers.

AUX OUT: A stereo audio output for connecting an external device (amplifier or

recording device, for example).

PHONES: This connection for a (stereo) headphone is suited for a headphone

with an impedance of 30 Ω or more (see headphone specifications).

Follow the instructions provided in the documentation for the external device(s).

When the headphone is used, the loudspeakers of the organ are switched off

automatically. The headphones symbol will be visible on the display.

Page is loading ...

Johannus Ecclesia T355 User manual

This manual is also suitable for

Johannus Ecclesia T355 User manual

Related papers

Other documents