Assembly Instructions
CRESCENT
Floor Lamp
VERSION 1.2
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
CRESCENT Floor Lamp Page 2 of 5
20 min
3
PARTS INVENTORY
ID DESCRIPTION QTY
LAMP BOTTOM SEGMENT 1
STAND END PIECE 1
BASE 1
LAMP TOP SEGMENT 1
SHADE CONNECTOR 1
BULB BASE 1
BULB E26 6W LED G95 1
SHADE 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
WASHER 1
FLAT WASHER 1
LOCK WASHER 1
BOLT 1
SOCKET WRENCH 1
SCREW 3
TIME
# OF PEOPLE
DIFFICULTY
REQUIRED TOOL
CRESCENT Floor Lamp Page 3 of 5
1A
1B
Ensure that lamp stand (A) is
completely flush with base (C).
!
Page 4 of 5
2
3
CRESCENT Floor Lamp
Pull out cord as
far as possible.
!
Page 5 of 5
4
5
CRESCENT Floor Lamp
×3
/
