Seeed 5.83" Monochrome eInk / ePaper Display Operating instructions

Seeed
Brand
Seeed
Model
5.83" Monochrome eInk / ePaper Display
Type
Operating instructions

This manual is also suitable for

Image to EPD
Instruction Manual
Dalian Good Display Co., Ltd.
GOOD DISPLAY
Contents
1. General Description ....................................................... 3
1.1 Over view .............................................................. 3
1.2 Features ................................................................ 3
1.3 Operating environment ............................................ 3
2. Installation ................................................................... 4
2.1 Installation ............................................................ 4
2.2 Serial driver installation (CH340) ............................. 4
3. Software Introduction .................................................... 5
3.1 Software preview .................................................... 5
3.2 Serial Port Setting ................................................... 5
3.3 Add Picture ............................................................ 6
3.4 Data Transmission .................................................. 7
4. Common Problem .......................................................... 8
4.1 The serial port connection is abnormal ....................... 8
4.1 Data communication failed ....................................... 8
Image to EPD Instruction Manual
www.good-display.com 28
GOOD DISPLAY
1. General Description
1.1 Over view
Image to EPD is a special software for driving e-paper display, and it
integrates some functions including the conversion from image to data and
driving EPD, it’s easy to get the showing instantly on the screen of e-paper
display by inputting the pictures.
1.2 Features
It supports automatic image to data converse and full screen showing.
Supported formats: *.JPG,*.BMP
1.3 Operating environment
Operating system: Windows7, Windows10
Image to EPD Instruction Manual
www.good-display.com 38
GOOD DISPLAY
2. Installation
2.1 Installation
This software is a no installation version. Users just need to double-click
"Image to EPD" when they want to use it.
2.2 Serial driver installation (CH340)
, and then click”setup”.
First, Double-click
Click “OK” after the driver is installed.
Image to EPD Instruction Manual
www.good-display.com 48
GOOD DISPLAY
3. Software Introduction
3.1 Software preview
3.2 Serial Port Setting
First, connect the DEMO board(DESPI-M02) to the computer's USB, and
then select the corresponding serial port number. Open the “Image
to EPD”, the information bar will display the serial port number
available, just select the corresponding port number.
Then click “connect”, you will see “connect is success!”. It means that you have
connected successfully.
Serial Update and Information Cleared
Information Bar
Serial
Connection
Switch Serial Selection Picture Selection Display Updating
Picture rotation
Image to EPD Instruction Manual
www.good-display.com 58
GOOD DISPLAY
3.3 Add Picture
Picture import: Click "Open File" and select the picture which you want to
display.
Image to EPD Instruction Manual
www.good-display.com 68
GOOD DISPLAY
3.4 Data Transmission
1) Write "Image to EPD" program into DESPI-M02
Download the program into DESPI-M02. It needs Keil5, if you didn't setup
Keil5, you could download it through FlyMCU. For related program
download instructions, please go to our official website to read DESPI
development board instruction manual.
2. Download the image data to DESPI-M02.
Click "Display". When the data transmission is ok, the left information bar
will display "Successful handshake". It means that the serial data
communication is successful, and at the same time, the current amount of
data transmitted will be displayed.
Image to EPD Instruction Manual
www.good-display.com 78
GOOD DISPLAY
4. Common Problem
4.1 The serial port connection is abnormal
1) No serial port found: The serial port driver is not installed, the data cable
is abnormal, or the power switch of the DEMO board is turned off.
2) Data cannot be transferred: Check whether the serial port is connected
properly. If not, reconnect the serial cable and restart the software.
4.2 Data communication failed
When the serial port connection is ok, click "Display" after importing the
picture. If there is no “Successful handshake Dates” in the left information
bar, disconnect “connect”, then click “Clear”, re-identify the serial number,
select the correct serial number, try it again.
Image to EPD Instruction Manual
www.good-display.com 88
GOOD DISPLAY
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Seeed 5.83" Monochrome eInk / ePaper Display Operating instructions

Seeed
Brand
Seeed
Model
5.83" Monochrome eInk / ePaper Display
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents