Niigata seiki SB-60LED User manual

Niigata seiki
Brand
Niigata seiki
Model
SB-60LED
Type
User manual

Niigata seiki SB-60LED is a powerful and versatile LED working light with a magnetic base, perfect for a wide range of applications. Its flexible arm allows you to easily position the light where you need it, and the strong magnetic base provides a secure hold on metal surfaces. With a luminosity of approximately 326lm and a light color temperature of 5500K~6000K, this light provides bright, natural illumination. The 1m cord length gives you plenty of reach, and the 600N magnetic holding force ensures that the light will stay securely in place, even on vertical surfaces.

Niigata seiki SB-60LED is a powerful and versatile LED working light with a magnetic base, perfect for a wide range of applications. Its flexible arm allows you to easily position the light where you need it, and the strong magnetic base provides a secure hold on metal surfaces. With a luminosity of approximately 326lm and a light color temperature of 5500K~6000K, this light provides bright, natural illumination. The 1m cord length gives you plenty of reach, and the 600N magnetic holding force ensures that the light will stay securely in place, even on vertical surfaces.

OPERATIONPARTS IDENTIFICATION
SPECIFICATIONS
1. Insert the attached Power Plug into a power source.
2. Press the ON/OFF switch at the rear of the light to turn on
power. Press again to turn off.
LED WORKING LIGHT WITH MAGNETIC BASE INSTRUCTION MANUAL
Model No.: SB-60LED
Thank you for purchasing the LED Working Light With Magnetic Base.
For proper operation, please read this manual thoroughly before use.
I311-K1610
LED Light
Arm (Flexible)
Magnetic Base
AC Plug
ON/OFF Switch
(Rear)
Power: AC100V 50/60Hz
Rated Power: 5W
Protection Fuse: 1A
Fuse is not customer serviceable
Light Color Temperature: 5500K~6000K
Luminosity: Approx 326lm
Cord Length: Approx. 1m
Magnetic Holding Force: Approx. 600N
Dimensions: Approx W70H475D80mm
Weight: Approx 1.6kg
Light ON/OFF Switch
Rear
Magnet ON/OFF
Control Lever
When moving the light to the
right or left, do not twist the lamp
head on the arm as it may cause
damage.
Rotate the Magnetic Base of the
light to turn.
Keep magnet away from precision instruments, watches, and
magnetic storage media.
Check to insure holding force on surface is sufficient before use.
Holding force will be reduced for certain conditions:
If surface metal is thin.
For surface materials other than mild steel plate.
If surface is painted or dirty, or if surface is uneven.
The holding force may not be sufficient to prevent sliding on some
surfaces. For vertical use, pay special attention to make sure
Base will not slide.
On slippery surfaces or vibrating machinery, Base may not hold
as strongly.
Use care when switching ON/OFF magnet. Light may fall if
magnet is switched off without support. To prevent accident,
always support Light when switching magnet Lever ON/OFF.
Do not stare into light for long periods.
Product is NOT waterproof; please do not use in rain or wet
locations. There is risk of electric shock.
Use care not to over-bend the flexible shaft, it may cause
damage.
Keep Magnet Lever in OFF position when not in use.
Light is intended for use in industrial applications, If used in office
or residential environment, please use caution.
Magnet controlled by
ON/OFF lever for
securing the light to
metal surfaces.
Strong magnetic field is
present. Please keep in
OFF position when not in
use.
Flexible arm
can be easily
positioned.
Please Note
Niigata seiki Co., Ltd.
6-15-22, Tsukanome, Sanjo, Niigata, Japan, 955-0055
Tel. : +81-256-31-5670 Fax. : +81-256-39-7730
MAIL [email protected]
URL http://www.niigataseiki.co.jp
CAUTION
  • Page 1 1

Niigata seiki SB-60LED User manual

Niigata seiki
Brand
Niigata seiki
Model
SB-60LED
Type
User manual

Niigata seiki SB-60LED is a powerful and versatile LED working light with a magnetic base, perfect for a wide range of applications. Its flexible arm allows you to easily position the light where you need it, and the strong magnetic base provides a secure hold on metal surfaces. With a luminosity of approximately 326lm and a light color temperature of 5500K~6000K, this light provides bright, natural illumination. The 1m cord length gives you plenty of reach, and the 600N magnetic holding force ensures that the light will stay securely in place, even on vertical surfaces.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents