2. Glamox heating
  3. 3001 EIB slave module

Glamox heating 3001 EIB slave module User manual

  • I've examined the datasheet for the Glamox EIB-slave heating module. It details how the module is regulated by a 3.5-5V signal and works with US/U 2.2 and US/U 4.2 interfaces. I'm ready to answer your questions about its features and functionality.
  • What voltage is needed to activate the EIB-slave module?
    What devices can control the EIB-slave module?
    How does the EIB-slave module work?
EIB-slave
Slavemodul for Glamox ovner serie 3001
Regulated by 3,5-5 Volt.
EIB-slave
EIB-slave module for Glamox heating.
EIB-slave module for Glamox heating appliances
may be controlled by the universal interface US/U
2.2 (two channels) and US/U 4.2 (four channels).
When a signal voltage in the range of 3,5-5 volt is
applied to the EIB-slave input wire, the heater will
switch on and will continue to heat as long as the
signal voltage is present.
The US/U 2.2 and US/U 4.2 device is usually
regulated by a room thermostat.
/