DeWalt DWBL700 User manual

Page is loading ...

English (original instructions) 1

Français (traduction de la notice d’instructions originale) 7

Español (traducido de las instrucciones originales) 17

ENGLISH

1

English (original instructions)

Definitions: Safety Alert Symbols and Words

This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk

of personal injury or property damage.



DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or seriousinjury.



WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or seriousinjury.



CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderateinjury.



(Used without word) Indicates a safety related message.

NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in propertydamage.



WARNING! Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

seriousinjury.

WARNING: To reduce the risk of injury, read the

instructionmanual.

If you have any questions or comments about this or

any

DeWALT tool, call us toll free at:

1–800–4-

DeWALT (1–800–433–9258).

1

Trigger switch

2

Speed lock lever

3

Handle

4

Tube

5

Cord retainer

6

Large end nozzle

7

Narrow end nozzle

8

Wide end nozzle

Fig. A

1

2

876

4

3

5

ENGLISH

2

IMPORTANT SAFETY WARNINGS



WARNING: When using an electric tool, basic safety

precautions should always be followed to reduce risk

of fire, electric shock, and personal injury, including

the following.



WARNING: To reduce risk of injury:

• Before any use, be sure everyone using this unit reads and

understands all safety instructions and other information

contained in this manual.

• Save these instructions and review frequently prior to use

and in instructing others.

• Do not point unit discharge at self or bystanders.

• Keep long hair and loose clothing away from openings

and moving parts.

• This appliance is intended for commercial use.



WARNING: Some dust created by this product

contains chemicals known to the State of California to

cause cancer, birth defects or other reproductive harm.

Some examples of these chemicals are:

- compounds in fertilizers

- compounds in insecticides, herbicides and

pesticides

- arsenic and chromium from chemically treated

lumber

To reduce your exposure to these chemicals, wear approved

safety equipment such as dust masks that are specially

designed to filter out microscopic particles.

READ ALL AND UNDERSTAND ALL

INSTRUCTIONS BEFORE USING

General Safety Warnings and Instructions

for All Tools



WARNING: Read all safety

warnings and all instructions. Failure to follow the

warnings and instructions may result in electric shock,

fire and/or serious injury.

• ALWAYS WEAR EYE PROTECTION – Wear safety glasses

or goggles that conforms to ANSI Z87.1 (CAN/CSA Z94.3)

at all times when this unit is in use. Also use face or dust

mask. Safety glasses are available at extra cost at your

local

DeWALT Service Center or authorized service facility.

• DO NOT place outlet of blower near eyes or ears when

operating.

• STORE IDLE UNITS. When not in use, the unit should be

stored in a dry, high or locked-up place - out of reach of

children.

• DON’T OVERREACH. Keep proper footing and balance at

all times.

• MAINTAIN UNIT WITH CARE. Keep unit clean for best

and safest performance. Follow instructions for proper

maintenance.

• DO NOT attempt to repair the blower. To assure product

safety and reliability, repairs, maintenance, and

adjustments should be performed by

DeWALT service

centers or authorized service centers, always using

DeWALT replacement parts.

• DO NOT operate blower in a gaseous or explosive

atmosphere. Motors in these units normally spark, and the

sparks might ignite fumes.

• AVOID DANGEROUS ENVIRONMENTAL CONDITIONS – Do

not use electric units in damp or wet locations. Don’t use

the unit in the rain.

• STAY ALERT - Watch what you are doing. Use common

sense. Do not operate unit when you are tired.

• USE THE RIGHT UNIT – Do not use this unit for any job

except that for which it is intended.

• USE EXTRA CARE when cleaning on stairs.

• DO NOT allow to be used as a toy. Close attention

is necessary when used by or near children. Not

recommended for use by children.

• DO NOT attempt to clear clogs from unit without first

unplugging.

• USE ONLY as described in this manual. Use only

manufacturer’s recommended attachments.

• DO NOT put any objects into openings. Do not use with

any opening blocked; keep free of dust, lint, hair and

everything that may reduce air flow.

• KEEP hair, loose clothing, fingers, and all parts of body

away from openings and moving parts.

• DO NOT immerse any part of the unit in liquid.

• KEEP CHILDREN, BYSTANDERS AND ANIMALS AWAY from

the work area a minimum of 30 feet (10 meters) when

starting or operating the unit.

• INSPECT THE AREA before using the unit. Remove all debris

and hard objects such as rocks, glass, wire, etc. that can

ricochet, be thrown, or otherwise cause injury or damage

during operation.

• DO NOT leave appliance when plugged in. Unplug from

outlet when not in use and before servicing.

• DO NOT use with damaged cord or plug. If appliance is

not working as it should, has been dropped, damaged, left

outdoors, or dropped into water, return it to a service center.

• DO NOT pull or carry by cord, use cord as a handle, or pull

cord around sharp edges or corners. Keep cord away from

heated surfaces.

• DO NOT unplug by pulling on cord. To unplug, grasp the

plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Turn off all controls before unplugging.

• This appliance is provided with double insulation. Use only

identical replacement parts. See instructions for Servicing

of Double-Insulated Appliances.

• To reduce the risk of electric shock, use only with an extension

cord intended for outdoor use, such as SJW or SJTW.

• Make sure your extension cord is in good condition and

is the correct size for your appliance. The Minimum

Gauge for Cord Sets chart below shows the correct size

to use depending on cord length and nameplate ampere

rating. If in doubt, use the next heavier gage. The smaller

ENGLISH

3

the gage number, the heavier the cord. An undersized

extension cord will cause a drop in line voltage resulting in

loss of power and overheating

• Maintain Appliance With Care – Inspect extension cords

periodically and replace if damaged.

• To reduce the risk of disconnection of appliance cord from

the extension cord during operating:

i) Make a knot as shown in figure B; or

ii) Use one of the plug-receptacle retaining straps or

connectors described in this manual.

OR

iii) Secure the extension cord to the appliance plug as

shown or described in the Operating Instructions.

fig. B



WARNING: To reduce the risk of personal injury

due to a loose electrical connection between the

appliance’s plug and extension cord, firmly and fully

attach the appliance plug to the extension cord.

Periodically check the connection while operating to

ensure it is fully attached. Do not use an extension

cord that provides a loose connection. A loose

connection may result in overheating, fire, and

increases the risk of a burning.



WARNING: Always wear proper personal hearing

protection that conforms to ANSI S12.6 (S3.19)

during use. Under some conditions and duration of use,

noise from this product may contribute to hearing loss.



WARNING: ALWAYS use safety glasses. Everyday

eyeglasses are NOT safety glasses. Also use face or dust

mask if operation is dusty. ALWAYS WEAR CERTIFIED

SAFETY EQUIPMENT:

- ANSI Z87.1 eye protection (CAN/CSA Z94.3),

- ANSI S12.6 (S3.19) hearing protection,

- NIOSH/OSHA/MSHA respiratory protection.



WARNING: To reduce the risk of electrical shock; do

not expose to rain. Store indoors.



WARNING: Cut Hazard. Turn off and unplug unit,

then wait until fan stops or at least 10 seconds before

removing the blower or vacuum tube assemblies.

Servicing of Double Insulated Appliances

Your Blower/Vac is double-insulated to give you added

safety. In a double insulated appliance, two systems of

insulation are provided instead of grounding. No grounding

means is provided on a double insulated appliance, nor

should a means for grounding be added to the appliance.

Servicing a double insulated appliance requires extreme

care and knowledge of the system and should be done

only by qualified service personnel. Replacement parts for

a double insulated appliance must be identical to the parts

they replace. A double insulated appliance is marked with

the words double insulated or “double insulation”. The

symbol (square within a square) may also be marked on the

appliance.

Safety Rules and Instructions:

Extension Cords

Double insulated tools have 2-wire cords and can be used

with 2-wire or 3-wire extension cords. Only round jacketed

extension cords should be used, and we recommend that

they be listed by Underwriters Laboratories (U.L.) (C.S.A. in

Canada). If the extension will be used outside, the cord must

be suitable for outdoor use. Any cord marked as outdoor

can also be used for indoor work.

An extension cord must have adequate wire size (AWG or

American Wire Gauge) for safety, and to prevent loss of

power and overheating. The smaller the gauge number of

the wire, the greater the capacity of the cable, that is 16

gauge has more capacity than 18 gauge. When using more

than one extension to make up the total length, be sure

each individual extension contains at least the minimum

wire size. Before using an extension cord, inspect it for loose

or exposed wires, damaged insulation, and defective fittings.

Make any needed repairs or replace the cord if necessary.

Minimum Gauge for Cord Sets

Volts

Total Length of Cord in Feet

(meters)

120 V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)

240 V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)

Ampere Rating

American Wire Gauge

More

Than

Not

More

Than

0 6 18 16 16 14

6 10 18 16 14 12

10 12 16 16 14 12

12 16 14 12 Not Recommended

Safety Rules and Instructions:

Polarized Plug

To reduce the risk of electric shock, this equipment has

a polarized plug (one blade is wider than the other). This

equipment must be used with a suitable polarized 2 wire or

3 wire extension cord. Polarized connections will fit together

only one way. Make sure that the receptacle end of the

extension cord has large and small blade slot widths. If the

plug does not fit fully into the extension cord, reverse the

plug. If it still does not fit, obtain a suitable extension cord. If

the extension cord does not fit fully into the outlet, contact a

qualified electrician to install the proper outlet. Do not change

the tool plug or extension cord in any way.

The label on your tool may include the following symbols. The

symbols and their definitions are asfollows:

V ......................... volts

Hz .......................hertz

min ..................... minutes

or DC ......direct current

...................... Class I Construction

(grounded)

…/min ..............per minute

BPM .................... beats per minute

ENGLISH

4

IPM ..................... impacts per minute

RPM .................... revolutions per

minute

sfpm ................... surface feet per

minute

SPM .................... strokes per minute

A ......................... amperes

W ........................watts

or AC ...........alternating current

or AC/DC .... alternating or

direct current

...................... Class II

Construction

(double insulated)

no .......................no load speed

n .........................rated speed

......................earthing terminal

...................... safety alert symbol

..................... visible radiation

..................... wear respiratory

protection

..................... wear eye

protection

..................... wear hearing

protection

SAVE THESE

INSTRUCTIONS FOR

FUTURE USE

COMPONENTS (FIG. A)



WARNING: Never modify the power tool or any part

of it. Damage or personal injury couldresult.

Refer to Figure A at the beginning of this manual for a

complete list ofcomponents.

INTENDED USE

This appliance is designed for professional outdoor

blowerapplications.

DO NOT use under wet conditions or in presence of

flammable liquids orgases.

This appliance is a professional power tool. DO NOT let

children come into contact with the tool. Supervision is

required when inexperienced operators use thistool.

ASSEMBLY AND ADJUSTMENTS



WARNING: To reduce the risk of serious personal

injury, turn unit off and unplug before making

any adjustments or removing/installing

attachments or accessories. An accidental start-up

can causeinjury.



CAUTION: The tube must be attached to the

housing

9

before use.

1. TUBE ASSEMBLY:

fig. C

10

9

4

11

12

To attach the tube

to the blower, line

up the pegs

10

on the bottom of

the tube with the

notch

11

on the

bottom of the

housing opening

as shown in

figureC. Push the tube into the blower housing until the

lock engages the tube.

2. Pull on the tube to ensure it is securely in place.

3. To remove the tube, insert a screwdriver into the

unlocking hole

12

on the side of the housing. Lift the

tab inside and pull tube out.

Attaching Nozzles (Fig. D)

1. Line up the channels

13

of the desired nozzle

6

,

7

, or

8

with the nubs

14

on the tube

4

.

2. Slide the nozzle onto the tube.

3. Firmly twist the nozzle to lock the nubs completely into

the recesse of the nozzle. Ensure the nozzle is securely

attached.

fig. D

14 13

6

Attaching Extension Cord To Blower

(Fig. A, E)



WARNING: Do not use with tube removed.



WARNING: Ensure the trigger switch is not engaged to

reduce the risk of starting the appliance accidentally.

1. Near the end of the extension cord

15

, fold the

extension cord to create a loop.

2. Feed the loop into the bottom hole

16

of the cord

retainer

5

as shown in figure E.

3. Slide the loop over the hook

17

of the cord retainer so

it rests fully in the cord retainer.

4. Plug the extension cord into the power head

18

.

fig. E

15

16

17

18

OPERATION



WARNING: Do not operate blower without tube

securely in place. Never reach down into housing

through tube hole.

Proper Hand Position (Fig. F)



WARNING: To reduce the risk of serious personal injury,

ALWAYS use proper hand position as shown.



WARNING: To reduce the risk of serious personal injury,

ALWAYS hold securely in anticipation of a sudden

reaction.

ENGLISH

5

Proper hand position requires one hand on the main

handle

4

.

fig. F

4

Switching On (Fig. A, F, G)



CAUTION: Do not point unit discharge at self or

bystanders.



CAUTION: Always wear safety glasses. Wear a filter

mask if the operation is dusty. Use of gloves, long

pants and substantial footwear is recommended. Keep

long hair and loose clothing away from openings and

moving parts.

To turn the blower on, depress the trigger switch

1

.

To lock the blower on,

fig. G

pull back on the speed

lock lever

2

, as

shown in figureG. The

blower runs at higher

speeds as the lever is

moved further. The

speed lock lever can

also be pulled back to start the blower without needing to

first depress the trigger switch.

• Hold the blower with one hand as shown in figureF and

sweep from side to side with the tube

4

several inches

above the hard surface. Slowly advance keeping the

accumulated pile of debris in front of you.

MAINTENANCE



WARNING: To reduce the risk of serious personal

injury, turn unit off and unplug before making

any adjustments or removing/installing

attachments or accessories. An accidental start-up

can causeinjury.

Cleaning



WARNING: Blow dirt and dust out of all air vents with

clean, dry air at least once a week. To minimize the risk

of eye injury, always wear ANSI Z87.1 approved eye

protection when performingthis.



WARNING: Never use solvents or other harsh

chemicals for cleaning the non-metallic parts of

the tool. These chemicals may weaken the plastic

materials used in these parts. Use a cloth dampened

only with water and mild soap. Never let any liquid

get inside the tool; never immerse any part of the tool

into aliquid.

Accessories



WARNING: DO NOT use the blower with any type

of accessory or attachment. Such usage might be

hazardous.



WARNING: Since accessories, other than those

offered by DeWALT, have not been tested with this

product, use of such accessories with this tool could be

hazardous. To reduce the risk of injury, only DeWALT

recommended accessories should be used with

thisproduct.

Recommended accessories for use with your tool

are available at extra cost from your local dealer or

authorized service center. If you need assistance in

locating any accessory, please contact

DeWALT Industrial

Tool Co., 701East Joppa Road, Towson, MD 21286, call

1–800–4-DeWALT (1–800–433–9258) or visit our website:

www.dewalt.com.

Repairs



WARNING: To assure product SAFETY and

RELIABILITY, repairs, maintenance and adjustment

(including brush inspection and replacement) should

be performed by a

DeWALT factory service center

or a DeWALT authorized service center. Always use

identical replacementparts.

Register Online

Thank you for your purchase. Register your product nowfor:

• WARRANTY SERVICE: Registering your product will

help you obtain more efficient warranty service in case

there is a problem with yourproduct.

• CONFIRMATION OF OWNERSHIP: In case of

an insurance loss, such as fire, flood or theft, your

registration of ownership will serve as your proof

ofpurchase.

• FOR YOUR SAFETY: Registering your product will

allow us to contact you in the unlikely event a safety

notification is required under the Federal Consumer

SafetyAct.

Register online at www.dewalt.com/register.

ENGLISH

6

Three Year Limited Warranty

DeWALT will repair, without charge, any defects due to

faulty materials or workmanship for three years from

the date of purchase. This warranty does not cover part

failure due to normal wear or tool abuse. For further detail

of warranty coverage and warranty repair information,

visit www.dewalt.com or call 1–800–4-

DeWALT (1–800–

433–9258). This warranty does not apply to accessories

or damage caused where repairs have been made or

attempted by others. This warranty gives you specific legal

rights and you may have other rights which vary in certain

states orprovinces.

In addition to the warranty,

DeWALT tools are covered

byour:

1 YEAR FREE SERVICE

DeWALT will maintain the tool and replace worn parts

caused by normal use, for free, any time during the first year

afterpurchase.

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of

your

DeWALT Power Tool, Laser, or Nailer for any reason, you

can return it within 90 days from the date of purchase with

a receipt for a full refund – no questionsasked.

LATIN AMERICA: This warranty does not apply to products

sold in Latin America. For products sold in Latin America,

see country specific warranty information contained in

the packaging, call the local company or see website for

warrantyinformation.

FREE WARNING LABEL REPLACEMENT: If your warning

labels become illegible or are missing, call 1–800–4-

DeWALT

(1–800–433–9258) for a freereplacement.

Page is loading ...

DeWALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286

The following are trademarks for one or more DeWALT power tools: the yellow and black color scheme, the “D” shaped air

intake grill, the array of pyramids on the handgrip, the kit box configuration, and the array of lozenge-shaped humps on the

surface of the tool.

DeWALT BATTERY AND CHARGER SYSTEMS

Chargers/Charge Time (Minutes)

Chargeurs/Durée de charge (Minutes)

Cargadores de baterías/Tiempo de carga (Minutos)

Battery

Cat #

Output

Voltage

120 Volts 12 Volts

DC9000

DC9310

DC9320

DCB095

DCB101

DCB102

DCB103

DCB107

DCB112

DCB113

DCB114

DCB115

DCB118

DCB132

DCB119

DW0249

DCB606 60/20 X X X X 100 100 100 272 170 140 X 90 60 90 X X

DCB404 40 X X X X X X X X X X 90 X X X X X

DCB406 40 X X X X X X X X X X 130 X X X X X

DC9360 36 45 X X X X X X X X X X X X X X X

DCB361 36 45 X X X X X X X X X X X X X X X

DC9280 28 60 X X X X X X X X X X X X X X X

DW0242 24 X X X X X X X X X X X X X X X 60

DCB200 20 X X X X 60 60 60 140 90 67 X 45 45/30** 45 90 X

DCB201 20 X X X X 30 30 30 70 45 35 X 22 22 22 45 X

DCB203 20 X X X X 35 35 35 90 60 45 X 30 30 30 60 X

DCB203BT* 20 X X X X 35 35 35 90 60 45 X 30 30 30 60 X

DCB204 20 X X X X 70 70 70 185 120 90 X 60 60/40** 60 120 X

DCB204BT* 20 X X X X 70 70 70 185 120 90 X 60 60 60 120 X

DCB205 20 X X X X 95 95 95 240 150 112 X 75 75/47** 75 150 X

DCB207 20 X X X X 30 30 30 60 40 30 X 22 22 22 X X

DC9182 18 X 40 40 X X X 40 X X X X X X X X 40

DCB120 12 X X X X 30 30 30 60 45 35 X 20 X X 45 X

DCB127 12 X X X X 35 35 35 90 60 50 X 30 X X 60 X

DCB080 8 X X X 60 X X X X X X X X X X X X

*BT - Bluetooth® NOTE: The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth®,

SIG, Inc. and any use of such marks by

DeWALT is under license. Other trademarks and trade names are those of their

respective owners.

**Battery Datecode 201536 or later.

“X” Indicates that the battery pack is not compatible with that specific charger. All charge times are approximate. Actual

charge time may vary. Read the instruction manual for more specific information.

“X” indique que le bloc-piles n’est pas compatible avec ce chargeur. Les durées de charge sont approximatives; la durée de

charge rélle peut varier. Lire le manuel d’utilisation pour obtenir des renseignements plus précis.

Una “X” indica que el paquete de baterías no es compatible con ese determinado cargador. El tiempo de duración de carga es

aproximado; la duración de carga real puede variar. Lea el manual de instrucciones para obtener información más precisa.

DeWalt DWBL700 User manual

DeWalt DWBL700 User manual

in other languages

Related papers

Other documents