Glacier Bay 67706-0001 Installation guide

Glacier Bay
Brand
Glacier Bay
Model
67706-0001
Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

Glacier Bay 67706-0001 is a pull-down kitchen faucet that comes with a variety of features to make your kitchen tasks easier. The faucet has a high-arc spout that provides plenty of clearance for filling pots and pans, and the pull-down spray head gives you the flexibility to clean dishes and rinse the sink. The faucet also features a single-handle design that makes it easy to control the water flow and temperature. Additionally, the faucet is made from durable materials that are resistant to corrosion and wear, ensuring that it will last for years to come.

Glacier Bay 67706-0001 is a pull-down kitchen faucet that comes with a variety of features to make your kitchen tasks easier. The faucet has a high-arc spout that provides plenty of clearance for filling pots and pans, and the pull-down spray head gives you the flexibility to clean dishes and rinse the sink. The faucet also features a single-handle design that makes it easy to control the water flow and temperature. Additionally, the faucet is made from durable materials that are resistant to corrosion and wear, ensuring that it will last for years to come.

THANK YOU
INSTALLATION AND CARE GUIDE
Model#
67706-0001
67706-0008D2
PULL-DOWN KITCHEN FAUCET
We appreciate the trust and condence you have placed in Schön through the purchase of this kitchen faucet.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full
line of products available for your home improvement needs. Thank you for choosing Schön!
4/2016REV.01YOW
SKU#
729107
729108
Questions, problems, missing parts?
Call Schön Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
(800) 880-8164
www.schonsimplymodern.com
Phillips
screwdriver
2
Table of Contents
Important Information ..............................2
Warranty ...................................................2
Pre-Installation .........................................2
Planning Installation ..............................2
Package Contents ..................................3
Installation ................................................4
Care and Cleaning ....................................8
Troubleshooting ........................................8
Service Parts
...........................................
9
Important Information
□ Observe all local plumbing and building codes.
□ Cover the sink drain to avoid losing any parts.
□ Review the care and cleaning section included in this guide.
Pre-Installation
PLANNING INSTALLATION
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
Contents list. If any part is missing or damaged, do not attempt to install the product. Contact customer service
for replacement parts.
TOOLS AND HARDWARE REQUIRED
Adjustable
wrench
Safety
goggles
(2) Supply
lines
SILICONE
Silicone
sealant
Tools and Hardware Required ...............2
Operation...................................................7
Warranty
LIMITED LIFETIME WARRANTY
Schön products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Schön products are warranted to the original consumer purchaser to be free of defects
in materials or workmanship. We will replace FREE OF CHARGE any product or parts that prove defective.
Simply, call (800) 880-8164 to receive the replacement item. Proof of purchase (original sales receipt) from the
original consumer purchaser must be made available for all Schön warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please contact (800) 880-8164 for more details.
3
Pre-Installation (continued)
PACKAGE CONTENTS
Part Description Quantity
A 1
B Plastic washer 1
C Metal washer 1
D Nut 1
Faucet assembly
E 2
H Escutcheon 1
Screw
I 1Gasket
F 1
J Weight 1
K Weight clip 1
Quick connector
G 1Flange
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.
A
C
B
D
E
G
H
I
J
K
F
4
Installation
1
Preparing for installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
□ Shut off the water supply.
□ Unscrew the nut (D), and remove the
washers (B & C).
2
Installing the faucet assembly
□ Before installation, ensure that the ange (G)
is placed on the bottom of the new faucet
assembly (A).
□ Insert the faucet body through the hole in the
sink.
NOTE: If installing the faucet assembly (A) without the
escutcheon, begin with step 2. If installing the faucet
assembly (A) with the escutcheon, begin with step 3.
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 3.
A
C
B
D
E
A
G
5
Installation (continued)
3 4
Securing the faucet assembly
□ Install the plastic washer (B), and metal washer
(C) onto the threaded mounting shank.
□ Thread the nut (D) onto the mounting shank.
Lock the nut (D) into position by tightening the
screws (E). Do not overtighten.
NOTE: If the sink is uneven, use silicone under the
gasket (I).
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 2.
Installing the faucet assembly
□ Place the escutcheon (H) and the gasket (I) on
the bottom of the new faucet assembly (A).
□ Insert the faucet assembly (A) through the hole
in the escutcheon (H).
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.
G
A
H
I
□ Before installation, remove the ange (G).
C
B
D
E
A
6
Installation (continued)
6
Installing the weight
□ Insert the weight (J) onto the clip (K) by sliding
it down onto the clip (K).
□ Install the weight clip (K) at the point of the
hose marking “weight here”.
5
Attaching the quick connector
to the receiving block
□ Push the quick connector (F) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
1
F
J
K
J
Weight
here
Weight
here
K
7
Making the water supply
connections
□ Thread the nut (1) on the supply line onto the
outlet of the water supply valve (2) and tighten
with a wrench. Do not overtighten.
NOTE: The hot side inlet tube is indicated by a label. Avoid
twisting wires together or placing the wires close to each
other and damaging.
1
2
7
Operation
1
Flushing and checking for leaks
□ Pull the hose assembly out of the spout and
remove the spray head by unscrewing it from
the hose in a counterclockwise direction. Be
sure to hold the end of the hose down into the
sink and turn the faucet to the warm position
where it mixes hot and cold water.
□ Flush the water lines for one minute. This ushes
away any debris that could cause damage to
internal parts. Check for leaks.
□ Re-tighten any connections if necessary, but do
not overtighten. Reinstall the spray head by hand
tightening it back onto the spray hose in a
clockwise direction.
IMPORTANT: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Do not lose
the gasket (1) in the hose.
2
Removing the quick connector
□ If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.
2
Squeeze
Pull
down
1
1
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.
1
8
Care and Cleaning
□ To clean, wipe down with a damp cloth and dry with a towel.
Troubleshooting
Problem Possible Cause Solution
There are leaks
underneath the handle.
The bonnet nut has come loose and the
o-ring on the cartridge is dirty or damaged.
□ Tighten the bonnet nut. Clean
or replace the o-ring.
The aerator leaks or has
an inconsistent water
ow pattern.
The aerator is dirty or mistted.
The cartridge may be clogged.
□ Remove the aerator and check
for debris in the aerator screens.
□ Remove the cartridge and check
for debris.
□ Do not use abrasive cleaners, steel wool, or harsh chemicals when cleaning this faucet, or the warranty will
be voided.
NOTE: Refer to the service parts section in this manual for
a detailed drawing showing the location of the parts listed
below.
□ Ensure the aerator is properly
installed.
There are leaks from the
hose underneath the deck.
The hose and discharge tube connection
may be loose.
□ Tighten the connection between
the discharge tube and hose.
The hose does not retract. The weight is not installed in the
appropriate position.
□ Reinstall or readjust the weight.
The water pressure is low. The connector underneath the deck is
clogged with debris.
The aerator is clogged.
□ Turn off the water supply and
disconnect the connector
/ aerator.
□ Unscrew the connector / aerator
and clean under running water.
□ Screw the connector / aerator
back.
□ Test water ow. If water
pressure is still low then replace
the connnector / aerator.
There is no hot or cold
water.
The water inlet hose was acccidentally
kinked during installation and is limiting
the water ow through.
□ Reinstall the water inlet hose.
9
Service Parts
*Specify Finish
Many replacement cartridges, aerators, and drain
assemblies can be purchased at your local The
Home Depot store or online at
www.schonsimplymodern.com
Part Description Part Number
1 RP38307*
2 O-ring RP60071
4 Cartridge RP20044
5 Bonnet nut RP70548
6 Cap RP80132*
7 Screw RP50015
8 Handle RP13450*
9 Set screw
RP50002
11 Block RP70421
Spray head and Hose
3 Wearable ring RP70561
10 Handle seat RP17126*
12 O-ring RP60002
13
Quick connect
assembly
RP70479
14 O-ring RP60089
15 Weight RP70441
18 Metal washer RP64146
Part Description Part Number
16 Weight clip RP64204
19 Nut RP56077
20 Screw RP50004
23 Gasket RP80557
22 Escutcheon RP80556*
21 Flange RP80079*
Faucet ID tags can
be found on the
hot water inlet
17 Plastic washer RP64131
11
12
13
14
15
1
2
3
4
5
6
7
8
9
10
16
17
18
19
20
21
22
23
Questions, problems, missing parts?
Call Schön Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday
9 a.m. - 6 p.m., EST, Saturday
(800) 880-8164
www.schonsimplymodern.com
Retain this manual for future use.
Page is loading ...
Page is loading ...
A 1
B Arandela plástica 1
C Arandela metálica 1
D Tuerca 1
Ensamblaje del grifo
E 2
H Placa protectora 1
Tornillo
I 1Junta
F 1
J Peso 1
K Sujetador con peso 1
Conector rápido
G 1Brida
13
Pre-instalación (continuación)
CONTENIDO DEL PAQUETE
Pieza Descripción Cantidad
www.schonsimplymodern.com
Para obtener asistencia, llama al (800) 880-8164.
A
C
B
D
E
G
H
I
J
K
F
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30

Glacier Bay 67706-0001 Installation guide

Glacier Bay
Brand
Glacier Bay
Model
67706-0001
Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Glacier Bay 67706-0001 is a pull-down kitchen faucet that comes with a variety of features to make your kitchen tasks easier. The faucet has a high-arc spout that provides plenty of clearance for filling pots and pans, and the pull-down spray head gives you the flexibility to clean dishes and rinse the sink. The faucet also features a single-handle design that makes it easy to control the water flow and temperature. Additionally, the faucet is made from durable materials that are resistant to corrosion and wear, ensuring that it will last for years to come.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents