Schon 65710N-B8401 Installation guide

USE AND CARE GUIDE

Model #65710N-B8401

65710N-B8408D2

PULL-DOWN KITCHEN FAUCET

REV.01YOW

THANK YOU

We appreciate the trust and condence you have placed in Schön through the purchase of this kitchen faucet.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full

line of products available for your home improvement needs. Thank you for choosing Schön!

Questions, problems, missing parts?

Call

Schön Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

(800) 880-8164

www.schonsimplymodern.com

2

Table of Contents

Safety Information ....................................2

Warranty ...................................................2

Pre-Installation .........................................2

Planning Installation ..............................2

Tools Required .......................................2

Package Contents ..................................3

Installation ................................................4

Operation...................................................8

Care and Cleaning ....................................8

Service Parts

...........................................

9

Safety Information

Please read and understand this entire manual before

attempting to assemble, operate, or install the product.

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

Warranty

LIMITED LIFETIME WARRANTY

Pre-Installation

PLANNING INSTALLATION

Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package

Contents section. If any part is missing or damaged, do not attempt to install the product.

TOOLS REQUIRED

Adjustable

wrench

Safety

goggles

Phillips

screwdriver

SILICONE

Silicone

(2) Supply

lines

Basin

wrench

Schön products are manufactured with superior quality standards and workmanship and are backed by our

limited lifetime warranty. Schön products are warranted to the original consumer purchaser to be free of defects

in materials or workmanship. We will replace FREE OF CHARGE any product or part that proves to be defective.

Simply, call (800) 880-8164 to receive the replacement item. Proof of purchase (original sales receipt) from the

original consumer purchaser must be made available for all Schön warranty claims.

This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and

tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended

duration of warranty.

Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other

rights that vary from state to state and province to province. Please contact (800) 880-8164 for more details.

3

Pre-Installation (continued)

PACKAGE CONTENTS

Part Description Quantity

A 1

B Rubber washer 1

C Metal washer 1

Faucet assembly

D 1Nut

Part Description Quantity

E 1

F Escutcheon 1

G Gasket 1

Quick connector

H 2

I Weights 1

Mounting nut

J 1

K Body assembly 1

L Nut 1

Pump

M 1Bottle

A

B

C

D

E

F

G

H

I

J

K

L

M

www.schonsimplymodern.com

Please contact (800) 880-8164 for further assistance.

4

Installation

1

Preparing for installation

CAUTION: Always turn off the water supply before

removing an existing faucet or replacing any part of a

faucet. Open the faucet handle to relieve water pressure

and ensure that the water is completely shut off.

□ Shut off the water supply.

□ Before installation, remove the quick connector (E)

from the free end of the hose by unscrewing it in a

counterclockwise direction.

□ Unscrew the nut (D), and remove the

washers (B & C).

2

Installing the faucet assembly

□ Insert the faucet body through the hole in the

sink.

NOTE: If installing the faucet assembly (A) without the

escutcheon, begin with step 2. If installing the faucet

assembly (A) with the escutcheon, begin with step 3.

NOTE: This step is for no escutcheon installation (optional).

If the escutcheon will be used, install the faucet assembly

as described in step 3.

A

E

D

B

C

5

Installation (continued)

3

Installing the escutcheon

□ Ensure that the gasket (G) is pressed onto the

escutcheon (F) before the escutcheon (F) is

installed over the three holes in the sink.

□ From underneath sink, hand tighten the

mounting nuts (H). Do not overtighten.

4

Installing the faucet assembly

□ Insert the faucet assembly (A) through the hole

in the escutcheon (F).

NOTE: If the sink is uneven, use silicone under the

gasket (G).

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 2.

NOTE: This step is for escutcheon installation (optional).

If the escutcheon will not be used, install the faucet

assembly as described in step 2.

B

C

D

5

Securing the faucet assembly

□ Install the rubber washer (B), and metal washer

(C) onto the threaded mounting shank.

□ Thread the nut (D) onto the mounting shank

using the basin wrench. Do not overtighten.

F

A

F

G

H

www.schonsimplymodern.com

Please contact (800) 880-8164 for further assistance.

6

Installation (continued)

6

Attaching the quick connector

to the hose

□ After inserting the hose through the hole in the

sink surface, reattach the quick connector (E)

by screwing it onto the threaded end of the

hose (1) in a clockwise motion. Hand tighten

only.

7

Attaching the quick connector

to the receiving block

□ Push the quick connector (E) rmly upward and

attach it to the receiving block (1). Pull down

moderately to ensure the connection has been

made.

□ After connecting the hose, install the weights (I)

at the lowest point of the hose.

1

E

Weights

here

1

I

E

7

Installation (continued)

8 9

Making the waterline

connections

□ Thread the nut (1) on supply line onto outlet of

water supply valve (2) and tighten with wrench.

Do not overtighten.

Installing the soap dispenser

□ Insert the body assembly (K) through the

selected hole in the sink. Secure the body

assembly to the sink with the nut (L).

□ From under the sink, screw the bottle (M) onto

the body assembly (K) shank. Insert the pump

(J) down into the body assembly (K).

1

2

J

L

M

K

www.schonsimplymodern.com

Please contact (800) 880-8164 for further assistance.

8

Installation (continued)

10

Remove the quick connector

□ If it is necessary to remove the quick connector

(1), squeeze the tabs (2) on the quick connector

and then pull down to disconnect.

Operation

1

Flushing and checking for leaks

□ Pull the hose assembly out of the spout and

remove the spray head by unscrewing it from

the hose in a counterclockwise direction. Be

sure to hold the end of the hose down into the

sink and turn the faucet on to the warm position

where it mixes hot and cold water.

□ Flush the water lines for one minute. This ushes

away any debris that could cause damage to

internal parts. Check for leaks.

□ Re-tighten any connections if necessary, but do

not overtighten. Reinstall the spray head by hand

tightening it back onto the spray hose.

Care and Cleaning

□

□ Do not use abrasive cleaners when cleaning this faucet.

2

Squeeze

Pull

down

1

IMPORTANT: After installation is completed, turn on the

hot and cold water supplies. Check for leaks. Do not lose the

gasket (1) in the hose.

1

9

Service Parts

*Specify Finish

Part Description Part Number

1 RP38227*

2 O-ring RP60006

3 Wearable ring RP64092

4 Cartridge RP20005

5 Bonnet RP70010

6 Cap RP80028*

7 Handle RP13131*

8 Set screw RP50002

9 Rubber washer

RP64087

Spray head and Hose

10 Metal washer RP64088

11 Nut RP56045

Part Description Part Number

12 RP70137

13 O-ring RP60024

14

Quick connect

assembly

RP70479

15 Escutcheon RP80226*

16 Gasket RP70172

17 Mounting nut RP56036

18 Bolt RP50071

19 Block RP70421

20 O-ring

RP60002

Weights

21 Pump kit RP46018

1

2

3

4

5

6

7

8

15

16

17

9

10

11

12

13

14

19

20

21

22

23

24

18

22 Flange kit RP46028*

23 Bottle

RP46002

24 Soap dispenser RP46007*

www.schonsimplymodern.com

Please contact (800) 880-8164 for further assistance.

Questions, problems, missing parts?

Call

Schön Customer Service

8 a.m. - 6 p.m., EST, Monday - Friday

(800) 880-8164

www.schonsimplymodern.com

Retain this manual for future use.

Page is loading ...

Schon 65710N-B8401 Installation guide

Schon 65710N-B8401 Installation guide

in other languages

Related papers

Other documents