Ericsson DIALOG 4220 LITE User manual

Dialog 4220 Lite/Dialog 4222 Office

System telephones for MD110 Communication System

User Guide

Flinders University

Ericsson Dialog 4222

Table of Contents

Description ……………………………… 2

Incoming Calls…………………………... 10

Outgoing Calls…………………………... 12

During Calls……………………………… 18

Call Forwarding…………………………. 23

Group Features…………………………. 33

Other Useful Features………………….. 35

Settings…………………………………... 38

Accessories……………………………… 45

Installation……………………………….. 49

Glossary…………………………………. 55

Index……………………………………… 56

1

Ericsson Dialog 4222

Description

1 Display (Dialog 4222 Office Only)

2x20 characters. See section “Display information” on

page 7.

2 Programming

See Section “Settings” on page 38.

2

Ericsson Dialog 4222

3 Call-back

For indicating/activating Call-back. See Section “When

you receive a busy tone” on page 14. The feature can be

removed or moved to another programmable function key

by your system administrator.

4 Diversion (Follow-me)

For indicating/activating and deactivating Diversion

(Follow-me). See section “Call Forwarding” on page 23.

The feature can be removed or moved to another

programmable key by your system administrator.

5 Programmable function keys

To program numbers of functions, see section

“Programming of function keys” on page 38.

6 Transfer

For transferring call, see section “During Calls” on page

20.

7 Triple Access Line

For handling calls, Line 1 and 2 are available both for

incoming and outgoing calls. Inquiry can only be used for

outgoing calls.

8 Microphone (Dialog 4222 Office only)

Used for handsfree conversation.

9 Clear

To disconnect calls or exit a function. Can always be

pressed instead of replacing the handset.

10 Headset Key

To handle headset calls.

11 Loudspeaker on/off

a. To activate Group listening. See section “During

Calls” on page 18.

b. To activate handsfree conversation (Dialog 422

Office only see section “During Calls” on page 13.

3

Ericsson Dialog 4222

12 Mute

a. To switch the microphone on or off during call. See

section “Mute” on page 19.

b. To switch off the ring signal in idle more or when

ringing. See sections “Mute ring signal” on page 43

and “Silent ringing” on page 44.

13 Volume control

To change the volume. See section “Settings” on page

38.

14 Loud Speaker

15 Handset

Supplied with hearing aid function as standard. An extra

handset can be connected, see section “Accessories” on

page 45.

16 Pull-out leaf for easy guide (optional)

17 Key panel (optional, Dialog 4222 Office Only)

With 17 programmable keys. One panel can be

connected. See section “Key panel (optional)” on page

45.

18 Designation Card

You system administrator can print new designation

cards for you.

4

Ericsson Dialog 4222

Lamp Indicators

5

Ericsson Dialog 4222

Tones and Signals

The following different tones and signals are sent from

the exchange to your phone.

Tone characteristics

The tones shown in this section are the most used tones

worldwide. Many markets use a different tone for one or

more situations.

Ring Signals

Three different ring signals inform you about the type of

the incoming call. The signals shown in this section are

the most used signals worldwide. Many markets use

signals that are adapted for the local standards.

6

Ericsson Dialog 4222

Display Information

Notes:

The Display is only available on the 4222 Office Phone.

There are two versions of display text, an earlier and a later version.

Both versions are shown in this section.

The order in which the date is stated is system dependent.

The display gives you feedback information such as time

and date, traffic state and connected phone numbers.

The following displays show examples of the different

states your phone is in.

For the later display text version:

When information ends with three dots (...), this means

that the system is working or waiting for your action.

When information ends with an exclamation mark (!), this

means that no further action is possible.

Idle phone (idle mode)

When your phone is idle, the upper row shows general

information. The lower row shows your extension

number. In example below, the extension number is

2222.

Earlier version:

Later version:

7

Ericsson Dialog 4222

Outgoing call

When you make an outgoing call on your phone, the

upper row shows the traffic state and the lower row

shows the dialled number.

Earlier version:

Later version:

If the called party’s phone is diverted, the upper row

shows the dialled number and Diversion information. For

the later version, > is the Diversion symbol.

Earlier version:

Later version:

The dialled number (3333) is directly diverted to number

5555.

8

Ericsson Dialog 4222

Incoming call

When you receive an incoming call, the upper row flashes

the calling party’s extension number.

If a diverting extension is calling, the upper row shows the

diversion information. The calling party’s number is

flashing on the lower row. For the later version, > is the

Diversion symbol.

Earlier version:

Later version:

Number 2222 has dialled number 4444 and the call is

directly diverted to you.

Choice of Language(optional)

One of the following languages can be chosen to be used

for the display information on your phone.

Digit 0-9 =the language code:

Note: By default 5-9 are programmed for English. To be

changed locally to other languages.

To choose a language:

Dial.

Enter the language code.

Press.

9

Ericsson Dialog 4222

Incoming Calls

Answer calls

A ringing signal and a flashing lamp indicate an incoming

call.

On line 1

Normally you will receive calls on Line 1.

Lift the handset.

On any other Line key

Lift the handset.

Press the flashing line key

Handsfree

(Dialog 4222 Office phone only)

Press the flashing line key.

You are connected to the caller via the loudspeaker and

the microphone.

Press to terminate a handsfree call.

10

Ericsson Dialog 4222

On another extension

You can answer a call to a phone in another room.

Call the ringing extension

Press

Notes:

You can also press Call pick up (function key programmed by

system administrator).

Answer a second call during and ongoing call

If your phone is programmed with a Free on 2

nd

key, you

can receive another call, if this function is activated.

Press to activate/deactivate.

When Free on 2 is active lamp is lit.

Note: Function Key programmed by your system administrator.

You have an ongoing call Line 1, when Line 2 flashes to

indicate a new incoming call:

Press to answer.

The first call is put on hold

Press to switch back to the first call

The second call is put on hold. You are connected to the

first caller.

Press to terminate the connected call

11

Ericsson Dialog 4222

Outgoing Calls

Make calls

How to make internal and external calls:

Lift the handset and proceed depending on call type:

Internal calls

Dial the extension number.

External calls

Press the digit or digits to get an external line.

Dial tone.

Dial the external number.

Replace the handset or press to end the call.

Note: If you receive a queue tone when the digit or digits to get

an external line are dialled (optional function Least Cost Routing

is used in the system), keep waiting. Once a line becomes free

you will receive a dial tone. If a warning tone is heard, the

selected line is marked “Expensive”.

12

Ericsson Dialog 4222

Handsfree

(Dialog 4222 Office phone only)

Dial the number

You are connected via the loudspeaker and the

microphone.

Press to terminate a handsfree call.

Note: You can make your calls faster by using common Speed

dialling numbers and by using your own programmed function

keys. See section “Speed Dialling” on page 15.

Last External Number Redial

When you initiate an external call the system

automatically stores all the dialled digits, irrespective of

whether the call was successful or not.

Lift the handset

Dial to repeat the stored number.

The last external number is automatically redialled.

Notes:

You also press Last Number Redial (function Key programmed

by the system administrator).

13

Ericsson Dialog 4222

When you receive a busy tone

If you call an extension and receive a busy tone, or get no

answer you can use any of the following methods.

Call-back

If a called extensions is busy or there is no answer:

Press

It can take a couple of seconds before the procedure was

executed.

Notes:

You can also press: Call-back (function key programmed by

system administrator).

Replace the handset to finish procedure

You are called back (recall ringing signal) when the

ongoing call is finished or the next time a new call is

finished. You have to answer within 8 seconds;

otherwise the Call-back service is cancelled. While

waiting for Call-back you can make and receive calls as

normal.

Lift the handset when you are called back

The system calls the ext.

Note: Call-backs can be activated on several extensions at

the same time. Call-backs from additional lines will recall on

Line 1.

Cancel any single Call-back

Dial and enter the ext number.

Press

Cancel all Call-backs

Dial

Press

14

Ericsson Dialog 4222

Bypass

If this function is allowed from your extension, you can

bypass an; activated diversion or activated follow me on a

specific extension.

Dial and enter the extension number.

Press and wait for answer.

Speed Dialling

Common Speed Dialling numbers

By using common speed dialling numbers, you can make

calls simply by pressing a few keys. The common speed

dialling numbers consist of 1-5 digits and are stored in the

exchange by your system administrator.

Lift the handset and dial the common Speed Dialling

number.

Individual Speed Dialling numbers

You can program ten frequently used phone numbers on

the digit keys 0-9 and use them as individual Speed

Dialling numbers (if this function is allowed).

To use:

Dial and press the relevant digit.

To program and alter Individual Speed Dialling numbers:

Dial and press the selected digit.

Press and dial the phone number

Press

15

Ericsson Dialog 4222

Note: The programmed number may consist of a maximum

of 20 digits plus

which indicates the second dial tone from

the public network.

To erase one programmed number:

Dial and press selected digit.

Press

To erase all programmed numbers:

Dial

Press

Dial by a function key

Both functions and phone numbers can be programmed

on a function key. To programme a key, speak to your

system administrator.

Press the function key.

16

Ericsson Dialog 4222

Authorisation Code (Optional)

If you are assigned an authorisation code (1 to 7 digits),

affiliated to your own ext you can change the access level

on your ext. You can use the code for one call or you can

open the phone to some calls and lock it when leaving

the phone.

To use for a single call:

Dial.

Enter authorisation code and press

Verification tone.

Dial 0 to get an external line, and then dial the

external number.

To open an ext for some calls:

Dial

Enter authorisation code and press.

Verification tone.

To lock an extension:

Dial

Enter authorisation code and press.

Verification tone.

17

Ericsson Dialog 4222

During Calls

Group Listening (Loudspeaking)

This function lets other people in your room listen to your

phone conversation. You speak in the handset while the

other party’s voice is heard on the speaker.

During an ongoing conversation:

Press to switch between loudspeaker and handset.

When the key lamp is lit, the other party’s voice is heard

on the loudspeaker.

Note: You can adjust the volume, See section “Settings” on

page 38.

From loudspeaking to handsfree

(Dialog 4222 Office phone only).

Replace the handset.

Handsfree conversation

From handsfree to loudspeaking

(Dialog 4222 Office phone only).

Lift the handset and press.

Press to end the call.

18

Ericsson Dialog 4222

Handsfree

(Dialog 4222 Office phone only).

Press and replace the handset

Handsfree conversation

Press to end the call.

From handsfree to handset

Lift the handset

Conversation via the handset

Mute

Press to switch the microphone on or off.

When the lamp is lit, the person on the line cannot hear

what is being said in your room.

Inquiry

You have a voice connection on Line 1and want to make

an inquiry to an internal or external party.

Press

This first party is put on hold (Line 1 flashes slowly).

Note: You can also press Line 2

Call the Third Party

When the other party answers, you can switch between

the calls, Transfer the call, create a conference and end

one of the calls.

Press to end inquiry or call.

The third party is disconnected

Press to return to first call.

19

Page is loading ...

Ericsson DIALOG 4220 LITE User manual

This manual is also suitable for

Ericsson DIALOG 4220 LITE User manual

Related papers

Other documents