2. Astria Fireplaces
  3. Mega Flame Mossy Oak LMF 24/30/36 MO

Astria Fireplaces Mega Flame Mossy Oak LMF 24/30/36 MO Instruction Sheet

  • Hello! I've reviewed the instructions for the IHP FM100 Floor Media Kit. This kit includes fiber logs and volcanic stone to enhance the look of your fireplace. It's crucial to follow the instructions regarding placement to avoid sooting. I'm ready to answer your questions about this kit and its installation.
  • What does the floor media kit do?
    What should be done before installing?
    Where should volcanic stone be placed?
    What should not be added to the fireplace?
    Where should floor media be placed?
FM100 FLOOR MEDIA KIT
[FOR USE WITH APPLIANCE MODELS BLAZE&GLOW18/24, BGE18/2436, TRIFLAME18/24, TF18/2430, MAGNIFLAME24/30, MAGNAFLAMEOD24/30, MNF24/30,
NORTHERNOAK27, SOMERSET27, FVFM27, EOS18, MONTEBELLO18/24, SHERIDAN18/24, VF18/24, VD1824, VS1824]
FM100 FLOOR MEDIA KIT
P/N 115579-01
Rev. C, 01/2021
HEARTH PRODUCTS
KITS AND ACCESSORIES
Cat. No. Model Description
F1762 FM100 Floor Media Kit
REQUIRED TOOLS AND SUPPLIES
None
GENERAL INFORMATION
The floor media kit is used to give a more natural appearance to the
fireplace floor where the gas log set is installed.
READ ALL THE STEPS BEFORE STARTING THE INSTALLATION
THE APPLIANCE MUST BE OFF AND COLD BEFORE BEGINNING.
ALL WARNINGS, PRECAUTIONS AND INSTRUCTIONS IN THE
INSTALLATION AND OPERATION MANUAL PROVIDED WITH THE
APPLIANCE APPLY TO THESE INSTRUCTIONS.
If you encounter any problems, need clarification of these instructions
or are not qualified to properly install this kit, contact you local
distributor or dealer.
If any of these parts are missing or damaged, contact your dealer or
IHP.us.com for referral information.
KIT CONTENTS
6 ea. Fiber Log Pieces
1 ea. Volcanic Stone
1 ea. Instruction Sheet
WARNING
• Make sure the unit is turned off and cool before
adding floor media material to fireplace floor.
• Do not add extra logs or ornaments such as pine
cones, vermiculite or glowing embers (rockwool).
Using these added items can cause sooting. Use
only the material included in this kit.
• Do not place volcanic stone, embers or fiber log
pieces on logs or burners. This may cause sooting.
Place floor media material only on the fireplace floor.
Figure 1 - FM100 Floor Media Kit
IHP.us.com 1
Printed in U.S.A. © 2004 Innovative Hearth Products
P/N 115579-01 Rev. C 01/2021
IHP reserves the right to make changes at any time, without notice, in design, materials, specifica-
tions, prices and also to discontinue colors, styles and products. Consult your local distributor
for fireplace code information.
1769 East Lawrence Street, Russellville, AL 35654
INSTALLING FLOOR MEDIA KIT
1. Place volcanic stone on the hearth/fireplace floor around the base
of the log set. No volcanic stone shall cover any portion of the
burner ports and/or pilot.
2. Place decorative log pieces randomly on volcanic stone. No log
pieces shall be placed on or near any burner or pilot. No log pieces
shall have flames impinging or contacting them as this can cause
sooting.
/