2. Hampton Bay
  3. 13H-001-7GH

Hampton Bay 13H-001-7GH Operating instructions

  • Hello! I have reviewed the user guide for the Hampton Bay Madison Shutter Back 13H-001-7GH dining set. This document includes information on assembly, maintenance and warranty of your dining set. I'm ready to answer your questions about its features, care instructions, and warranty.
  • How often should I check the tightness of the bolts?
    Can I use bleach to clean the dining set?
    How should I clean the cushions?
    What should be used to clean the tabletop?
THANK YOU
USE AND CARE GUIDE
7-PIECE MADISON SHUTTER BACK GATHERING HEIGHT DINING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. - 6.00 p.m., EST, Monday - Friday
1-877-527-0313
HAMPTONBAY.COM
Model #13H-001-7GH
(66 in. x 40 in. Stonehenge Dining Table)
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Hampton Bay!
Item #587-124
2
Table of Contents
Safety Information
DANGER: Please keep children out of the assembly area
during assembly.
WARNING: Do not sit or stand on the table.
CAUTION:
IMPORTANT: ta stlob eht fo ssenthgit eht kcehc esaelP
least every 90 days.
NOTE: Level the table with glides at the bottom of each
leg.
Warranty
5 YEAR FRAME / 1 YEAR FABRIC AND TABLETOP LIMITED WARRANTY
WHAT IS COVERED
r one year.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
s warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Table of Contents.......................................................
Safety Information......................................................
Warranty.....................................................................
5 Year Frame Limited Warranty, 1 Year Table Top Limited
Pre-Assembly...........................................................
Planning Assembly.......................................................
Hardware Included......................................................
Package Contents .......................................................
Assembly .................................................................
Warranty 1 Year Fabric Limited Warranty ........................
2
2
2
2
3
3
3
4
5
What is Covered..........................................................2
What is Not Covered.....................................................2
Care Instructions........................................................ 2
WARNING: Do not put heavy objects on the table.
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat the frame with liquid wax for maximum protection against
UV light and salty, damp air. When not in use, store furniture in a cool, dry place. If your set includes cushions or mesh fabric, they may
be cleaned by hand with a mild solution of soap and water. Rinse cushions thoroughly and allow to drip dry. Do not machine wash or
tumble dry, as cushions may shrink. Do not use bleach or solvents on fabrics. When cleaning the tabletop make sure to use a soft,
clean cloth that doesn’t bleed color as well.
You may contact our customer service department with any questions by phone at 1-877-527-0313 or visit www.hamptonbay.com.
Care Instructions
3 HAMPTONBAY.COM
Pre-Assembly
PLANNING ASSEMBLY
It will take two people about 20 minutes to complete the assembly process.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA Bolt (M6x20) 8
BB Bolt (M6x25) 16
CC Washer 24
DD Bolt cap 30
Please contact 1-877-527-0313 for further assistance.
AA BB CC DD
EE
Hex wrench
1
FF
EE
FF
Umbrella hole cover
1
4
)deunitnoc( ylbmessA-erP
PACKAGE CONTENTS
Part Description Quantity
A Table top 1
B Table leg 4
rotcennoc gel poT C 1
A
B
C
D
rotcennoc gel mottoB D 1
E
E Shutter decoration inset 1
5 HAMPTONBAY.COM
Assembly
1 Attaching the top leg connector to the
table legs
2 Attaching the bottom leg connector to
the table legs
□ Attach four table legs (B) to the top leg connector (C) with
bolts (BB) and washers (CC) using the hex wrench (FF).
IMPORTANT: Hand tighten the bolts (BB) only. Do not over
tighten.
Please contact 1-877-527-0313 for further assistance.
B
C
BB
CC
B
D
□ Attach the bottom leg connector ring (D) to the four table legs
with bolts (BB) and washers (CC) using the hex wrench (FF).
IMPORTANT: Hand tighten the bolts (BB) only. Do not over
tighten.
C
BB
CC
BB
CC
BB
CC
B
D
C
A
CC
AA
3 Attaching the table base
□ Place the table top (A) upside down on a clean smooth surface.
□ Attach the top of each of the table legs (B) to the table top (A)
with washers (CC) and bolts (AA) using the hex wrench (FF).
□ Completely tighten all the bolts (AA) and (BB).
CC
AA
6
4Attaching the bolt caps 5 Attaching the shutter decoration inset
□ Cover all the bolts with the bolt caps (DD). □ Turn over the table.
□
Place the shutter decoration inset (E) into the table top (A),
with the front side up.
Assembly (continued)
A
A
C
DB
D
B
C
DD
DD DD
DD
DD
DD
6 Leveling the table
□ Level the table with the glides at the bottom of each leg.
E
□Ensure the glides are not missing and are level before
each use.
EE
□
Cover the umbrella hole on the shutter decoration inset (E)
with the umbrella hole cover (EE).
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8.00 a.m. – 6.00 p.m., EST, Monday-Friday
1-877-527-0313
HAMPTONBAY.COM
Retain this manual for future use.
/