IAN 291069
STEREO TV SOUNDBASE
BARRA DE SONIDO ESTÉREO PARA TV
SBS 60 B2
STEREO TV SOUNDBASE
Operation and safety notes
BARRA DE SONIDO ESTÉREO PARA TV
Instrucciones de utilización y de seguridad
US-EN Operation and safety notes Page 3
US-ES Instrucciones de utilización y de seguridad Página 23
3 US-EN
Introduction ............................................................Page 4
Intended use ...............................................................Page 4
Trademark notice ...........................................................Page 4
Scope of delivery ...........................................................Page 4
Parts description ............................................................Page 5
Technical data .............................................................Page 6
Important safety instructions ........................................Page 7
Safety ....................................................................Page 10
Safety warnings for batteries ..................................................Page 12
Before use – preparation.............................................Page 14
Prepare the remote control ....................................................Page 14
First-time use ...........................................................Page 14
Replace the remote control battery (Fig. A).......................................Page 14
Placing TV or monitor ........................................................Page 14
Before use – connections .............................................Page 15
Use the HDMI ARC connection ................................................Page 15
Use the OPTICAL connection ..................................................Page 16
COAXIAL socket ............................................................Page 16
Use the AUX sockets.........................................................Page 17
Connection to power socket ...................................................Page 17
Using the product......................................................Page 18
Standby / ON .............................................................Page 18
Select modes ..............................................................Page 18
Adjust the volume / Mute volume...............................................Page 18
Select the equaliser..........................................................Page 18
AUX 1 / AUX 2 / HDMI ARC /OPTICAL / COAXIAL operation ....Page 18
Bluetooth operation..................................................Page 19
Pair Bluetooth®-enabled devices ................................................Page 19
Listen to music from Bluetooth® device ...........................................Page 19
USB operation..........................................................Page 20
Charging other devices via USB port ............................................Page 20
Troubleshooting........................................................Page 20
Glossary ..................................................................Page 21
Cleaning and storing ..................................................Page 21
Disposal.................................................................Page 21
Three year limited warranty .........................................Page 22
4 US-EN
STEREO TV SOUNDBASE
DESCRIPTION OF
SIGNAL WORDS
WARNING indicates a hazardous situation
that, if not avoided, could result in death or
serious injury.
CAUTION indicates a hazardous situation
that, if not avoided, could result in minor or
moderate injury.
NOTICE indicates information considered
important, but not hazard related (e.g.
messages related to property damage).
CUSTOMER SERVICE
Call customer service at
1 (844) 543-5872
Visit the Website Customer
Service Platform at
www.lidl.com/contact-us
Visit a LIDL store for further assistance.
IAN 291069 Please have your
IAN number ready.
Introduction
Congratulations on your purchase. You have
selected a quality product. The instructions for use
are a part of the product. They contain important
information about the safety, use and disposal
of the product. Before using the product, please
learn about all the safety information and usage
instructions. Only use the product as described
and for the specified applications. If you lend the
product to someone else, please also give all the
instructions.
Note: The soundbase is mainly referred as “the
product” in this manual.
Intended use
This is a consumer electronics product. The
soundbase is intended for playing sound from
audio devices. The product must only be used
indoors. The product is designed for private use,
and must not be used for commercial purposes.
Any other use is considered improper. Any
claims resulting from improper use or due to
unauthorized modification of the product will be
considered unwarranted. Any such use is at your
own risk.
Trademark notice
USB® is a registered trademark of USB
Implementers Forum, Inc.
The Bluetooth word mark and logos are
registered trademarks of Bluetooth SIG, Inc.
and any use of such marks by LIDL US, LLC is
under license.
The SilverCrest trademark and trade name
are the property of their respective owners.
Any other names and products may be
trademarks or registered trademarks of their
respective owners.
Scope of delivery
Immediately after unpacking, please check
the package contents for completeness and
if the product and all parts are in good
condition.
Remove all parts from the packaging. Remove
the packaging materials completely.
1 Remote control
(included CR2025 3 V battery inserted)
1 AC power cord
1 Cinch to 3.5 mm jack plug cable
1 HDMI ARC cable
1 Instructions for use
Design and specifications are subject to change
without notice.
5 US-EN
Parts description
Soundbase (main unit)
Top view
6105 7 8 9
11 12 13 14 15 1716
1 2 3 4 4
Front view
Back view
1 button (switch the product between ON
and STANDBY mode)
2 button (select source)
3 EQ button (select a preset sound effect)
4 VOL+ / VOL- buttons (increase / decrease
the volume level)
5 Remote control sensor
6 POWER indicator (lights up red when the
product is in STANDBY mode)
7 AUX1 / AUX2 indicator
(orange indicator lights up: In AUX1 mode /
orange indicator flashes: In AUX2 mode)
8 Bluetooth® indicator (blue indicator lights up:
in Bluetooth® mode)
9 OPTICAL / COAXIAL indicator
(orange indicator lights up: In OPTICAL
mode / orange indicator flashes: In COAXIAL
mode)
10 HDMI ARC / USB indicator (orange indicator
lights up: In HDMI ARC mode / orange
indicator flashes: In USB mode)
11 I/O switch (POWER ON / OFF)
12 Power socket
13 COAXIAL socket
14 OPTICAL socket
15 USB socket
16 AUX 1 / AUX 2 input
17 HDMI ARC socket
6 US-EN
Remote control
22
18
19
20
21
18 button (switch the product between ON
and STANDBY mode)
19 SOURCE buttons (select playback source)
20 Playback control buttons
Skip to previous track / skip to next track in
Bluetooth® mode and USB mode.
/ PAIR
(Play / pause / resume playback in
Bluetooth® mode and USB mode.
Press and hold this button to activate the
pairing function in Bluetooth® mode and
disconnect the existing paired Bluetooth®
device)
VOL+ / VOL–
(Increase / decrease the volume level)
21 MUTE (mute or unmute the sound)
22 EQ buttons (select a preset sound effect)
(NIGHT MODE & BASS ON / OFF button:
Press and hold the TV key to activate the night
mode. Press and hold the SONG key to set
the bass OFF. Press and hold the SONG key
again to set the bass ON)
23 Battery tray (fig. A, page 14)
Technical data
Protection class of the
product: / II
Standby power
consumption: < 0.5 W
USB audio format
support: MP3
Input: • AUX IN 1/2
2 x 3.5 mm stereo
jack socket
• HDMI (ARC) 1 x
HDMI ARC socket
• OPTICAL IN
1 x optical input
• COAXIAL IN:
1 x COAXIAL IN
• USB: 1 x USB socket
Input signal
(coaxial / optical): PCM 2.0
Operating conditions: 50 °F – 104 °F /
10 °C – 40 °C,
40 % – 85 %
relative humidity
Storage temperature: –4 °F – 140 °F /
–20 °C to + 60 °C
Operating voltage /
frequency:
AC 120 V~(alternating
current) 60 Hz
Maximal power
consumption: 30 W
Output power RMS: 15 W x 2 + 30 W
USB socket: 5 V (direct current),
max. 500 mA
Total harmonic
distortion: 1 % (1 kHz, 1 W)
Audio input sensitivity
(analog input): 500 mV
Impedance: 4 Ω x 2 + 6 Ω
Frequency response: 40 Hz – 20 kHz
Dimension: 20.67 in x 2.99 in x
11.85 in (52.5 cm x
7.6 cm x 30.3 cm)
Weight: 8.1 lb / 3.7 kg
7 US-EN
Bluetooth®
Wireless standard: Bluetooth® V4.2
Range: max 32 ft / 10 m
Frequency band: 2.4 – 2.4835 GHz
Max. transmitted
power: < 20 dBm
Infrared remote control
Range: 19.7 ft / 6 m
Angle: 30°
Battery type: CR2025
Important
safety
instructions
READ ALL INSTRUCTIONS.
KEEP FOR FUTURE
REFERENCE. INCLUDE ALL
DOCUMENTATION WHEN
PASSING THIS PRODUCT ON
TO OTHERS.
Failure to observe the
following warnings may
result in serious or fatal
injuries.
DANGER TO LIFE
AND RISK OF
ACCIDENTS FOR
INFANTS AND
CHILDREN!
Never leave children
unsupervised with the
packaging materials.
The packaging materials pose
a suffocation hazard. Children
frequently underestimate the
dangers. Always keep children
away from the packaging
materials.
This product is not intended
for use by persons (including
children) with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the product by a per son
responsible for their safety.
Children should be supervised
to ensure that they do not play
with the product.
FOR HOUSEHOLD USE ONLY.
Changes or modifications
to this product not expressly
approved by the party
responsible for compliance
could void the user‘s ability to
operate the product.
Do not touch hot surfaces. Use
handles or knobs.
To protect against electrical
shock do not immerse supply
cord, plugs, or (state specific
part or parts in question) in
water or other liquids.
8 US-EN
Close supervision is necessary
when the product is used by or
near children.
Unplug from the wall outlet when
not in use and before cleaning.
Allow to cool before putting on
or taking off parts.
Do not operate the product with
a damaged supply cord or plug
or after it malfunctions or has
been damaged in any manner.
Return it to the nearest authorized
service facility for examination,
repair, or adjustment.
The use of accessory attachments
not recommended by the product
manufacturer may cause injuries.
Do not let the supply cord hang
over the edge of table or counter,
or touch hot surfaces.
Do not place on or near a hot
gas or electric burner, or in a
heated oven.
Extreme caution must be used
when moving the product
containing hot oil or other hot
liquids.
Always attach the plug to the
product first, then plug the supply
cord into the wall outlet. To
disconnect, turn any control to
“off”, then remove the plug from
the wall outlet.
Do not use the product for any
other than the intended use.
Children may not play with the
product.
Do not operate the
product in explosive
environments, where
inflammable liquids or
gases are located.
ATTENTION! Never leave
the product unattended during
operation.
FIRE HAZARD! Do not
operate the product in
the proximity of or below
curtains, wall cupboards
or other inflammable
materials.
Never immerse the main unit 12
in water.
A short supply cord is provided
to reduce the risk resulting
from becoming entangled in or
tripping over a longer cord.
An extension cord may be used
if care is exercised during use.
–If an extension cord is used:
1) The marked electrical
rating of the extension cord
should be at least as great
as the electrical rating of
the product;
9 US-EN
2) The extension cord should
be arranged so that it
will not drape over the
countertop or tabletop
where it can be pulled on
by children or tripped over
unintentionally; and
3) If the product is of the
grounded type, the
extension cord should be
a grounding-type 3-wire
cord.
Avoid danger to life
by electric shock
Never touch the product, the
supply cord or the power plug
with wet hands.
Make sure that the details
on the rating label are in
conformity with your supply
voltage. Only connect the
product to alternating current
with a grounding contact as
this provides protection against
electric shock.
Do not operate this product
with an external timer or a
separate remote control system,
such as a wireless remote
control socket.
Check the supply cord regularly
for damage or wear.
Never let the supply cord
become wet or damp during
operation.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO
NOT REMOVE THE COVER
(OR BACK). NO USER-
SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING
TO QUALIFIED SERVICE
PERSONNEL.
The lightning flash with
arrowhead symbol within
an equilateral triangle is
intended to alert the user to
the presence of uninsulated
“dangerous voltage” within
the product housing that may
be of sufficient magnitude as
to constitute a risk of electric
shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
10 US-EN
Safety
PLEASE FAMILIARIZE YOURSELF WITH ALL
INSTRUCTIONS FOR USE AND SAFETY
NOTICES BEFORE USING THE PRODUCT
FOR THE FIRST TIME. KEEP ALL THE SAFETY
ADVICE AND INSTRUCTIONS IN A SAFE
PLACE FOR FUTURE REFERENCE!
HEED ALL WARNINGS – All warnings
on the appliance and in the operating
instructions should be adhered to.
FOLLOW ALL INSTRUCTIONS – All
operating and usage instructions should be
followed.
DO NOT USE THIS APPARATUS NEAR
WATER – The appliance should not be used
near water or moisture – for example, in a
wet basement or near a swimming pool and
the like.
WARNING! Failure to observe the
following warnings may result in
death or serious injuries.
Follow all instructions – All operating and
usage instructions should be followed.
Do not use this apparatus near water – The
appliance should not be used near water or
moisture – for example, in a wet basement or
near a swimming pool and the like.
Do not defeat the safety purpose of the
polarized or grounding plug. A polarized
plug has two blades with one wider than the
other. A grounding plug has two blades and
a third grounding prong. The wide blade or
the third prong is provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
Refer all servicing to qualified personnel.
Servicing is required when the apparatus has
been damaged in any way, such as when
the power supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the product has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Use of controls or adjustments or performance
of procedures other than those described
herein may result in hazardous radiation
exposure or other unsafe operation.
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
The apparatus must not be exposed to
dripping or splashing and objects filled with
liquids, such as vases, must not be placed on
apparatus.
The apparatus may not be exposed to
dripping or splashing water. No objects filled
with liquids, such as vases, may be placed on
the apparatus.
No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Danger of explosion if battery is incorrectly
replaced. Replace only with the same or
equivalent type.
Before operating this system, check the
voltage of this system to see if it is identical to
the voltage of your local power supply.
DANGER RADIO INTERFACE
Switch the product off on airplanes, in
hospitals, service rooms, or near medical
electronic systems. The wireless signals
transmitted could impact the functionality
of sensitive electronics. Keep the product at
least 7.874 in / 20 cm from pacemakers or
implantable cardioverter defibrillators, as
the electromagnetic radiation may impair
the functionality of pacemakers. The radio
waves transmitted could cause interference in
hearing aids. Do not place the product near
flammable gasses or potentially explosives
areas (e. g. paint shops) with the wireless
components on, as the radio waves emitted
can cause explosions and fire. The range
of the radio waves varies by environmental
conditions.
11 US-EN
In the event of wireless data transmission,
unauthorized third parties receiving the data
cannot be excluded.
Lidl US LLC is not responsible for interference
with radios or televisions due to unauthorized
modification of the product.
Lidl US LLC further assumes no liability for
using or replacing cables and products not
distributed by Lidl US. The user of the product
is fully responsible for correcting interference
caused by such unauthorized modification of
the product, as well as replacement of such
products.
Note: This product has been tested and
complies with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
product generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this product causes
harmful interference to radio or television
reception, which can be determined by
turning the product off and on, the user is
encouraged to try and correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the product
and receiver.
• Connect the equipment to an outlet on a
different circuit than the one the receiver is
connected to.
• Consult the dealer or an experienced
radio / TV technician for help.
This product complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This product may not cause harmful
interference, and
(2) this product must accept any interference
received, including interference that may
cause undesired operation. The RF Exposure
Compliance distance is 0.20 in / 5 mm.
If any solid object or liquid falls into the
system, unplug the system and have it
checked by qualified personnel before
operating it further.
When removing the power plug from the wall
outlet, always pull directly on the plug, never
yank on the cord.
Failure to observe the
following warnings may result in
injuries or property damage.
Use only with the cart, stand, tripod,
bracket or table specified by the
manufacturer, or sold with the
apparatus. When a cart or rack is
used, use caution when moving the
cart / apparatus combination to
avoid injury from tipping over.
To avoid possible hearing damage,
do not listen to music at a high
volume for long periods of time.
NOTICE
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as
radiators, heaters, stoves, or other apparatus
(including amplifiers) that produce heat.
Only use attachments / accessories specified
by the manufacturer.
Unplug the apparatus during lightning storms
or when unused for long periods of time.
This equipment is a Class II or double
insulated electrical appliance. It has been
designed in such a way that it does not
require a safety connection to electrical earth.
Minimum distance around the apparatus for
sufficient ventilation is 2 in / 5 cm.
The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, tablecloths, curtains, etc.
The power plug / appliance coupler is used
as the disconnect device, the disconnect
device must remain readily accessible.
Do not place this product close to strong
magnetic fields.
12 US-EN
Do not place this product on the amplifier or
receiver.
Do not place this product close to damp
areas as the moisture will affect the life of the
laser head.
If any solid object or liquid falls into the
system, unplug the system and have it
checked by qualified personnel before
operating it any further.
Do not attempt to clean the product with
chemical solvents as this may damage the
finish. Use a clean, dry or slightly damp cloth.
Changes or modifications to this product not
expressly approved by the party responsible
for compliance will void the user’s ability to
operate the equipment.
Safety warnings for
batteries
When used correctly, cells and batteries
provide a safe and dependable source of
portable power. However, if they are misused
or abused, this may result in leakage, burns,
fire, or explosion.
Store batteries in a dry place at room
temperature. Batteries are sensitive to high
and low temperatures. Such thermal exposure
may lead to leakage, fire, or explosion.
Keep cells and batteries out of reach of
children, especially small batteries. Ingestion
may lead to choking or acute and serious
personal injury.
Keep cells or batteries clean and dry both
during use and storage. Wipe metal terminals
with a soft, dry cloth if they become dirty.
Immediately seek medical attention if a cell
or battery has been swallowed. Also, contact
your local poison control center.
In the event that the electrolyte comes into
contact with the skin or eyes, immediately
flush with fresh water for at least 15 minutes
and seek medical attention.
Store unused batteries in their original
packaging or in safe place and away from
metal objects that may short-circuit them.
Exercise care in handling batteries in order
to prevent shorting with conducting materials,
such as rings, coins, bracelets, and keys.
The battery or the conductor can overheat
and cause burns, leakage, fire, or explosion.
Clean the battery contacts and also those of
the product prior to battery installation. Keep
the contacts clean.
Remove batteries from the product that will
not be used for an extended period of time
(months or longer).
Remove discharged batteries from product
promptly to avoid possible damage from
leakage.
Choose the proper battery for the intended
application.
Always take care to correctly insert batteries
observing (+) and (–) polarity marks on
the battery and the product for which it is
intended. Proper polarity must be observed to
avoid damage to either product or batteries.
Always replace the whole set of batteries at
one time, taking care not to mix old and new
ones,or batteries of different types, capacities,
or manufacturers.
Never heat batteries in order to revive them.
WARNING! Never charge a battery
unless the battery label specifically states
the battery is rechargeable. Charging a non-
rechargeable battery, may result in leakage,
fire, or explosion.
Use only the power cord supplied with the
product. The use of other cords may result
in the batteries inside the product being
charged.
Do not open or mutilate a battery or cell.
Electrolyte from the cell is corrosive and can
cause damage to the eyes or skin. The cell
contents can also be hazardous if ingested.
Do not drop or subject the cell or battery to
strong mechanical shock.
Batteries should not be disassembled,
crushed, punctured, or otherwise mutilated.
Such abuses may result in leakage, fire, or
explosion.
Do not dispose of the battery in a fire. Failure
to observe this precaution may result in an
explosion.
Dispose of batteries properly and in
accordance with government regulations.
13 US-EN
WARNING
WARNING! Chemical Burn
Hazard.
Keep batteries away from
children.
This product contains lithium
button / coin cell batteries.
If a new or used lithium
button / coin cell battery is
swallowed or enters the body,
it can cause severe internal
burns and can lead to death
in as little as 2 hours. Always
completely secure the battery
compartment. If the battery
compartment does not close
securely, stop using the
product, remove the batteries,
and keep it away from
children. If you think batteries
might have been swallowed or
placed inside any part of the
body, seek immediate medical
attention.
Dispose of button / coin cell
batteries properly. Keep them
away from children. Even used
cells may cause injury.
SAVE THESE
INSTRUCTIONS
14 US-EN
Before use – preparation
Note: Remove all packaging materials from the
product.
CAUTION! Make sure that the product and
the devices to be connected are switched off
before you connect them. Please also read
the user instructions for the devices which you
are connecting.
Prepare the remote control
The provided remote control allows the product to
be operated from a distance.
Even if the remote control is operated within
the effective range (19.7 ft (6 m), remote
control operation may be impossible if there
are any obstacles between the product and
the remote control.
If the remote control is operated near other
products which generate infrared rays, or if
other remote control devices using infra-
red rays are used near the product, it may
operate incorrectly. Conversely, the other
products may operate incorrectly.
First-time use
A
23
23
The remote control has a pre-installed lithium
CR2025 battery. Remove the protective tab to
activate the remote control battery.
Replace the remote control
battery (Fig. A)
Pull out the battery tray 23 and remove the
old battery.
Place a new CR2025 battery into the battery
tray 23 with correct polarity (+ / –) as
indicated.
Insert the battery tray 23 back into the slot.
DANGER OF EXPLOSION! If
the battery is not correctly replaced.
Replace only with the same or an
equivalent type.
WARNING! Ensure the correct polarity of
the battery. The plus symbol on the battery
must be visible (see fig. A).
Placing TV or monitor
Note: Ensure the TV is positioned properly.
Turning the volume up too loud may cause the TV
to vibrate and fall over.
This product is designed for use with TVs and
similar display devices up to a maximum base
stand dimension of 18.9 in / 48 cm (W) x
8.7 in / 22 cm (D) and within a maximum
load of 77 lb (35 kg). The base stand shall
spread the weight across a reasonably wide
area of the product.
The soundbase is NOT suitable for use with
heavy display devices that use narrow legs
instead of a large base stand, as these types
of feet may concentrate excessive force on
the soundbase.
Place the device on a level and stable
surface.
Note: Furniture cleaning products may affect
the soundbase’s rubber stands. Use a mat if
in doubt.
Decide where to place the product.
Always make sure that …
• there is a wall socket nearby;
15 US-EN
• there is enough space above, in case you
want to place a television set on the device;
• a television set and any other devices
(e. g. set-top box, DVD player) can be set
up nearby, in case you do not want / are
unable to place them on the device.
Connect the source device(s). Always ensure
that all devices are securely positioned.
Before use – connections
Use the HDMI ARC connection
HDMI (ARC)
TV
Preparation
Refer to the owner’s manual of your TV set.
An ARC-capable HDMI cable is part of the
delivery scope of this product.
The ARC (Audio Return Channel) function allows
you to send audio from your ARC-compliant TV to
your product through a single HDMI connection.
To enjoy the ARC function, please ensure your TV
is both HDMI-CEC and ARC-compliant and set up
accordingly. When correctly set up, you can use
your TV remote control to adjust the volume output
(VOL + / – and MUTE) of the product.
Ensure to use HDMI cables that can support
the ARC function.
HDMI-CEC will be called different names
by different manufacturers – please refer to
your owner’s manual for details on setting up
HDMI-CEC and ARC.
Connect the HDMI cable from product’s
HDMI (ARC) socket 17 to the HDMI (ARC)
socket on your ARC compliant TV. Then press
the remote control to select HDMI ARC.
16 US-EN
Use the OPTICAL connection
TV
Use an optical cable (not included) to
connect the TV’s optical output socket to the
product’s OPTICAL socket 14 .
COAXIAL socket
TV
You also can use the COAXIAL cable (not
included) to connect the TV’s COAXIAL
OUT socket and COAXIAL socket 13 on the
product.
17 US-EN
Use the AUX sockets
A Use a 3.5 mm jack plug cable (not included)
to connect an external audio device or TV’s
headphone socket to the AUX (1 or 2) input
socket 16 on the product.
B Use a 3.5 mm to RCA audio cable (included)
to connect the TV’s audio output (R / L)
sockets to the AUX (1 or 2) input socket on
the product.
Tip: Set the playback device (e.g. television set)
to a higher volume and the soundbase to a lower
volume. This will avoid automatic switch off of the
soundbase.
Connection to power outlet
RISK OF PRODUCT DAMAGE!
NOTICE
Ensure that the power supply voltage
corresponds to the voltage printed on the
back of the product.
Connect the AC power cord to the power
socket 12 on the product and a wall outlet.
Notes:
Ensure all connections are connected before
connecting to the power outlet.
Be sure to unplug the power cord from the
outlet when the system is not in use for an
extended period of time.
18 US-EN
Using the product
Standby / ON
After connecting the soundbase to a wall
outlet, switch the product on using the I/O
switch 11 . The soundbase is in standby mode
now, as indicated by the red LED indicator.
Press the button 1 / 18 on the main device or
on the remote control to switch the main unit ON.
Press the button 1 / 18 again to switch
the product back to standby mode. The LED
indicator lights up red.
Disconnect the power plug from the wall
outlet or switch the I/O switch 11 on the
rear of the product to switch the product off
completely.
Note:
When turning the product on again, it will
continue in the same mode that was used
prior to turning off the product last time.
If the product is idle for over 15 minutes, the
product will automatically switch to standby
mode.
Select modes
Press the button 2 repeatedly on the product
or press the AUX1, AUX2, BT (Bluetooth®),
OPTICAL, COAXIAL, HDMI ARC, USB buttons on
the remote control to select the desired mode.
Indicator Mode
1Red Standby
2 Orange / flash AUX1 / AUX2
3 Blue BLUETOOTH®
4 Orange / flash OPTICAL /
COAXIAL
5 Orange / flash HDMI ARC / USB
Adjust the volume /
Mute volume
Press the VOL +/– buttons 4 / 20 to adjust
the volume.
While adjusting the volume, the
corresponding operation LED ( 7, 8, 9 or
10 ) flashes quickly.
If you wish to turn the sound off, press the
MUTE button 21 on the remote control. Press
the MUTE button 21 again or press VOL +/–
buttons 4 / 20 to resume normal listening.
While the mute function is active, the
corresponding operation LED ( 7, 8, 9 or
10 ) is flashes once per second.
Once the volume level has reached its
maximum level, if you press the VOL + button
4 / 20 again, the corresponding operation
LED flashes slowly 3 times.
Once the volume level has reached its
minimum level, if you press the VOL – button
4 / 20 again, the corresponding operation
LED flashes slowly 3 times.
Select the equalizer
While playing, press the EQ button 3 / 22
repeatedly on the product or press the FLAT,
TV, CINEMA, SONG buttons on the remote
control to select preset equalizers.
AUX 1 / AUX 2 / HDMI ARC /
OPTICAL / COAXIAL operation
Via the ARC channel of the HDMI cable, digital
audio signals can be transmitted from the source
device (e. g.television set) to the soundbase.
Audio transmission via the HDMI (ARC)
socket 17 can only work if all components are
ARC-enabled.
Set the product to standby mode with the I/O
switch 11 . Press the standby button 1 / 18
to switch on the product.
By pressing the HDMI (ARC) button 19 ,
select the HDMI input.
Switch on the television set. When the
connection is established for the first time, it
may take several seconds until sound is output
from the soundbase
Ensure that the product is connected to the TV
or audio device.
Press the button 2 repeatedly on the
product or press the AUX1, AUX2, HDMI
ARC, OPTICAL, COAXIAL buttons on the
remote control to select the desired mode.
19 US-EN
Operate your audio device directly for
playback features.
Press the VOL +/– button 4 / 20 to adjust
the volume to your desired level.
Tip: While in HDMI ARC / OPTICAL / COAXIAL
mode, if there’s no sound output and the status
indicator is flashing, you may need to activate
PCM output on your source device (e.g. TV, DVD
or Blu-ray player).
Bluetooth operation
Audio files from a portable audio device can
also be played via the Bluetooth® interface of the
product.
Pair Bluetooth®-enabled
devices
Notes:
The operational range between the main unit
and a Bluetooth® device is 32.8 ft / 10 m.
Refer to the Bluetooth® device’s instruction
manual.
Compatibility with all Bluetooth® devices is
not guaranteed.
Any obstacle between this product and a
Bluetooth® device can reduce the operational
range.
Keep this product away from other electronic
devices that may cause interference.
To connect your device to the product
via Bluetooth®, follow the steps below:
1. During ON mode, press the button 2
repeatedly on the product or press the
Bluetooth® button to select Bluetooth® mode.
The blue indicator 8 will flash slowly.
2. If you cannot find the product, press and
hold the / PAIR button on the remote
control for approx. 2 seconds. The system has
entered pairing mode. You will hear a signal
sound from the product and the blue indicator
8 will flash fast.
Activate your Bluetooth® device and select the
search mode. “SBS 60 B2” will appear on
your Bluetooth® device.
3. Select “SBS 60 B2” in the pairing list. After
the system is successfully connected, it says
“Paired” and the blue indicator 8 will light
up solid.
4. Play music from the connected device.
To disconnect the Bluetooth® function,
you can:
Switch to another function on the product.
Disable the function from your Bluetooth®
device. The Bluetooth® device will be
disconnected from the product after it says
“Disconnected”.
Press and hold the / PAIR button on the
remote control.
Tips:
Enter “0000” for the password if necessary.
If there is an existing connection, press and
hold the / PAIR button on the remote
control to re-activate pairing mode, the
existing connection will be interrupted, the
blue indicator 8 will flash.
If no other Bluetooth® device pairs with this
player within two minutes, the player will
recover its previous connection.
The player will also be disconnected when
your device is moved beyond the operational
range approx. 10 meters.
If you want to reconnect your device to this
player, place it within the operational range.
If the device is moved beyond the operational
range, when it is brought back, please check
if the device is still connected to the player.
If the connection is lost, follow the instructions
above to pair your device to the player again.
Listen to music from Bluetooth®
device
If the connected Bluetooth® device supports
Advanced Audio Distribution Profile (A2DP),
you can listen to the music stored on the
device through the player.
If your audio player supports Audio Video
Remote Control Profile (AVRCP), you can
control the basic functions of the audio player
with the soundbase’s remote control.
20 US-EN
1. Pair your device with the player.
2. Play music via your device (if it supports
A2DP).
3. Use supplied remote control to control
play (if it supports AVRCP).
• To pause / resume play, press the
/PAIR button.
• To skip to a track, press the ,
buttons.
Note: Usually, audio devices remember the
identification of the device. In this case, it may not
be necessary to establish the connection manually
again if the Bluetooth® function is activated.
USB operation
Plug the USB device into the USB socket 15 .
Press the button 2 on the product
repeatedly or press the USB button on the
remote control to select USB mode. The
orange light 10 flashes.
This USB port can read MP3 files.
During playback:
• To pause or resume play, press the /
PAIR button on the remote control.
• To skip to the previous / next file, press the
, buttons on the remote control.
• Press and hold the , buttons on the
remote control to perform fast forward /
reverse playback. Release the button to
resume normal playback.
Charging other devices via
USB port
This USB port can charge other devices if
those devices have a charging function.
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this product, check the following points
before requesting service.
= Fault
= Action
No function / no display
Ensure the power cable is connected securely.
Make sure that the product is switched on.
The remote control does not function
Use the remote control near the product.
Point the remote control at the remote control
sensor 5 on the product.
Replace the battery in the remote control with
a new one.
Remove any obstacles between the remote
control and the product.
Loud hum or noise is heard
Check if audio in plugs are well connected
The product does not respond when
pressing any buttons
An electrostatic discharge has occurred,
which blocks the soundbase. Switch off the
soundbase on the main switch 11 for approx.
5 seconds and then switch it on again. You
can use the soundbase as usual now.
No sound output
Make sure that the product is not muted. Press
the MUTE button 21 or the VOL + button
4 / 20 to resume normal listening.
Ensure the audio setting of the input source
(e. g. TV, game console, DVD player, etc.) is
set to PCM mode.
The sound output effect sounds
unfamiliar
Press the EQ button on the product
repeatedly or press the FLAT, TV, CINEMA,
SONG buttons on the remote control to select
preset EQ mode for the optimal sound output
effect.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
