Mocka Fiona Single Bed Assembly Instructions

Mocka
Brand
Mocka
Model
Fiona Single Bed
Type
Assembly Instructions

This manual is also suitable for

mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Fiona Single & King Single Bed
Thank you for purchasing Fiona Single & King Single Bed. Please follow the * IMPORTANT NOTICE *
When moving the bed, please lift o the ground with two people, DO NOT
drag, push or pull the bed across the floor, as this can result in damage to
the supporting leg.
manufacturer’s assembly instructions in detail.
HARDWARE SUPPLIED
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
25mm
bolt x4
H
35mm20mm
bolt x 20 bolt x1
L
left
plate x2
R
right
plate x2
double
cap x12
A B
25mm
bolt x8
C
spring
washer x8
D
washer
x12
E
F
T-2
large allen
key x1
small allen
key x1
T-1
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Fiona Single & King Single Bed
1
12
4
6
11
12
10
9
7
7
3
5
10
2
12
11
12
8
8
8
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Fiona Single & King Single Bed
1 2
Attach 4 x legs (12) to panels as shown. Attach 2 x left plates (L) and 2 x right plates (R) to panels [3], [4], [6] and [5] as
shown in Step 2a and Step 2b and secure with 8 x bolts (F), 8 x bolts (B), 8 x
spring washers (C) and 8 x washers (D).
Step 2c: Attach panel (10) and assembled frame together as shown and secure
with 8 x bolts (F). Tighten with an Allen Key (T-1).
1
12
12
12
12
12
R
L
L
B
DC
L
F
L
Step 2b
Step 2a
R
F
Step 2c
10
6
4
1
3
52
T-1
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Fiona Single & King Single Bed
3 4
Step 3a: Attach Panel (10) to assembled frame as shown and secure with
2 x bolts (E).
Step 3b: Attach Panel (7) to assembled frame as shown and secure with
2 x bolts (F).
Steps 3c and 3d: Attach Panel (8) to assembled frame as shown and secure with
1 x bolt (H) and 1 bolt (E). Tighten with an Allen Key (T-1).
Join the bed planks together in the middle of the frame using 12x
double caps (A). Insert the end of the planks into the bed frame as
shown and attach the double caps (A) into panel [6]. Make sure the
double caps (A) click securely into place.
Step 3a
F
Step 3b
Step 3c
H
7
E
E
Step 3d
1
8
8
10
2
7
7
8
8
9
9
T-1
A
11
11
11
6
mocka.co.nz I mocka.com.au I
ASSEMBLY INSTRUCTIONS
Fiona Single & King Single Bed
5
Once assembled lift furniture into place, do not drag. Ensure unit is
balanced and steady before use. You’re done, enjoy!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Mocka Fiona Single Bed Assembly Instructions

Mocka
Brand
Mocka
Model
Fiona Single Bed
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents