BRP-Rotax
MAINTENANCE MANUAL LINE
GENERAL
In this Manual all ROTAX® 912 i Series engines are described.
NOTE
ROTAX® 912 i Series includes 912 iS, 912 iS Sport and 912 iSc Sport.
Purpose The purpose of this Manual is to provide aircraft manufacturers with technical require-
ments (e.g. interface descriptions and limitations) that must be adhered to when installing
this type of engine into an aircraft or certifying aircraft powered by this engine type. Fur-
thermore it should allow independent ROTAX® Maintenance Technicians (iRMT) to main-
tain this engine in compliance with the relevant maintenance and safety instructions
provided by the engine manufacturer.
For detailed information related to aircraft and aircraft/engine installation, maintenance,
safety or flight operation, consult the documentation provided by the aircraft manufacturer
and/or its dealer.
For additional information on engines, their maintenance or parts, you can also contact
your nearest authorized ROTAX® authorized Aircraft Engine Distributor or their independ-
ent Service Center.
ROTAX®
Distributors
For ROTAX® Authorized Distributors for aircraft engines see latest Operators Manual
(OM) or the official website www.FLYROTAX.com.
Engine serial
number
When making inquiries or ordering parts, always indicate the engine serial number. Due to
continuous product improvement, engines of the same engine type might require different
support and spare parts. The engine serial number is on the top of the crankcase, behind
of the propeller gearbox.
Figure 1.1: Engine serial number
00–00–00
Page 2
May 01/2023
Effectivity: 912 i Series
Edition 2/Rev. 2
