Reebok EDGE series User manual

Dear Customer,

We are pleased, that you have chosen a Reebok Fitness Equipment. This quality product has been

designed for in-home use and has been tested and certified according to the European Norm EN

957-1/5. Please carefully read the instructions prior to assembly and first use and be sure to keep

the instructions for reference and maintenance.

We wish you lots of success and fun while training,

Your Reebok – Team

Warranty

Limited Warranty – UK Only

RFE International Ltd. (RFE), warrants this product to be free from defects in workmanship and

material, under normal use and service conditions, for a period of (2) two years for parts and labour.

This warranty extends only to the original purchaser. RFE’s obligation under this warranty is

limited to replacing or repairing, at RFE’s option, the product through one of its authorized service

centers. All repairs for which warranty claims are made must be pre-authorized by RFE. This

warranty does not extend to any product or damage to the product caused by or attributed to freight

damage, abuse, misuse, improper or abnormal usage or repairs not provided by a RFE authorized

service centre, products used for commercial or rental purposes, or products used as store display

models. No other warranty beyond that specifically set forth above is authorized by RFE.

RFE is not responsible or liable for indirect, special or consequential damages arising out of or in

connection with the use of performance of the product or damages with respect to any economic

loss, loss of property, loss of revenues or profits, loss of enjoyment or use, costs of removal,

installation or other consequential damages of whatsoever nature.

The warranty extended hereunder is in lieu of any and all other warranties and any implied

warranties of merchantability or fitness for a particular purpose is limited in its scope and duration to

the terms set forth herein.

This warranty gives you specific legal rights.

GB

Customer Service

To best possibly support you in the case of problems with your product, we would ask you to please

quote the product Model Name and Serial Number.

These can be found on the sticker underside your product.

Modelname:

Serialnumber:

Waste Disposal

Contact

RFE INTERNATIONAL LTD

THE PERFORMANCE CENTRE

MAIDSTONE RD

KINGSTON

MILTON KEYNES

MK10 0BD

head office tel: 0044 (0) 1908 793020

head office fax: 0044 (0) 1908 793021

e-mail: info@rfeinternational.com

web: www.reebokfitness.co.uk

Technical support:

tel: 0044 (0) 1908 793030

e-mail: techsupport@rfeinternational.com

Advice

The owner’s manual is only for the customer reference. Reebok can not guarantee for mistakes

occurring due to translation or change in technical specification of the product.

Reebok products are recyclable. At the end of its useful life please

dispose of this article correctly and safely (local refuse sites).

GB

Precautions

Before assembling or using the exercise cycle, please read the following instructions

carefully. They contain important information for use and maintenance of the equipment as

well as for your personal safety. Keep these instructions in a safe place for maintenance

purposes or for ordering spare parts.

• Product-Scope: This product is made for home use only and tested up to a maximum

body weight of 120 kilograms.

• Product-Performance: This hometrainer is tested to the European Standard EN 957-1/5

HB and is not suitable for therapeutic training.

• Product-Performance: This home-trainer is speed-dependent, i.e. higher/lower pedal

speed leads to higher/lower performance.

• Product-Feature: The resistance can be changed by the computer.

• Use-Scope: The exerciser may not be used by persons with a weight of over 120 kg.

• Use-Scope: This product is designed for the physical exercise by adults. Please ensure that

children only use it under the supervision of an adult.

• Use-Environment: Ensure that those present are aware of possible hazards, e.g. movable

parts during training.

• Use-Environment: Ensure that sufficient space is available to use the home exerciser.

• Use-Environment: Place the home exerciser on an even, non-slippery surface.

• Use-Environment: Please ensure that liquids or perspiration never enter the machine or

electronics.

• Use-Environment: Keep the equipment indoors, away from moisture and dust. Do not put the

equipment in a garage or covered patio, or near water.Failure to do this can result in damage

to the machine and will invalidate your warranty.

• Use-Environment: The product is made for home use only. Warranty and manufacturer's

liability do not extend to any product or damage to the product caused by commercial

purposes,rental purposes,2

nd hand machines,ex display models or machines purchased via

an unauthorised retailer.

• User-Health: Consult your physician before starting with any exercise programs to receive

advice on the optimal training.

• User-Health: Incorrect/excessive training can cause health injuries.

• User-Health: If you feel sickness, chest pain, fits of dizziness or breathlessness during your

training, immediately stop the training and consult your physician.

• Product-Preparation: Ensure that training only starts after correct assembly, adjustment and

inspection of the home exerciser.

• Product-Preparation: Follow the steps of the assembly instruction carefully.

• Product-Preparation:Only use suitable tools for assembly and ask for assistance if necessary.

• Product-Preparation: Only use original Reebok parts as delivered (see checklist).

• Use-Preparation: Tighten all adjustable parts to prevent sudden movement while training.

GB

• Use-Instruction: Please follow the advice to correct training as detailed in the training

instructions.

• Use-Instruction: Do not use the home exerciser without shoes or loose shoes.

• Use-Safety: Be aware of non-fixed or moving parts whilst mounting or dismounting the home

exerciser.

• Appropriate clothing must be worn at all times during exercise.

• Use-Safety: Use the height adjustment caps on the rear tube to ensure stable position of the

home exerciser.

• Use-Safety: Make sure the front wheels are placed in the correct position: see assembly

instruction.

• Product-Power-Safety: The unit requires a power supply of 220V – 230V / 50Hz. It should be

connected to a safety socket with a single 10A fuse. Before commissioning the appliance pay

attention to the fact that the correct plug-in power supply unit (observe marking) has been

connected properly.

• Product-Maintenance: If the equipment is in regular use, check all its components thoroughly

every 1 – 2 month. Pay particular attention to the tightness of bolts and nuts. This applies

especially to the securing bolts for saddle and handlebars.

• Product-Maintenance: Incorrect repairs and structural modifications (e.g. removal or

replacement of original parts) may endanger the safety of the user.

• Product-Maintenance: Damaged components may endanger your safety or reduce the

lifetime of the equipment. For this reason, worn or damaged parts should be replaced

immediately and the equipment taken out of use until this has been done.

• Product-Maintenance: Only use original Reebok spare parts.

• Product-Maintenance: Do not under any circumstances carry out electrical repairs or

alterations yourself. Always ensure that such work is done by a properly qualified electrician.

• Product-Maintenance: Disconnect the apparatus from the mains before doing repair,

maintenance or cleaning work.

GB

Check List

6 x

8mm

537

D

1 x

104

105

1 x

317

201

101

307

306

415

410

316

312

1x

210

110

301

B

M4x15mmM8x65mm

1 x

4 x 4 x

1 x

5 mm

405

1 x

215

M8x20mm

6 x 8 x

8mm

302

214

8mm

2 x

A

1 x

C

1 x

Assembly instruction

1.

2.

PUSH

3.

4.

215-2x

537-2x

214-2x

215-2x

537-2x

302-2x

2

1

3

110-1x

215-2x

537-2x

302-2x

1

0

-

1

x

5.

6.

110-2x

3

2

1

2

1

Power

Transport

Correct Use

GB

Proper Ergonomic Positioning: Please refer to the

diagram to the left as indication of the proper training

position. To obtain this, please adjust the handlebar and

saddle position to your body height.

Mounting: When getting on/off the equipment be sure to

place your weight only on the pedals when in the

lower-most position.

Major exercise type: This equipment focuses on your

lower body, and can tone your thigh and shank muscles.

Warning: Incorrect and/or excessive training can cause

risk of injury.

.

Exploded view

215

302

312

503

506

503

502

504

507

505

501

316

537

3

0

2

3

0

2

3

0

5

3

0

1

3

0

3

0

6

3

0

5

3

0

7

3

0

5

3

0

8

3

0

8

3

0

9

3

0

2

3

0

5

1

0

1

0

3

0

1

0

1

0

524

520

522

519

510

525

319

330

317

302

214

215

302

215

415

414

411

412

407

110

405

409

404

403

412

411

413

410

313

110

323

108

106

210

209

213

110

104

105

110

103

109

409

111

110

102

110

112

101

202

205

212

203

206

204

201

202

315

213

311

314

601

602

603

605

607

535

606

527

302

537

511

510

525

509

513

514

302

537

515

508

604

521

515

517

526

525

516

528

508

528

537

Spare Part List

Part No. Part name

Quantity

101 Overlay 1

102 Console housing-Upper 1

103 Battery Cover 1

104 Handle Bar Cover-Rear 1

105 Handle Bar Cover-Front 1

106 Hand Pulse sensor Wire 2

108 Speed Sensor Wire- upper 1

109 Console housing –lower 1

110 M4X15 Screw 20

111 PC Board 1

112 Console –upper 1

201 Handle Bar Tube 1

202 Hand Pulse Sensor-Upper 2

203 Hand Pulse Sensor Cover-lower 2

204 Handle Bar Foam Grip 2

205 Hand pulse sensor Wire –lower 2

206 Handle Bar end cap 2

209 Speed sensor Wire 1

210 Upright Tube 1

212 M3X12 Screw 4

213 M5X14 Screw 6

214 Ø8 curve Washer 2

215 M8X20screw 6

301 M8X65 screw 4

302 Ø8 washer 12

303 Rear Stabilizer Adjustment Foot 2

305 Stabilizer tube end cap 4

306 Stabilizer tube -Rear 1

307 Stabilizer tube –Front 1

308 Front Stabilizer foot 2

309 Transportation Wheel set 2

311 Speed sensor 1

312 Seat post 1

313 Seat post insert 1

314 Seat Post height Adjustment Knob 1

315 Speed sensor Wire-Lower 1

316 Saddle 1

317 Main Frame 1

318 M5X14 Screw 1

319 Upright lower section insert 1

323 Saddle post bottom holder 1

330 M8 nut 1

403 Main Chain Cover- Left 1

404 Seat Post Plastic Holder 1

405 Chain Cover-Front 1

407 Main Chain Cover -right 1

409 Plastic Insert 9

410 Pedal-Left 1

411 Crank cap 2

412 M10X1.25 Nut 2

413 Crank-Left 1

414 Crank-Right 1

415 Pedal-Right 1

501 6004 Bearing 2

502 M20 Nut 2

503 Ø22 Washer 1

504 Driving Belt pulley 1

505 Driving Belt 1

506 Crank Shaft 1

507 M8X8 Screw 4

508 M6X6 Screw 4

509 Flywheel Ring-Shaped Holder 1

510 6300 Bearing 3

511 M10X17X4 Nut 1

513 Flywheel 1

514 Aluminium Disk 1

515 M8X15 Screw 8

516 Flywheel Driving Belt pulley 1

517 6000 Bearing 1

519 Tension Pulley Bracket 1

520 Tension pully bracket clip 1

521 Flywheel axle 1

522 Tension Pulley Spring 1

524 Tension Pulley Fix Screw 1

525 M10 Nut 3

526 Flywheel D-Shaped Holder 1

527 One way bearing 1

528 6003Z Bearing 2

535 M6 Nut 1

537 Ø8 Spring-Washer 10

601 Ø10 washer 2

602 D0.8 X 20 Spring 1

603 Magnet bracket 1

604 M10X73 Magnet bracket axle 1

605 M6X40 bolt 1

606 Motor 1

607 Ø6 washer 1

COMPUTER INSTRUCTION

Functions and Features:

1. Start: Allows you to start the computer just press the START key without selecting a

program. TIME automatically begins to count up from zero. Use the UP and DOWN

keys to adjust the resistance.

2. SCAN: During the exercise stage, the computer will automatically scan the function of

SPEED, TIME, DISTANCE, RPM, CALORIES and PUSLE per each for 6 seconds

unless press the ENTER key to exit the auto-scan function. When the computer exits

the manual-scan then the message window will show “SCAN” for 2 seconds then

switch to auto-scan function.

3. TIME: Shows your elapsed workout time in minutes and seconds. Your computer will

automatically count up from 0:00 to 99:59 in one second intervals. You many also

program your computer to count down from a set up value by using the UP and

DOWN keys from 5:00 to 99:00. If you continue exercising once the time has reached

0:00, the computer will begin beeping. You can press any key to stop the beep sound.

If you re-start the computer at once then the TIME will count up from your setting value

to keep counting.

4. SPEED: Displays your workout speed value in KM or MILE per hour.

5. DISTANCE: Displays the accumulative distance traveled during each workout up to a

maximum of 999.0KM/MILE.

6. RPM: Your pedal cadence.

7. CALORIES: Your computer will estimate the cumulative calories burned at any given

time during your workout.

8. PULSE: Your computer displays your pulse rate in beats per minute during your

workout.

9. PULSE RECOVERY: During the START stage, leave your hands holding on grips or

leave the chest transmitter attached and then press “PULSE RECOVERY” key. Time

starts counting from 01:00 - 00:59 - - to 00:00. As soon as 00:00 is reached, the

computer will show your heart rate recovery status with the grade F1.0 to F6.0 and

message window will show your workout situation. The details as follows,

1.0 means OUSTANDING

1.0＜

＜＜

＜F＜

＜＜

＜2.0 means EXCELLENT

2.0≦

≦≦

≦F≦

≦≦

≦2.9 means GOOD

3.0≦

≦≦

≦F≦

≦≦

≦3.9 means FAIR

4.0≦

≦≦

≦F≦

≦≦

≦5.9 means BELOW AVERAGE

6.0 means POOR

Note: If no pulse signal input then the computer will show “P” on the message window.

If the computer show “Err” on the message window, please re-press the PULSE

RECOVERY key and please make sure your hands are keeping well on the grips or

the chest transmitter is attached well.

10. TEMPERATURE: Display the current temperature.

Key function:

There are 6 button keys and the function description as follows:

1. START/STOP key: a. During the exercise mode, press the key to STOP exercise.

b. During the stop mode, press the key to START exercise.

c. Press this key can allow you to quickly start the computer

without selecting a program. For Manual workout only. Time

automatically begins to count up from zero

2. UP key: a. Press the key to increase the resistance during exercise mode.

b. During the setting mode, press the key to increase the value of Time,

Distance and Calories.

3. DOWN key: a. Press the key to decrease the resistance during exercise mode.

b. During the setting mode, press the key to decrease the value of Time,

Distance, and Calories.

4. ENTER key: a. During the setting mode, press the key to accept the current data

entry.

b. At the stop mode, by holding this key for over two seconds the

computer will re-power on and all the value will reset to zero.

c. During the START stage, press the key can exit the auto-scan

mode to manual-scan mode. .

5. PULSE RECOVERY key: Press the key to activate heart rate recovery function.

6. PROGRAM key: Press the key to select the program from P1 to P6.

Program Introduction & Operation:

Manual Program: Manual

P1 is a manual program. User can start exercise by pressing START/STOP key. The

default resistance level is 3. Users may exercise in any desirous of resistance level

(Adjusting by UP/DOWN keys during the workout) with a period of time or a number

of calories or a certain distance.

Operations: 1. Press the ENTER key to enter MANUAL (P1) program.

2. The TIME will flash and you can press UP or DOWN key to setting

your exercise TIME. Press ENTER key to confirm your desired

workout TIME.

3 The DISTANCE will flash and you can press UP or DOWN keys to

setting your target DISTANCE. Press ENTER key to confirm your

desired workout DISTANCE.

4 The CAL will flash and you can press UP or DOWN keys to setting

your exercise CALORIES. Press ENTER key to confirm your

desired workout CALORIES.

5 Press START/STOP key to begin exercise.

100 20 4030 50 60

10

0

20 4030 50 60

100 20 4030 50 60

Preset Program: Rolling, Valley, Fat Burn, Ramp, and Mountain Program

PROGRAM 2 to PROGRAM 6 is the preset programs. Users can exercise with different

level of loading in different intervals as the profiles show. Users may exercise in any

desirous of resistance level (Adjusting by UP/DOWN key during the workout) with a period

of time or a number of calories or a certain distance.

P2 display:

P3 display:

P4 display:

P5 display:

P6 display:

Operations: 1. Use PROGRAM key to select one of the above programs from P2 to P6.

2. Press ENTER key to enter your workout program.

3. The TIME will flash and you can press UP or DOWN key to setting

10

0

20 4030 50 60

10

0

20 4030 50 60

10

0

20 4030 50 60

10

0

20 4030 50 60 10

0

20 4030 50 60

100 20 4030 50 60

10

0

20 4030 50 60 100 20 4030 50 60 100 20 4030 50 60

100 20 4030 50 60

10

0

20 4030 50 60 100 20 4030 50 60

10

0

20 4030 50 60

10

0

20 4030 50 60

10

0

20 4030 50 60

your exercise TIME. Press ENTER key to confirm your desired

workout TIME.

4. The DISTANCE will flash and you can press UP or DOWN keys to

setting your target DISTANCE. Press ENTER key to confirm your

desired workout DISTANCE.

5. The CAL will flash and you can press UP or DOWN keys to setting

your exercise CALORIES. Press ENTER key to confirm your

desired workout CALORIES.

6. Press START/STOP key to begin exercise.

Operation Instruction:

1. Plug in the power

Plug in the adaptor to the equipment or input the batteries in the back of bottom case

then the computer will produce a beep sound and then turn on the computer at the

Manual mode.

2. Program select and setting value

Ａ. Use the PROGRAM key to select program mode and then press ENTER to

confirm your exercise mode.

Ｂ. At the Manual mode, the computer will use the UP or DOWN key to set up your

workout TIME, DISTANCE and CALORIES. Press UP + DOWN keys can clear

out the setting value to zero.

C. Press the START/STOP key to begin exercise.

D. When you reach the target, the computer will produce beep sounds and then stop.

E. If you set up more than one target and you would like to reach next target, press

START/STOP key to keep on exercise.

Operation guide:

The computer will enter CLOCK setting mode when power on it. You should set up the

current time by the UP or DOWN keys to adjust the Hours and minutes.

Clock Mode:

a. The computer will enter the clock mode when there is no signal input or no keys be

pressed after 4 minutes. You can press ENTER key to switch the clock and

temperature at the clock mode or press other keys to quit the clock mode.

b. You can set up the CLOCK by holding ENTER key for over 2 seconds then adjust by

UP or DOWN keys.

c. By holding the ENTER and UP keys together for over two seconds, you can check the

current clock at “NO SPEED” mode.

Error Message:

E1 (ERROR 1): Normal state: During workout, when the monitor did not get the count

signal from the gear motor more than 4 seconds and check

under successive 3 times then the LCD will show E1.

Power on state: The gear motor will return to zero automatically, when the

signal of motor cannot be detected for more than 4

Page is loading ...

Reebok EDGE series, edge series 2010 User manual

Related papers

Other documents