![](//vs1.manuzoid.com/store/data-gzf/0d978a6b09727064a946ab0905368c43/2/001242425.htmlex.zip/bg4.jpg)
1 APPLICATION
0-5598
- 4 -
© ESAB AB 2020
1 APPLICATION
This filter, when used with the Savage A40 PAPR system as part of an approved system,
conforms to the requirements of Title42, Code of Federal Regulations, Part 84(42CFR84).
The complete equipment can be used in an environment that requires a breathing protection
device. The complete equipment protects against particulate contamination.
The operating temperature range of the filter is -5to+55℃.
It should be used together with:
Part number Denomination
0700 002 404 Pre-filter
0700 002 405 Spark arrestor
See figure 1 in the following chapter.
1.1 ASSEMBLY
1. Filter cover 4. Filter
2. Spark arrestor 5. Turbo unit
3. Pre-filter
Clean or replace the spark arrestor if necessary.
• Insert the spark arrestor (2) in the filter
cover (1)
• Place the pre-filter (3) on top of spark
arrestor (2).