Steelcase Details Airtouch Installation guide

Steelcase
Brand
Steelcase
Model
Details Airtouch
Type
Installation guide

This manual is also suitable for

Installation Instructions
Customer Service Kits for Airtouch
®
Installation Instructions
www.details-worktools.com
939500240 Rev C
Page 1 of 3
Customer Service Kits for Airtouch
®
Customer Service Kits
for Airtouch
®
1
CABLE
OUTER
HANDLE
HOUSING
Replacing a Handle Assembly
1
Slide the cable through the
hole in the outer handle housing.
©2009 Office Details Inc. All rights reserved. Printed in U.S.A. 8/09
P.O. Box 1967 / CD-5E / Grand Rapids, MI 49501-1967 / www.details-worktools.com
Slide the cylindrical tip of the cable through
the hole in the handle (2a) and twist the handle
into the correct position (2b).
Place the handle, with cable attached, into
the outer handle housing as shown.
Secure the cable to the outer handle housing
by pushing the cable to the left (4a) until the
cable snaps securely into place (4b).
Reinstall the handle assembly into its original
location.
2
4
5
3
www.details-worktools.com
CYLINDRICAL
TIP OF THE CABLE
2a
3
4a
4b
2b
Installation Instructions
939500240 Rev C
Page 2 of 3
Customer Service Kits for Airtouch
®
Customer Service Kits
for Airtouch
®
Replacing a Faceplate
1
2
www.details-worktools.com
1
2a
2b
2c
SNAP!
HOOK
Remove existing faceplate.
Slide the right side of the faceplate (hook side)
into the octagonal opening (2a). Swing
faceplate to the left and into octagonal opening
(2b) until you hear an audible 'snap' (2c).
FACEPLATE
OCTANGONAL
OPENING
Customer Service Kits
for Airtouch
®
Installation Instructions
939500240 Rev C
Page 3 of 3
Customer Service Kits for Airtouch
®
  • Page 1 1
  • Page 2 2
  • Page 3 3

Steelcase Details Airtouch Installation guide

Steelcase
Brand
Steelcase
Model
Details Airtouch
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents