Biostar NF61S MICRO AM2 SE User manual

NF61V Micro AM2 SE/NF61S Micro AM2 SE

Setup Manual

FCC Information and Copyright

This equipment has been tested and found to comply with the limits of a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable pro tec tion against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not ins talled and used in accordance with the instructions, may

cause harmful interference to radio communications. There is no guarantee

that interference wil l not occur in a particula r ins talla tion.

The ve ndo r makes no represe nta tio ns or wa rranties with respec t to the

contents here and specially disclaims any implied warranties of merchantability

o r fi tn es s fo r a ny p u rp os e . F urt he r t he ve nd o r res e rves t he ri g ht to r ev is e t h is

publication and to make changes to the contents here without obligation to

notify any party beforehand.

D uplica tion of this publicatio n, in pa rt or in whole , is not al lowed wit hout fi rst

obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and

we will not be res ponsible for any mis takes found in this user’s manual. All the

brand and product names are trademarks of their respective companies.

Table of Contents

Chapter 1: Introduction .............................................1

1.1 Before You Start................................................................... 1

1.2 Package Checklist................................................................1

1.3 Motherboard Features.......................................................... 2

1.4 Rear Panel Connectors (Ver 6.x)............................................ 4

1.5 Rear Panel Connectors (Ver 5.x)............................................ 4

1.6 Motherboard Layout (Ver 6.x)............................................... 5

1.7 Motherboard Layout (Ver 5.x)............................................... 6

Chapter 2: Hardware Installation ..............................7

2.1 Installing Central Processing Unit (CPU)................................ 7

2.2 FAN Headers........................................................................ 9

2.3 Installing System Memory.....................................................10

2.4 Connectors and Slots............................................................12

Chapter 3: Headers & Jumpers Setup......................14

3.1 How to Setup Jumpers..........................................................14

3.2 Detail Settings.....................................................................14

Chapter 4: RAID Functions.......................................22

4.1 Operation System................................................................22

4.2 Raid Arrays.........................................................................22

4.3 How RAID Works.................................................................22

Chapter 5: Useful Help ..............................................24

5.1 Driver Installation Note .......................................................24

5.2 Award BIOS Beep Code........................................................25

5.3 Extra Information................................................................25

5.4 Troubleshooting...................................................................27

Chapter 6: WarpSpeeder™ .......................................28

6.1 Introduction........................................................................28

6.2 System Requirement............................................................28

6.3 Installation.........................................................................29

6.4 WarpSpeeder™....................................................................30

Appendencies: SPEC In Other Language ................36

German................................................................................................36

France..................................................................................................38

Italian..................................................................................................40

Spanish................................................................................................42

Portuguese...........................................................................................44

Polish...................................................................................................46

Russian................................................................................................48

Arabic..................................................................................................50

Japanese..............................................................................................52

NF61V Micro AM2 SE/NF61S Micro AM2 SE

1

CHAPTER 1: INTRODUCTION

1.1 BEFORE YOU START

Tha nk yo u fo r choo sing our pro duct. Be fore yo u s ta rt installing the

mo the rboa rd , plea se make sure you fo llo w the ins tru ctio ns be low:

 Prepare a dry and stable working environment with

s uf ficie nt ligh ting .

 Always disconnect the computer from power outlet

be fo re ope ra tion .

 Befo re you take the mo the rboa rd ou t f rom a n ti -s ta ti c

bag, ground yourself properly by touching any safely

grounde d appliance, o r use gro unded wrist strap to

remove the static charge.

 Avo id tou ch ing the compone nts o n m o the rboa rd o r the

rear side of the boa rd unles s ne cessa ry. Hold the bo a rd

on the edge , do not try to be nd or flex the boa rd.

 Do no t lea ve any unfastene d sma ll pa rts inside the

case after installation. Loose parts will cause short

circuits which ma y damage the equipment.

 Keep the computer from dangerous area, such as heat

so urce , humid a ir and wa te r.

1.2 PACKAGE CHECKLIST

FDD Cable X 1

HDD Cable X 1

Use r’s Manua l X 1

Fully Setup Driver CD X 1

Rear I/O Panel for ATX Case X 1

Se ria l ATA Cab le X 1 ( op tiona l)

USB 2.0 Cable X1 (optional)

S/PDIF Cable X 1 (optional)

Se ria l ATA Po we r Switch Cab le X 1 (op tiona l)

Printe r Po rt Cable X 1 (optional)

Motherboard Manual

2

1.3 MOTHERBOARD FEATURES

NF61V Micro AM2 SE NF61S Micro AM2 SE

CPU

Socket AM2

AMD Sempron / Athlon 64 / Athlon 64 FX /

Althlon 64 X2 processors

Supports Hyper Transport and Cool=n=Quiet

Socket AM2

AMD Sempron / Athlon 64 / Athlon 64 FX /

Althlon 64 X2 processors

Supports Hyper Transport and Cool=n=Quiet

FSB Supports up to 1GHz Bandwidth Supports up to 1GHz Bandwidth

Chips et MCP61V ( GeForce 61 00- 40 0) MCP61S ( GeForc e 61 00- 40 5)

Super I/O

ITE 8716F

Provides the most commonl

y

us e d l e

g

ac

y

Su

p

e

r

I/O functionality.

Low Pin Count Interface

ITE 8716F

Provides the most commonly used legacy Super

I/O functionality.

Low Pin Count Interface

Main

Memory

DIMM Slots x 2

Eac h DIMM s upports 256/512MB & 1GB DDR2

Max Memory Capicity 2GB

Dual Channel Mode DDR2 memory module

Supports DDR2 400 / 533 / 667 / 800

DIMM Slots x 2

Eac h DIMM s upports 256/512MB & 1GB DDR2

Max Memory Capicity 2GB

Dual Channel Mode DDR2 memory module

Supports DDR2 400 / 533 / 667 / 800

Graphics

Integrated in MCP61V Chipset

Max Shared Video Memory is 256MB

Integrated in MCP61S Chipset

Max Shared Video Memory is 256MB

IDE

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Mas ter Mode

supports PIO Mode 0~4

Integrated IDE Controller

Ultra DMA 33 / 66 / 100 / 133 Bus Mas ter Mode

supports PIO Mode 0~4

SA TA II

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant.

Integrated Serial ATA Controller

Data transfer rates up to 3.0 Gb/s.

SATA Version 2.0 specification compliant.

LAN

Realtek 8201CL PHY

10 / 100 Mb/s Auto-Negotiation

Realtek 8201CL PHY

10 / 100 Mb/s Auto-Negotiation

Sound

ALC861VD(Ver 6.x) / ALC888(Ver 5.x)

5. 1 channels audio out (Ver 6. x)

7. 1 channels audio out (Ver 5. x)

Intel High-Definition Audio support

ALC861VD(Ver 6.x) / ALC888(Ver 5.x)

5. 1 channels audio out (Ver 6. x)

7. 1 channels audio out (Ver 5. x)

Intel High-Definition Audio support

PCI slot x2 PCI slot x2

PCI Express x16 slot (x1 Speed) x1 PCI Express x 16 slot (x8 Speed) x1

Slots

PCI Express x 1 slot x1 PCI Express x 1 slot x1

NF61V Micro AM2 SE/NF61S Micro AM2 SE

3

NF61V Micro AM2 SE NF61S Micro AM2 SE

Floppy c onnector x1 Floppy c onnector x1

IDE Connector x1 IDE Connector x1

SA TA 2 C onnect or x2 SATA 2 C onnect or x2

Front Panel Connector x1 Front Panel Connector x1

Front Audio Connector x1 Front Audio Connector x1

CD-i n Connec tor x1 CD-in Connec tor x1

S/PDIF out connector x1 S/PDIF out connector x1

S/PDIF in connector(O ptional) x1 S/PDIF in c onnector(O ptional) x1

CPU Fan header x1 CPU Fan header x1

Sys tem Fan header x1 S ys tem Fan header x1

CMOS clear header x1 CMOS clear header x1

USB connector x2 USB connector x2

Printer Port Connector x1 Printer Port Connector x1

Chassis open header(O ptional ) x1 Chassis open header(O ptional ) x1

Power Connector (24pin) x1 Power Connector (24pin) x1

On Board

Connector

Power Connector (4pin) x1 Power Connector (4pin) x1

Back Panel

I/O

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l Po rt x 1

VGA port x1

LAN port x1

USB Port x4

Audio Jack (Ver 6.x) x3

Audio Jack (Ver 5.x) x6

PS/2 Keyboard x1

PS/2 Mouse x1

S e ri a l Po rt x 1

VGA port x1

LAN port x1

USB Port x4

Audio Jack (Ver 6.x) x3

Audio Jack (Ver 5.x) x6

Board S iz e 207 x 244 (mm) Mic ro A TX Siz e B oard 207 x 244 (mm) Mic ro A TX Siz e B oard

Special

Features

NVIDIA nTunes

RAID 0 / 1 s upport

NVIDIA nTunes

RAID 0 / 1 s upport

OS Support

Windows 2000 / XP / VIS TA

Biostar Reserves the right to add or remove

support for any OS With or without notice.

Windows 2000 / XP / VIS TA

Biostar Reserves the right to add or remove

support for any OS With or without notice.

Motherboard Manual

4

1.4 REAR PANEL CONNECTORS (VER 6.X)

PS/2

Mouse

PS/2

Keyboard

USBX2USBX2

LAN

COM1 VGA

Line In/

Surround

Line Out

Mic In 1/

Bass/ Center

1.5 REAR PANEL CONNECTORS (VER 5.X)

PS/2

Mouse

PS/2

Keyboard

USBX2USBX2

LAN

COM1 VGA

Line In

Line Out

Mic In

Center

Rear

Side

NF61V Micro AM2 SE/NF61S Micro AM2 SE

5

1.6 MOTHERBOARD LAYOUT (VER 6.X)

JKBMS1

JCOM1

JVGA1

JUSB1

JUSBLAN1

JAUDIO1

LAN

Code c

JC DIN 1 J SPDI F_OU T1 JPRNT1

FDD1

Super I/O

BI OS

JPANEL1

JSFAN 1

JUSB3

JUSB2

JCMOS1

J USB V2

SATA 2 SATA 1

IDE1

DI MM A 1

DI MM B 1

JDDRII_22V1

Socket A M2

JATXPWR2

JUSBV1

JATXPWR1

JNFAN1(Optional)

PEX1_1

PCI1

PCI2

BAT1

JAUDIOF1

JCI1(Optional)

JCFAN1

PEX16_1

MCP61V

or

MCP61S

JSPDIF_IN1(Optional)

No te: represents the 1■

st

pin.

Motherboard Manual

6

1.7 MOTHERBOARD LAYOUT (VER 5.X)

JKBMS1

JCOM1

JVGA1

JUSB1

JUSBLAN1

JAUDIO1

LAN

Code c

JC DIN 1 J SPDI F_OU T1 JPRNT1

FDD1

Super I/O

BI OS

JPANEL1

JSFAN 1

JUSB3

JUSB2

JCMOS1

J USB V2

SATA 2 SATA 1

IDE1

DI MM A 1

DI MM B 1

JDDRII_22V1

Socket A M2

JATXPWR2

JUSBV1

JATXPWR1

JNFAN1(Optional)

PEX1_1

PCI1

PCI2

BAT1

JAUDIOF1

JCI1(Optional)

JCFAN1

PEX16_1

MCP61V

or

MCP61S

JSPDIF_IN1(Optional)

No te: represents the 1■

st

pin.

NF61V Micro AM2 SE/NF61S Micro AM2 SE

7

CHAPTER 2: HARDWARE INSTALLATION

2.1 INSTALLING CENTRAL PROCESSING UNIT (CPU)

Step 1: Remove the socket protection cap.

Step 2: Pull the lever toward direction A from the socket and then raise the

lever up to a 90-degree angle.

Step 3: Look for the white triangle on socket, and the gold triangle on

CPU should point towards this white triangle. The CPU will fit only

in the correct orientation.

Motherboard Manual

8

Step 4: Hold the CPU down firmly, and then close the lever toward direct

B to complete the installation.

Step 5: Put the CPU Fan on the CPU and buckle it. Connect the CPU

FAN power cable to the JCFAN1. This completes the installation.

NF61V Micro AM2 SE/NF61S Micro AM2 SE

9

2.2 FAN HEADERS

These fan headers support cooling-fans built in the computer. The fan

cable and connector may be different according to the fan manufacturer.

Connect the fan cable to the connector while matching the black wire to

pin#1.

JCFAN1: CPU Fan Header

Assignment

1 Ground

2 +12V

3

FAN RPM rate

sense

14

JCFAN1

4 Smart Fan

Control (By Fan)

JSFAN1: System Fan Header

JNFAN1: North Bridge Fan Header (Optional)

Pin Assignment

1 Ground

2 +12V

13

1

3

JNFAN1

(Optional)

JSFAN1

3

FAN RPM rate

sense

Note:

The JCFAN1、JSFAN1 and JNFAN1 support 4-pi n and 3-pin head connector. When

connecting with wires onto connectors, please note that the red wire is the positi ve and

shoul d be connected to pi n#2, and the bl ack wire is Ground and should be connected to

GND.

Motherboard Manual

10

2.3 INSTALLING SYSTEM MEMORY

A. Memory Modules

DIMMA

1

DIM MB

1

1. Unlock a DIMM slot by pressing the retaining clips outward. Align a

DIMM on the slot such that the notch on the DIMM matches the

break on the Slot.

2. Insert the DIMM vertically and firmly into the slot until the retaining

chip snap back in place and the DIMM is properly seated.

NF61V Micro AM2 SE/NF61S Micro AM2 SE

11

B. Memory Capacity

DIMM Socket

Location

DDR Module Total Memory Size

DIMMA1 256MB/512MB/1024MB *1

DIMMB1 256MB/512MB/1024MB *1

Max memory 2GB.

C. Dual Channel Memory installation

To trigger the Dual Channel function of the motherboard, the memory module

must meet the following requirements:

Install memory module of the same density in pair, shown in the following table.

Dual Channel Status

DIMMA1

DIMMB1

Disabled O X

Disabled X O

Enabled O O

(O means memory installed, X means memory not installed.)

The DRAM bus width of the memory module must be the same (x8 or

x16)

Motherboard Manual

12

2.4 CONNECTORS AND SLOTS

FDD1: Floppy Disk Connector

The motherboard provides a standard floppy disk connector that supports 360K,

720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the

provided floppy drive ribbon cables.

133

2

34

IDE1: Hard Disk Connector

The motherboard has a 32-bit Enhanced IDE Controller that provides PIO Mode

0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality.

The IDE connector can connect a master and a slave drive, so you can connect

up to two hard disk drives.

1

39

2

40

NF61V Micro AM2 SE/NF61S Micro AM2 SE

13

PEX1_1: PCI-Express x1 Slot

- PCI-Express 1.0a compliant.

- Data transfer bandwidth up to 250MB/s per direction; 500MB/s in total.

- PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.

- 2X bandwidth over the traditional PCI architecture.

PEX16_1: PCI-Express x16 Slot (x1 Speed)

(for NF61V Micro AM2 SE)

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 250MB/s simultaneously per

direction, for an aggregate of 500MB/s totally.

PEX16_1: PCI-Express x16 Slot (x8 Speed)

(for NF61S Micro AM2 SE)

- PCI-Express 1.0a compliant.

- Maximum theoretical realized bandwidth of 2GB/s simultaneously per

direction, for an aggregate of 4GB/s totally.

PEX1_1

PEX16_1

PCI1~PCI2: Peripheral Component Interconnect Slots

This motherboard is equipped with 2 standard PCI slots. PCI stands for

Peripheral Component Interconnect, and it is a bus standard for expansion

cards. This PCI slot is designated as 32 bits.

PCI1

PCI2

Motherboard Manual

14

CHAPTER 3: HEADERS & JUMPERS SETUP

3.1 HOW TO SET UP JUMPERS

The illustration shows how to set up jumpers. When the jumper cap is

placed on pins, the jumper is “close”, if not, that means the jumper is

“open”.

Pin opened Pin closed Pin1-2 closed

3.2 DETAIL SET T ING S

JPANEL1: Front Panel Header

This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, Sleep

button and speaker connection. It allows user to connect the PC case’s front

panel switch functions.

S

L

P

W

R

_

L

E

D

O

n

/

O

f

R

S

T

H

L

E

D

S

P

K

+

-

1

9

16

8

Pin Assignment Function Pin Assignment Function

1 +5V 9 Sleep control

2 N/A 10 Ground

Sleep button

3 N/A 11 N/A N/A

4 Speaker

Speaker

Connector

12 Power LED (+)

5 HDD LED (+) 13 Power LED (+)

6 HDD LED (-)

Hard drive

LED

14 Power LED (-)

Power LED

7 Ground 15 Power button

8 Reset control

Reset button

16 Ground

Power-on button

NF61V Micro AM2 SE/NF61S Micro AM2 SE

15

JATXPWR1: ATX Power Source Conne ctor

This connector allows user to connect 24-pin power connector on the ATX

power supply.

1

12

13

24

Pin Assignment Pin Assignment

13 +3.3V 1 +3.3V

14 -12V 2 +3.3V

15 Ground 3 Ground

16 PS_ON 4 +5V

17 Ground 5 Ground

18 Ground 6 +5V

19 Ground 7 Ground

20 NC 8 PW_OK

21 +5V 9 Standby Voltage+5V

22 +5V 10 +12V

23 +5V 11 +12V

24 Ground 12 +3.3V

JATXPWR2: ATX Power Source Connector

By connecting this connector, it will provide +12V to CPU power circuit.

Assignment

1 +12V

2 +12V

3 Ground

12

34

4

Ground

Motherboard Manual

16

JUSB2/JUSB3: Headers for USB 2.0 Ports at Front Panel

This header allows user to connect additional USB cable on the PC front panel,

and also can be connected with internal USB devices, like USB card reader.

Assignment

1 +5V (fused)

2 +5V (fused)

3 USB-

4 USB-

5 USB+

6 USB+

7 Ground

8 Ground

9 Key

1

9

210

JUSB2

JUSB3

10 NC

JUSBV1/JUSBV2: Power Source Headers for USB Ports

Pin 1-2 Close:

JUSBV1: +5V for USB ports at JUSBLAN1.

JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3).

Pin 2-3 Close:

JUSBV1: USB ports at JUSBLAN1 are powered by +5V standby voltage.

JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V

standby v oltage.

13

1

3

Pin 1-2 close

13

1

3

JUSBV2

JUSBV1

13

1

3

Pin 2-3 close

Note:

In order to support this function “Power-On system vi a USB device,” “JUSBV1/ JUSBV2”

jumper cap should be placed on Pin 2-3 indi viduall y.

NF61V Micro AM2 SE/NF61S Micro AM2 SE

17

JAUDIOF1: Front Panel Audio Header

This header allows user to connect the front audio output cable with the PC front

panel. It will disable the output on back panel audio connectors.

Pin Assignment

1 Mic in

2 Ground

3 Mic power

4 Audio power

5 Right line

out

6 Ground

7 Reserved

8 Key

9 Left line out

10 Ground

1

9

2

10

JCDIN1: CD-ROM Audio-in Connector

This connector allows user to connect the audio source from the variaty devices,

like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.

Assignment

1 Left Channel

Input

2 Ground

3 Ground

14

4 Right Channel

Input

Motherboard Manual

18

JCMOS1: Clear CMOS Header

By placing the jumper on pin2-3, it allows user to restore the BIOS safe setting

and the CMOS data, please carefully follow the procedures to avoid damaging

the motherboard.

13

Pin 1-2 Close:

Normal Operation

(default).

1

3

13

Pin 2-3 Close:

Clear CMOS

data.

※ Clear CMOS Procedures:

1. Remove AC power line.

2. Set the jumper to “Pin 2-3 close”.

3. Wait for five seconds.

4. Set the jumper to “Pin 1-2 close”.

5. Power on the AC.

6. Reset your desired password or clear the CMOS data.

JCI1: Chassis O pen Header (Optional)

This connector allows system to monitor PC case open status. If the signal has

been triggered, it will record to the CMOS and show the message on next

boot-up.

Assignment

1 Case open

signal

1

2

2 Ground

Page is loading ...

Biostar NF61S MICRO AM2 SE User manual

This manual is also suitable for

Biostar NF61S MICRO AM2 SE User manual

in other languages

Related papers

Other documents