D-Link RANGEBOOSTER G WUA-2340 User manual

Brand: D-Link

Model: RANGEBOOSTER G WUA-2340

Category: Networking

Type: User manual

2D-Link WUA-2340 User Manual

Table of Contents

Product Overview ........................................................4

Package Contents....................................................4

System Requirements ............................................. 4

Introduction ..............................................................5

Features ...................................................................6

Hardware Overview .................................................7

Installation ....................................................................8

Getting Started ........................................................ 8

Remove Existing Installations ............................ 8

Disable Other Wireless Adapters ....................... 9

Wireless Installation Considerations ......................11

Software Installation ..............................................12

Windows Vista

™

Installation ............................. 13

Windows

XP Installation ................................. 18

Conﬁguration ............................................................. 23

D-Link Wireless Connection Manager ...................23

Windows Vista.................................................. 24

Wireless Networks .......................................24

Wi-Fi Protected Setup (WPS) ......................25

My Wireless Networks ..................................28

Add Proﬁle .................................................... 29

Modify Proﬁle ...............................................30

Support ........................................................31

About ............................................................32

Windows

XP ...................................................33

Wireless Networks .......................................33

Wi-Fi Protected Setup (WPS) ......................34

My Wireless Networks ..................................37

Add Proﬁle .................................................... 38

Modify Proﬁle ...............................................39

Support ........................................................40

About ............................................................41

Connect to a Wireless Network ................................ 42

Using Windows Vista

™

...........................................42

Using Windows

XP ............................................... 44

Disabling The Windows

XP Utility ...................45

Wireless Security .......................................................47

What is WEP? ........................................................47

What is WPA? ........................................................ 48

Conﬁgure WEP ......................................................49

Using the D-Link Utility ....................................49

Using the Windows Vista

™

Utility ......................51

Using the Windows

XP Utility .........................53

Conﬁgure WPA/WPA2 Passphrase ........................55

Using the D-Link Utility ....................................55

Using the Windows Vista

™

Utility ......................57

Using the Windows

XP Utility .........................59

Table of Contents

3D-Link WUA-2340 User Manual

Table of Contents

Conﬁgure WPA/WPA2 ............................................ 61

Using the D-Link Utility ....................................61

Conﬁgure 802.1x ...................................................63

Using the D-Link Utility ....................................63

Troubleshooting .........................................................65

Wireless Basics .........................................................69

Networking Basics .................................................... 74

Check your IP address ..........................................74

Windows

XP/2000 Users ................................74

Windows Vista

™

Users .....................................74

Statically Assign an IP address ............................. 75

Windows

XP/2000 Users ................................75

Windows Vista

™

Users .....................................76

Technical Speciﬁcations ........................................... 77

Contacting Technical Support ..................................78

Warranty .....................................................................79

Registration ................................................................ 84

4D-Link WUA-2340 User Manual

Section 1 - Product Overview

• D-Link WUA-2340 Wireless G USB Adapter

• Cradle

• Manual and Warranty on CD

• D-Link Wireless Connection Manager on CD

• Quick Installation Guide

System Requirements

• A computer or laptop with an available USB 2.0 port

• Windows

Vista

™

, XP (Service Pack 2) or 2000 (Service Pack 4)

• CD-ROM Drive

• 500MHz processor and at least 64MB of RAM

• An 802.11g access point or wireless router

Product Overview

Package Contents

5D-Link WUA-2340 User Manual

Section 1 - Product Overview

Introduction

The WUA-2340 Wireless USB Adapter is a convenient wireless connectivity solution for desktop or notebook PCs.

Instead of stringing Ethernet cables to your PC or dismantling your desktop computer case, the WUA-2340 can enable

802.11g wireless connectivity by simply utilizing your desktop or notebook PC’s USB port.

™

technology, the WUA-2340 delivers unparalleled performance and industry-wide

compatibility. With a maximum wireless signal rate of up to 108Mbps*, quickly transfer large ﬁles or view streaming

video with the WUA-2340.

The WUA-2340 Wireless USB Adapter includes an intuitive conﬁguration utility that allows you to discover and connect

to other wireless networks in nearby areas. In addition, the utility can also create detailed connectivity proﬁles of

networks you frequently access. You can also enable support for WPA/WPA2 and 802.1x for enhanced data encryption

and user authentication.

Like all other D-Link wireless adapters, the WUA-2340 Wireless USB Adapter can be used in peer-to-peer mode (ad-hoc)

to connect directly to other 802.11b/g wirelessly enabled computers or in client mode (infrastructure) to communicate

with other users through an access point or router.

Compact in size, robust in speed the WUA-2340 Wireless USB Adapter is great for travel and a convenient solution for

providing high performance wireless connectivity to your desktop or notebook PC. Enjoy the many beneﬁts of wireless

connectivity today!

* Maximum wireless signal rate derived from IEEE Standard 802.11g speciﬁcations. Actual data throughput will vary. Network conditions and

environmental factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput

rate. Environmental factors will adversely affect wireless signal range.

6D-Link WUA-2340 User Manual

Section 1 - Product Overview

• Provides maximum wireless signal rate of up to 108Mbps*.

• Compact size for placement anywhere.

• Convenience of Plug & Play installation.

• Fully 802.11b/802.11g compatible.

• Powered by the USB port; no external power source required.

• USB 2.0 standard

• Better Security with 802.1x and WPA/WPA2 - In addition to 64-bit and 128-bit WEP encryption, you can

also securely connect to a wireless network using 802.1x for wireless authentication, as well as WPA

(Wi-Fi Protected Access) providing you a much higher level of security for your data and communication

than has previously been available.

• Optimal wireless reception using its cradle (included). Position the WUA-2340 almost anywhere in your

workspace to achieve the best reception possible.

• Supports Infrastructure networks via an access point and Peer-to-Peer communication in Ad-Hoc

mode.

• User-friendly conﬁguration and diagnostic utilities.

Maximum wireless signal rate derived from IEEE Standard 802.11g speciﬁcations. Actual data throughput will vary. Network conditions and environmental

factors, including volume of network trafﬁc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental

factors will adversely affect wireless signal range.

Using a USB 1.1 port will adversely affect throughput.

Features

7D-Link WUA-2340 User Manual

Section 1 - Product Overview

Hardware Overview

USB Port

Used to connect the WUA-2340

to your computer.

Link Light

A blinking light indicates activity

on your wireless network.

8D-Link WUA-2340 User Manual

Section 2 - Installation

Getting Started

Installation

This section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in

device manager before installing your D-Link adapter. Also, if you have previously installed another wireless adapter,

please make sure any software is uninstalled.

Before installing your new D-Link wireless adapter, please verify the following:

• Remove any previous installations of wireless adapters

• Disable any built-in wireless adapters

• Verify the settings such as the SSID and security settings of the network(s) you want to connect to

Remove Existing Installations

If you’ve installed a different manufacture’s adapter or a different model D-Link adapter, make sure the software is

uninstalled before installing the new software. Some utilities may cause a conﬂict with the new software. If you plan

to use multiple adapters at different times, make sure the utilities are not set to load when your computer boots up.

Windows

XP users may use the built-in wireless utility for all adapters.

To remove any old software:

Windows

XP/Vista

™

users: Click Start > Control Panel > Add or Remove Programs.

Windows

2000 users: Click Start > Settings > Control Panel > Add or Remove Programs.

9D-Link WUA-2340 User Manual

Section 2 - Installation

Disable Other Wireless Adapters

Most newer laptops may include a built-in wireless adapter. To prevent any conﬂicts with the D-Link wireless adapter,

it is recommended to disable the wireless adapter (as well as any unused Ethernet adapters).

From the desktop, right-click on the My Computer icon and select

Properties.

Click the Hardware tab and then click Device Manager. Scroll down

the list and click the + sign to the left of Network Adapters.

Right-click the adapter you would like to disable and select

Disable.

10D-Link WUA-2340 User Manual

Section 2 - Installation

Click Yes to disable the adapter.

The adapter is now disabled. When disabled, a red X will be

displayed.

Disabling the adapter will not remove the drivers. If you would like

to use the adapter, simply right-click it and select Enable.

11D-Link WUA-2340 User Manual

Section 2 - Installation

Wireless Installation Considerations

The D-Link wireless adapter lets you access your network using a wireless connection from virtually anywhere within

the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls,

ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending

on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing

wireless range is to follow these basic guidelines:

1. Keep the number of walls and ceilings between the D-Link adapter and other network devices to a

minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position

your devices so that the number of walls or ceilings is minimized.

2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a

45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet

(14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead

of at an angle) for better reception.

3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on

range. Try to position access points, wireless routers, and computers so that the signal passes through

drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water

(ﬁsh tanks), mirrors, ﬁle cabinets, brick, and concrete will degrade your wireless signal.

4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that

generate RF noise.

5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and

home security systems), your wireless connection may degrade dramatically or drop completely. Make

sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits

a signal even if the phone in not in use.

12D-Link WUA-2340 User Manual

Section 2 - Installation

Warning: Do NOT install the WUA-2340 USB Adapter into your computer before installing the driver software

from the D-Link CD.

Turn on the computer and Insert the D-Link WUA-2340 Driver CD in the CD-ROM drive.

If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type

“D:\WUA-2340.exe” (where D: represents the drive letter of your CD-ROM drive).

If the CD Autorun function does not automatically start

on your computer, type “D:\Drivers\setup.exe”. If it does

start, proceed to the next screen.

Click Install Drivers.

Software Installation

13D-Link WUA-2340 User Manual

Section 2 - Installation

The InstallShield Wizard window will appear.

Click Next to continue.

By default setup will install to the default location: C:\Program

Files\D-Link\WUA-2340, where C: represents the drive letter of

your hard drive. To install to a different location click Browse and

specify the location. Click Next to continue.

Windows Vista

™

Installation

14D-Link WUA-2340 User Manual

Section 2 - Installation

The Wireless Connection Wizard will now appear.

If you want to manually connect to a wireless network, refer to

page 16. The following instructions will connect you to a wireless

network using Wi-Fi Protected Setup (WPS).

Insert the adapter into an available USB port on your computer.

If the Found New Hardware Wizard appears, click Cancel.

Select the Program Files folder location. Click Next to continue.

15D-Link WUA-2340 User Manual

Section 2 - Installation

To connect to your network using the WPS push button conﬁguration

method, click the virtual button as shown in the screenshot.

Press the WPS button on your access point or wireless router

within 2 minutes to establish connectivity.

When this screen appears, you have successfully connected to

your wireless network. Click Next to complete your setup.

Push Button Conﬁguration (PBC)

16D-Link WUA-2340 User Manual

Section 2 - Installation

To manually connect to your wireless network, select Manually

connect to a wireless network and then click Next.

Click the Scan button to display a list of wireless networks (site

survey). Click on the network name (SSID) and click Next.

Enter the network name (SSID) manually. If you enter the SSID

incorrectly, you will automatically be brought to the site survey

page. Click Scan to display the site survey page.

17D-Link WUA-2340 User Manual

Section 2 - Installation

Click Finish to continue. If you are prompted to reboot your

computer, select Yes, I want to restart my computer now.

When this screen appears, you are successfully connected to your

wireless network. Click Next to complete your setup.

18D-Link WUA-2340 User Manual

Section 2 - Installation

The InstallShield Wizard window will appear.

Click Next to continue.

By default setup will install to the default location: C:\Program

Files\D-Link\WUA-2340, where C: represents the drive letter of

your hard drive. To install to a different location click Browse and

specify the location.

Click Next to continue.

Select the Program Files folder location.

Click Next to continue.

Windows

XP Installation

19D-Link WUA-2340 User Manual

Section 2 - Installation

The D-Link conﬁguration wizard will now appear.

If you are using Windows

XP (SP2), you will have the option

to use either the D-Link utility or the built-in Windows

Wireless

utility.

Click Next to continue.

Insert the adapter into an available USB port on your

computer.

Optional: If desired or necessary, attach the cradle

between the WUA-2340 and your computer.

If the Found New Hardware Wizard appears, click Cancel.

Click Next to continue.

The Wireless Connection Wizard will now appear.

If you want to manually connect to a wireless network, refer to

page 21. The following instructions will connect you to a wireless

network using Wi-Fi Protected Setup (WPS).

20D-Link WUA-2340 User Manual

Section 2 - Installation

To connect to your network using the WPS push button

conﬁguration method, click the virtual button as shown in the

screenshot.

Press the WPS button on your access point or wireless router

within 2 minutes to establish connectivity.

When this screen appears, you have successfully connected to

your wireless network. Click Next to complete your setup.

Push Button Conﬁguration (PBC)

Page is loading ...

D-Link RANGEBOOSTER G WUA-2340 User manual

Brand: D-Link

Model: RANGEBOOSTER G WUA-2340

Category: Networking

Type: User manual

Download PDF

report

D-Link RANGEBOOSTER G WUA-2340 User manual

D-Link RANGEBOOSTER G WUA-2340 User manual

Related papers

Other documents