Introduction 17
Baseboard Management Controller (BMC) Management Utility
The BMC Management Utility provides a command line based remote
management application to manage all supported BMC functions. Use the
BMC Management Utility to manage a BMC from a remote management
station, and as a managed system's emergency management console. This
utility gives you the option of using a command line interface (either
Intelligent Platform Management Interface [IPMI shell] or a Serial-Over-LAN
proxy [SOL Proxy]) to access and manage the BMC.
The BMC monitors the system for critical events by communicating with
various sensors on the system board and sending alerts and logs events when
certain parameters exceed their preset thresholds. The BMC supports the
industry-standard IPMI specification, enabling you to configure, monitor, and
recover systems remotely.
The BMC provides the following features:
• Management access through the system's serial port and integrated NIC
• Fault logging and SNMP alerting
• Access to the system event log (SEL) and sensor status
• System function controls, including power on and off
• Support that is independent of the system's power or operating state
• Text console redirection for system setup, text-based utilities, and
operating system consoles
• Access to Red Hat Enterprise Linux and SUSE Linux Enterprise Server
serial console interfaces using SOL
• IPMItool: The ipmitool program provides a simple command-line interface
to BMC and features the ability to read the sensor data repository (SDR) and
print sensor values, display the contents of the System Event Log (SEL),
print Field Replaceable Unit (FRU) inventory information, read and set LAN
configuration parameters, and perform remote chassis power control.
Active Directory Snap-in Utility
The Microsoft Active Directory Snap-in utility provides an extension snap-in
to the Microsoft Active Directory, which allows you to manage Dell-specific
Active Directory objects.
You can use this option when you add the Dell-specific schema classes to the
Active Directory schema.