Kmart 42765547 User manual

Kmart Balance Bike Instruction Manual

Packing List

Handlebar

Stem

Head Tube

Fork

Tyre

Front Hub

Saddle

Quick Release

Assembly of Handlebar and Saddle

Assembly of Front Wheel Check and Run

Steps of Assembly

1. Loose the Inner hex bolt on the Stem and fix the stem into the head tube, tighten the bolt and make

sure that the minimun insert mark on stem can not be seen.

2. Push the seat post into the seat tube until the mark can not be seen. Tighten the screw to ensure a

steady height of the saddle.

3. Turn bike upside down and rest the handlebar and saddle on the floor. Set the front wheel between the

fork and fix the screws tightly. Make sure that the safety pin fit to the designated hole on each side.

4. Balance Bike is assembled. Check all screws being tightened and enjoy your riding now.

Maintenance

1. Clean with a soft cloth and a little water with washing liquid.

2. The product must not be stored in places with high temperature, intensive sun light, excessive dust

and must be kept dry.

WARNING

Item to be assembled by adult only. Choking Hazard, contains small assembly components with

functional sharp points and edges.

Seat Tube

This manual is also suitable for

Download PDF