2. thdstatic
  3. 3-Piece Armchair in Light Gray
3-Piece Armchair in Light Gray

thdstatic 3-Piece Armchair in Light Gray, CB-3PLGLS-123 User manual

  • Hello! I am an AI chatbot trained to assist you with the thdstatic 3-Piece Armchair in Light Gray User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
If you have any questions about the product,
please contact the email: [email protected]
HARDWARE
x 4
54 x 4
x 1
6
7
x 4
This product has been designed for seating two (2) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it.
This product is designed for home use and not intended for commercial use.
Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons.
Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
THIS INSTRUCTION BOOKLET CONTAINSIMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Seat Body
QTY:1
Leg
QTY:4
PARTS
2/8
Backrest
QTY:1
Arm
QTY:1 Pair
( In the storage underneath of seat body)
1
5
2
3 3
3/8
Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean flat surface.
HARDWARE
1
HARDWARE
x 4
5
3
1
Storage,
underneath of seat body.
3
2
4 x 4
x 1
6
4/8
Step 2 : Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms.
Please avoid overtightening.
5 × 4 × 4
5
5
3
5/8
Step 3 : Carefully lift and turn assembled arms onto its legs.Insert seat body metal plates to both arms as shown below.
Ensure it is correctly in place.
1
3
3
6/8
Step 4 : Insert backrest with ear piece metal plates to both arms as shown below. Ensuring is correctly in place.
2
7/8
Step 5: Insert backrest metal plates to both arms as shown below.Ensuring it is correctly in place.
2
8/8
Setp 6 : Finally, stretch and pull down rear cover evenly before securing velcro strip to seat base. Repeat if necess
a
for better fit.
This product has been designed for seating three (3) average adults. To prevent injury and damage to this unit, PROHIBIT jumping on it.
This product is designed for home use and not intended for commercial use.
Children under the age of 5, small infants and babies should not sleep alone on this product for safety reasons.
Recommended # of people needed for handling: 2 (however it is always better to have an extra hand.)
THIS INSTRUCTION BOOKLET CONTAINSIMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Seat Body
QTY:1
Leg
QTY:4
PARTS
2/8
Backrest
QTY:1
( In the storage underneath of seat body)
Arm
QTY:1 Pair
( In the storage underneath of seat body)
1
5
2
3
3 3
3/8
Step 1 : Carefully unpack parts/hardware from box and storage of seat body, place on a clean flat surface.
1
HARDWARE
1
3
3
2
Storage,
underneath of seat body.
HARDWARE
x 4
54 x 4
x 1
6
7
4/8
Step 2 : Place both arms as shown below, secure two legs into pre-drilled holes on the bottom of arms.
Please avoid overtightening.
5 × 4 × 4
5
5
3
/