JHS Pedals 3 Series User manual

CONTROLS

BLEND - Allows you to blend the wet and dry signals as you turn from left to right. All

the way left is fully dry, all the way right is fully wet. Fully wet can achieve an almost vibrato

eect.

RATE - Controls the speed of the LFO. Left is slower, right is faster.

WIDTH - Controls the width of the LFO. Left is more mild, right is more extreme.

FEEDBACK - Toggle up adds resonance to the eect by feeding the output back into the

input, creating a more intense phase by emphasizing certain frequencies.

JACKS

INPUT - 1/4” jack on the right side of the pedal.

OUTPUT - 1/4” jack on the left side of the pedal.

POWER - Requires 9V DC negative center power and consumes 70mA. Do not use more

than 9V DC. You will void your warranty.

PHASER

The 3-Series Phaser is a versatile and easy to use six-stage phaser pedal that is

inspired by the classic phaser circuits of the 1970s. It has all the standard phase

tones you would expect, but because of its unique Blend control and Feedback

toggle, you can achieve a wide range of modern and experimental tones.