Zebra NX-7510/NX-7520/NX-7530 Owner's manual
- Type
- Owner's manual
NX-7510/NX-7520/NX-7530 Series
Integrated Services Platform
Power Supply Assembly
Installation Instructions
Description PartNumber
NX 7500 AC POWER SUPPLY NX-7500-AC-PSU
NX 7500 DC POWER SUPPLY NX-7500-DC-PSU
Removing a Power Supply
To remove a power supply:
1. Remove the power cord from the power source to the power supply.
2. Push the black latch on the power supply to the right and pull outward to remove the power supply.
Installing a Power Supply
To remove a power supply:
1. Carefully unpack the power supply.
CAUTION! Ensure that the connectors at the rear of the power supply do not come into contact with your
hands or with the packing material as you unpack the power supply. Avoid damaging the
connectors as you insert the power supply.
2. Carefully insert the power supply into the services platform.
3. Push the power supply forward until the power supply is securely in place.
4. Push the black latch back into place until it clicks.
5. Reattach the power cord.
6. Observe a solid light on the power supply to confirm proper operation.
MN001693A01 Revision A April 2015
-
1
Zebra NX-7510/NX-7520/NX-7530 Owner's manual
- Type
- Owner's manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Dell PowerEdge R910 Technical Manual
-
Dell PowerEdge R7525 Owner's manual
-
Dell DSS 7500 Owner's manual
-
Epson EPL-7500 User manual
-
Magnum 6500 Owner's manual
-
Juniper MX10016 User manual
-
Cisco AIR-ANT2535SDW-R= Datasheet
-
Dell Storage SCv360 Quick start guide
-
-
Xerox 7500 User guide