CyberPower CRA11002 Quick start guide

Category
Wall & ceiling mounts accessories
Type
Quick start guide

This manual is also suitable for

Copyright © 2016 Cyber Power Systems, Inc. All rights reserved.
QUICK START GUIDE
Wall Mount Enclosure Fan KitWall Mount Enclosure Fan Kit
K01-0000549-00
CRA11002
CRA12002
Recommended Installation
Wall Mount Enclosure
M5x10 Screw
Wall Mount Fan
Specifications
Compatibility
Nominal Voltage
Plug Type
Power Cord Length
Mounting Hardware
Wall Mount Enclosures
6.5 ft (2 m)
8 (M5x10) Screws Included
208/240Vac
IEC-320 C14
110/120Vac
NEMA 5-15P
Model CRA11002 CRA12002
For warranty and additional information, please visit: www.cyberpower.com.
NOTE: The fans have an arrow pointing in the direction of the airflow. For correct
installation make sure that the fans are pulling air out of the enclosure.
Alternative Installation
CyberPower’s Wall Mount Enclosure Fan kit can also be installed on top of the enclosure.
1. Unscrew the metal protection cover. Keep the cover and hardware for later use.
Metal Protection Cover
2. Screw the cover back on the opposite side it was removed from. Then install
the fans on top of the wall mount enclosure as shown below.
AIR FLOW
Wall Mount Fan
Metal Protection Cover
M5x10 Screw
  • Page 1 1
  • Page 2 2

CyberPower CRA11002 Quick start guide

Category
Wall & ceiling mounts accessories
Type
Quick start guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI