ESAB Tradesmarc 181/243 is a light duty composite MIG welding power source for welding using solid wires with shielding gas or self-shielding/gasless flux cored wires. The device is protected against overheating with a thermal cut-out which resets automatically. With a wire feed speed of 1-15 m/min and voltage steps of 7 or 10, it can weld with unalloyed, stainless, aluminum, and tube wires, with a wire reel capacity of 5-15 kg. The device dimensions are 780х430х530 mm and it weighs 47 kg. ESAB Tradesmarc 181/243 is designed for indoor use.