Vista QNVR08P Installation and User Manual

Installation and User manual

QNVR04P/08P

HD Network Video Recorder

with PoE

2

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

3

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Before You Begin

Read these instructions before installing or operating this product.

Note: This installation should be made by a qualified service person and should conform to local codes.

This manual provides installation and operation information. To use this document, you must have the following

minimum qualifications:

 A basic knowledge of CCTV systems and components

 A basic knowledge of electrical wiring and low-voltage electrical connections

Intended use

Only use this product for its designated purpose; refer to the product specification and user documentation.

Customer Support

For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and any

other documentation provided. If you still have questions, please contact Norbain Technical Support and Sales:

Norbain SD Ltd, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41

5TP, England.

UK +44 (0) 118 912 5000

Note: You should be at the equipment and ready with details before calling Technical Support.

Conventions Used in this Manual

Boldface or button icons highlight command entries. The following WARNING, CAUTION and Note statements

identify potential hazards that can occur if the equipment is not handled properly:

* WARNING:

Improper use of this equipment can cause severe bodily injury or equipment damage.

** Caution:

Improper use of this equipment can cause equipment damage.

Note: Notes contain important information about a product or procedure.

This apparatus is manufactured to comply with the radio interference.

A Declaration of Conformity in accordance with the following EU standards has been made.

The manufacturer declares that the product supplied with this document is compliant the p

rovisions of the EMC Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all

associated amendments.

All lead-free products offered by the company comply with the requirements of the European law

on the Restriction of Hazardous Substances (RoHS) directive: 2011/65/EU, which means our

manufacture processes and products are strictly “lead-free” and without the hazardous

substances cited in the directive.

The crossed-out wheeled bin mark symbolizes that within the European Union the product must

be collected separately at the product end-of-life. This applies to your product and any

peripherals marked with this symbol. Do not dispose of these products as unsorted municipal

waste.

* This symbol indicates electrical warnings and cautions.

4

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

** This symbol indicates general warnings and cautions.

NORBAIN SD LTD reserves the right to make changes to the product and specification of the product from time to

time without prior notice.

WARNINGS AND CAUTIONS:

To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other

openings on the equipment.

CAUTION

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

5

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Contents

BEFORE YOU BEGIN .......................................................................................................... 3

INTENDED USE.................................................................................................................... 3

CUSTOMER SUPPORT ........................................................................................................ 3

WARNINGS AND CAUTIONS: ............................................................................................. 4

CAUTION ........................................................................................................................................................ 4

OVERVIEW ........................................................................................................................... 7

1. CONTENTS OF PACKING .................................................................................................... 7

2. FEATURES ....................................................................................................................... 8

INSTALLATION .................................................................................................................... 9

1. FRONT PANEL CONTROLS ................................................................................................. 9

2. REAR PANEL CONNECTORS .............................................................................................10

3. REMOTE CONTROL ..........................................................................................................12

4. CONNECTION GUIDE ........................................................................................................13

5. TURNING ON THE NVR ....................................................................................................15

OPERATION ........................................................................................................................16

1. NAVIGATION ....................................................................................................................16

1-1. Mouse Control ........................................................................................................................................ 16

1-2. Menu Navigation .................................................................................................................................... 16

2. MONITORING ...................................................................................................................17

2-1. OSD Description ..................................................................................................................................... 17

2-2. Select Channel ....................................................................................................................................... 17

2-3. Digital Zoom ........................................................................................................................................... 18

3. PLAYBACK ......................................................................................................................19

3-1. OSD Description ..................................................................................................................................... 19

3-2. Playback Control .................................................................................................................................... 19

3-3. Playback Search .................................................................................................................................... 20

4. PTZ CONTROL ................................................................................................................21

4-1. PTZ Control by mouse ............................................................................................................................ 21

4-2. PTZ Control by remote keyboard ........................................................................................................... 23

4-3. PTZ Control by remote controller ........................................................................................................... 23

4-4. PTZ Control by Client software ............................................................................................................... 23

SETUP MENU ......................................................................................................................24

1. DISPLAY .........................................................................................................................24

1-1. OSD Setting ........................................................................................................................................... 24

1-2. Live Setting ............................................................................................................................................. 26

1-3. Camera Covert ....................................................................................................................................... 27

1-4. Camera Name ........................................................................................................................................ 27

2. IP CAMERA .....................................................................................................................28

2-1. Basic ....................................................................................................................................................... 28

2.2 Accessing the cameras Web pages ......................................................................................................... 30

2-2. Normal (Time Lapse) .............................................................................................................................. 31

2-3. Alarm ...................................................................................................................................................... 32

2-4. Motion ..................................................................................................................................................... 33

2-5. Schedule ................................................................................................................................................ 34

3. SYSTEM ..........................................................................................................................36

3-1. Basic ....................................................................................................................................................... 36

3-2. Disk ........................................................................................................................................................ 38

3-3. Account................................................................................................................................................... 39

3-5. PTZ Setup .............................................................................................................................................. 41

6

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

3-6. More ....................................................................................................................................................... 41

4. NETWORK .......................................................................................................................42

4-1. Basic ....................................................................................................................................................... 42

4-2. NTP ........................................................................................................................................................ 43

5. EVENT ............................................................................................................................44

5-1. E-Mail Registration ................................................................................................................................. 44

5-2. E-mail Out .............................................................................................................................................. 45

5-4. Alarm Out ............................................................................................................................................... 46

SEARCH MENU ...................................................................................................................47

1. SEARCHING RECORDED DATA ..........................................................................................47

1-1. Date/Time Search................................................................................................................................... 47

1-2. Event Search .......................................................................................................................................... 48

1-3. Calendar Search .................................................................................................................................... 48

1-4. Bookmark Search ................................................................................................................................... 49

2. ARCHIVING EVIDENCE TO DVD/CD OR USB .....................................................................52

3. LOG ..............................................................................................................................54

CLIENT VIEWER SOFTWARE ............................................................................................55

1. LIVE MONITORING ...........................................................................................................58

2. REMOTE SEARCH ............................................................................................................61

2-1. Search .................................................................................................................................................... 61

2-2. Archive.................................................................................................................................................... 63

2-3. Remote Log ............................................................................................................................................ 65

2-4. Information ............................................................................................................................................. 66

3. REMOTE SETUP (MENU SETTINGS - SAME AS DVR) ...........................................................67

3-1. Display .................................................................................................................................................... 67

3-3. System ................................................................................................................................................... 69

3-4. Event ...................................................................................................................................................... 71

4. LOCAL SEARCH (VIEWING DOWNLOADED FOOTAGE) ...........................................................73

4-1. Search .................................................................................................................................................... 73

4-2. Log ......................................................................................................................................................... 75

4-3. Info ......................................................................................................................................................... 75

5. LOCAL SETUP .................................................................................................................76

5-1. Global ..................................................................................................................................................... 76

5-2. Opacity ................................................................................................................................................... 76

5-3. Audio Buffer ............................................................................................................................................ 77

5-4. Camera Name ........................................................................................................................................ 77

6. TELEMETRY CONTROL (PAN/TILT/ZOOM/FOCUS) ...............................................................78

6-1. Pan / Tilt / Zoom / Focus ........................................................................................................................ 78

6-2. Preset / Learn ......................................................................................................................................... 79

7. SCREEN POSITION SAVE/LOAD ........................................................................................80

7-1. Screen Position Save ............................................................................................................................. 80

7-2. Screen Position Load ............................................................................................................................. 80

8. FIRMWARE UPGRADE ......................................................................................................81

APPENDIX 1 ........................................................................................................................82

DYNAMIC IP (SUPPORTING DDNS SERVER) .........................................................................82

APPENDIX 2 ........................................................................................................................84

SETUP FOR DVR PORT & WEB SERVER PORT USING IP SHARING ROUTER ...............................84

APPENDIX 3 ........................................................................................................................85

SPECIFICATION ...................................................................................................................85

7

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Overview

1. Contents of Packing

Mouse

Installation

CD

AC Adaptor

Remote Controller

Battery

(AAA x2)

8

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

2. Features

● Convenience

- User-friendly GUI (Graphical User Interface)

- Easy-to-use menu structure

- Easy-to-use recorded data search (Time, Date, Motion, and Alarm)

- Easy-to control via IR remote control and USB 2.0 mouse.

● Stability

- Auto restart after power interruption

- DB structure offers data stabilisation and better storage utilisation

● Expandability

- Remote NVR’s can be controlled using the supplied software client viewer.

● Technology

- Embedded LINUX OS

- Multi-Decoding (H.264/MPEG4/JPEG)

- High-resolution & high-quality H.264 algorithm

- Uses watermarking & scrambling technologies,

● Functionality

- Variable recording function (normal, alarm, motion, schedule)

- RS485 Telemetry

- Full channel real-time monitoring

- Live monitoring, recording, playback, backup, remote access simultaneously

- Multi channel playback

- Variable events notification to e-mail, buzzer or PC Client system

9

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Installation

1. Front Panel Controls

① Power

System Power On/Off

② Rewind ( )

Reverse play of recorded data. Press again to enter fast rewind mode in play mode.

③ Pause ( ▌▌)

To freeze picture on playback mode and live mode.

④ Forward Play ( )

Playback of the recorded data. Press again to enter fast forward mode in play mode.

⑤ Stop (■)

To stop playback and go back to live mode.

⑥ Menu

Displays the menu on the screen

⑦ Search

Entering search mode

⑧ Arrow Buttons

Moves the cursor while in menu mode

⑨ Select

Menu selection

⑩ Indicator

- POWER : System Power On/Off (When power is on, the light will be illuminated)

- REC : Recording status (When recording is on, the light will be illuminated)

- PLAY : Playback status (When playing is on, the light will be illuminated)

- NET : Network status (When network is connected, the light will flash)

⑪ USB Ports

USB connector for mouse control & downloading to USB memory.

⑩ ⑪

① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨

10

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

2. Rear Panel Connectors

[QNVR04P ]

[QNVR08P]

① DC 12V IN

DC 12V input for NVR

② HDMI

HDMI output port (1080p)

⑥

⑦

⑨

⑧

②

③

④

⑤

⑩

①

⑪

②

③

④

⑤

⑩

①

⑪

11

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

③ VGA

VGA video output for main monitor (1024x768 to 1920x1080)

④ Network Port for PC Client

Connecting to the PC through Internet or LAN

⑤ AUDIO OUT

Audio output

⑥ TEL (PTZ Camera Controller)

Serial Communication for Pan / Tilt Camera

⑦ KBD (Keyboard Controller)

Serial Communication for P/T/Z Control Keyboard

⑧ ALARM

Alarm(relay) output port

⑨ SENSOR IN

4 Sensor input ports

⑩ Network Ports for IP Camera (QNVR04P: 4 Ports , QNVR08P: 8 Ports)

Connecting to the PoE IP cameras

Note: Access to the cameras web pages for set up is carried out via Port 4 on the 4 chn and

Port 8 on the 8 chn.

⑪ DC 48V IN

DC 48V input for PoE

12

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

3. Remote Control

① POWER : Power on/off

② P/T/Z : Entering PTZ Setup menu directly

③ REC : Start & Stop Recording

④ Numbers and letters (1 to 9)

⑤ INFO : Direct access system infomation

ID : Entering remocon ID set mode

MUTE : Audio Mute

AUDIO : Switches through Audio channels

⑥ MENU: Entering system menu

SEARCH: Entering search

ARROW : Left, Right, Up and Down

SEL : Select/Enter

⑦ VOL +/- : Up, down volume

⑧ CH +/- : Up, down channel

⑨ (◀)◀ : Reverse play

▶(▶) : Play (or fast forward)

I I : Pause

■ : Stop playback

⑩ OSD : On Screen Display ON/OFF

SEQ : Sequence operation

LOG : Direct access Log list

⑪ CAM : Changing PTZ icon

P/T : Pan &Tilt

Z/F : Zoom/ & Focus

DIS : Channel Division

⑩

①

②

③

④

⑤

⑥

⑧

⑨

⑦

⑪

13

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

4. Connection Guide

Connecting the monitor

There are two available monitor outputs on NVR.

● HDMI output : Connect to the HDMI port of the HD monitor(HDTV).

● VGA output : Connect to the VGA port of the VGA monitor.

Connecting to a network

Use the ethernet port to connect to remote PC and IP cameras.

● Port for PC Client : Connect to the PC.

● Ports for IP Camera : Connect to the IP cameras with PoE.

Connecting audio

To listen to live or recorded audio, connect to an amplified speaker system.

● Audio output : Connect to the audio in of the audio AMP.

VGA

Monitor

HDTV

Sensor

PC (Client)

IP Camera

Speaker

System

PTZ

Camera

Keyboard

Siren

14

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Connecting to a sensor input

There are 4 individual alarm inputs marked as Sensor In (1-4).

● Sensor inputs : Connect to (+) terminal of a sensor.

● Common GND : Connect to (–) terminals of sensors.

Connecting to a alarm output

The DVR can activate external devices such as buzzers or lights using the relay.

.

● Alarm A : Connect to (+) terminal of buzzer or light.

● Alarm B : Connect to (–) terminals of buzzer or light.

Connecting to a PTZ camera

This RS485 connector can be used to control Pan / Tilt / Zoom camera.

● Tel (+) : Connect to RS485 Rx(+) of PTZ camera.

● Tel (-) : Connect to RS485 Rx(-) of PTZ camera.

Common

GND

Sensor

Inputs

Alarm (B)

Alarm (A)

Tel (+)

Tel (-)

15

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Connecting to a remote keyboard

This RS485 connector is for a control keyboard.

● Kbd (+) : Connect to RS485 Tx(+) of the keyboard.

● Kbd (-) : Connect to RS485 Tx(-) of the keyboard.

5. Turning on the NVR

1. Connect the AC adaptor.

2. Connect IP camera cables.

3. Connect a network cable and a monitor cable.

4. Plug in and wait until the main screen is displayed on the connected monitor; this process

may take a couple of minutes.

Kbd (+)

Kbd (-)

16

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Operation

1. Navigation

You can navigate the on screen menus using the front panel buttons, remote controller or

mouse.

1-1. Mouse Control

Right clicking the mouse brings up the following popup menu.

① Setup Menu

② Search Menu

③ PAN/Tilt Menu

④ Focus/Zoom Menu

⑤ Power Button

⑥ Sequence Button

⑦ Playback Button

⑧ Eject Button

⑨ Volume Up/Down Button

⑩ Multiscreen Display Button

⑪ Channel Up/Down Button

1-2. Menu Navigation

To enter the Setup menu, the user has to have the required access rights and be logged on.

Press the Menu button or right click with mouse on screen and select the menu icon.

The following screen will be displayed asking for password.

① Select the user ID.

② Enter the password.

The default password is 00000000(8 zeros).

③ Press OK, the setup menu will be displayed

on screen.

All menus are navigated around using the Left/

Right/ Up/ Down and the Select button or mouse.

To step back out of the menus, press MENU button

or click the right button of the mouse.

①

②

③

⑦

⑨

⑪

⑤

⑧

⑩

①

③

⑥

⑨

⑪

②

④

17

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

2. Monitoring

2-1. OSD Description

The Status Bar on screen shows HDD capacity, network connection, current time, etc.

① HDD capacity : Used capacity / Total capacity

② Multi-screen Display icons : Single/ 4 way

③ USB memory connection

④ Mouse connection

⑤ Network connection

⑥ Current Date/Time

2-2. Select Channel

Use the Multiscreen display button ( ) on the popup menu to select the display mode.

Single Display 4 way split Display 9 way split Display

(HN1083 only)

Also you can use the DIS button on the remote controller to change the display mode.

Display switches in the following order when the DIS button is pressed.

Single Channel  4 Channel  9 Channel  Single Channel

①

⑤

②

③

⑥

④

18

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

2-3. Digital Zoom

Left-click and drag the mouse to set the desired area for zoom in live or playback mode. (It is

available in single screen mode.)

Click the left button on the mouse.

The screen will change to the zoomed image with a small image displayed in the upper right

hand corner of the screen

The red box on the small picture indicates the position of the magnified image.

You can change the magnification of image and move the position of the magnified

Image, by rotating the mouse wheel

.

Drag the image to move the position of the magnified image.

Click the right button on the mouse to return to the original mage.

Red box

19

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

3. Playback

Click the right button on the mouse, the popup menu will be displayed on screen.

To begin playback, press the Play button on the popup menu.

3-1. OSD Description

The Control Bar on screen shows Playback control buttons, Progress bar, Display mode

buttons, Playback time, etc.

① Previous/ Next time buttons ⑨ Reverse Slow Play button

② Time Bar ⑩ Slow Play button

③ Playback Speed Display ⑪ Replay button

④ Display mode buttons (1/4/9/16ch) ⑫ Add Bookmark button

⑤ Stop button ⑬ Search Bookmark button

⑥ Pause button ⑭ Quick Archive button

⑦ Reverse Play button ⑮ Playback Date & Time

⑧ Play button

3-2. Playback Control

Playback

When the Play button(⑧) is pressed, the unit will play forward at the rate the data was

recorded. While in the play mode, the user may change the playback direction, playback

speed. To return to play forward operations, press the Play button(⑧).

Reverse Play

To begin reverse playback, press the Reverse Play button(⑦).

④

⑫

⑬

③

⑮

⑭

①

②

⑩

⑧

⑥

⑤

⑦

⑨

⑪

20

QNVR_PoE 4 and 8 channel manual V1.0

QVNR04P/08P installation and user manual

Pause

During playback, press the Pause button(⑥). This feature pauses all full screen and

multiscreen images. When this button is pressed in the pause mode, the unit will play.

Single Frame Advance

During the pause mode, press the Play button(⑧) to view the frame directly after the frame

displayed on screen.

Single Frame Rewind

During the pause mode, press the Reverse Play button(⑦) to view the frame directly before

the frame displayed on screen.

Fast Forward

In playback mode, press the Play button(⑧) to switch between various fast play modes such

as x2, x4, x8, x16, x32 play.

Fast Backward

In reverse playback mode, press the Reverse Play button(⑦) to switch between various

reverse play modes such as x2, x4, x8, x16 reverse play.

Slow Playback

In playback mode, press the Slow Play button(⑩) to switch between various slow play

modes such as x1/2, x1/4, x1/8, x1/16, x1/32 slow play.

Slow Reverse Play

In playback mode, press the Reverse Slow Play button(⑨) to switch between various slow

play modes such as x1/2, x1/4, x1/8, x1/16, x1/32 reverse slow play.

Stop

To stop playback and return to the live mode, press the Stop button(⑧).

3-3. Playback Search

The user can search the recorded video during playback.

The recorded video is indicated by a colour bar on the time bar(②).

You can use the Previous/ Next time buttons(①) to view if there are more recorded data.

Click the mouse at the desired point of the colour bar, you can view the recorded data.

Page is loading ...

Vista QNVR08P Installation and User Manual

This manual is also suitable for

Vista QNVR08P Installation and User Manual

Related papers

Other documents