Vista QNVR04P Installation and User Manual

Category
Digital Video Recorders (DVR)
Type
Installation and User Manual

This manual is also suitable for

Installation and User manual
QNVR04P/08P
HD Network Video Recorder
with PoE
2
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
3
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Before You Begin
Read these instructions before installing or operating this product.
Note: This installation should be made by a qualified service person and should conform to local codes.
This manual provides installation and operation information. To use this document, you must have the following
minimum qualifications:
A basic knowledge of CCTV systems and components
A basic knowledge of electrical wiring and low-voltage electrical connections
Intended use
Only use this product for its designated purpose; refer to the product specification and user documentation.
Customer Support
For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and any
other documentation provided. If you still have questions, please contact Norbain Technical Support and Sales:
Norbain SD Ltd, 210 Wharfedale Road, IQ Winnersh, Wokingham, Berkshire RG41
5TP, England.
UK +44 (0) 118 912 5000
Note: You should be at the equipment and ready with details before calling Technical Support.
Conventions Used in this Manual
Boldface or button icons highlight command entries. The following WARNING, CAUTION and Note statements
identify potential hazards that can occur if the equipment is not handled properly:
* WARNING:
Improper use of this equipment can cause severe bodily injury or equipment damage.
** Caution:
Improper use of this equipment can cause equipment damage.
Note: Notes contain important information about a product or procedure.
This apparatus is manufactured to comply with the radio interference.
A Declaration of Conformity in accordance with the following EU standards has been made.
The manufacturer declares that the product supplied with this document is compliant the p
rovisions of the EMC Directive 2004/108/EC, the CE Marking Directive 93/68 EEC and all
associated amendments.
All lead-free products offered by the company comply with the requirements of the European law
on the Restriction of Hazardous Substances (RoHS) directive: 2011/65/EU, which means our
manufacture processes and products are strictly “lead-free” and without the hazardous
substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must
be collected separately at the product end-of-life. This applies to your product and any
peripherals marked with this symbol. Do not dispose of these products as unsorted municipal
waste.
* This symbol indicates electrical warnings and cautions.
4
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
** This symbol indicates general warnings and cautions.
NORBAIN SD LTD reserves the right to make changes to the product and specification of the product from time to
time without prior notice.
WARNINGS AND CAUTIONS:
To reduce the risk of fire or electric shock, do not insert any metallic objects through the ventilation grills or other
openings on the equipment.
CAUTION
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
5
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Contents
BEFORE YOU BEGIN .......................................................................................................... 3
INTENDED USE.................................................................................................................... 3
CUSTOMER SUPPORT ........................................................................................................ 3
WARNINGS AND CAUTIONS: ............................................................................................. 4
CAUTION ........................................................................................................................................................ 4
CAUTION ........................................................................................................................................................ 4
OVERVIEW ........................................................................................................................... 7
1. CONTENTS OF PACKING .................................................................................................... 7
2. FEATURES ....................................................................................................................... 8
INSTALLATION .................................................................................................................... 9
1. FRONT PANEL CONTROLS ................................................................................................. 9
2. REAR PANEL CONNECTORS .............................................................................................10
3. REMOTE CONTROL ..........................................................................................................12
4. CONNECTION GUIDE ........................................................................................................13
5. TURNING ON THE NVR ....................................................................................................15
OPERATION ........................................................................................................................16
1. NAVIGATION ....................................................................................................................16
1-1. Mouse Control ........................................................................................................................................ 16
1-2. Menu Navigation .................................................................................................................................... 16
2. MONITORING ...................................................................................................................17
2-1. OSD Description ..................................................................................................................................... 17
2-2. Select Channel ....................................................................................................................................... 17
2-3. Digital Zoom ........................................................................................................................................... 18
3. PLAYBACK ......................................................................................................................19
3-1. OSD Description ..................................................................................................................................... 19
3-2. Playback Control .................................................................................................................................... 19
3-3. Playback Search .................................................................................................................................... 20
4. PTZ CONTROL ................................................................................................................21
4-1. PTZ Control by mouse ............................................................................................................................ 21
4-2. PTZ Control by remote keyboard ........................................................................................................... 23
4-3. PTZ Control by remote controller ........................................................................................................... 23
4-4. PTZ Control by Client software ............................................................................................................... 23
SETUP MENU ......................................................................................................................24
1. DISPLAY .........................................................................................................................24
1-1. OSD Setting ........................................................................................................................................... 24
1-2. Live Setting ............................................................................................................................................. 26
1-3. Camera Covert ....................................................................................................................................... 27
1-4. Camera Name ........................................................................................................................................ 27
2. IP CAMERA .....................................................................................................................28
2-1. Basic ....................................................................................................................................................... 28
2.2 Accessing the cameras Web pages ......................................................................................................... 30
2-2. Normal (Time Lapse) .............................................................................................................................. 31
2-3. Alarm ...................................................................................................................................................... 32
2-4. Motion ..................................................................................................................................................... 33
2-5. Schedule ................................................................................................................................................ 34
3. SYSTEM ..........................................................................................................................36
3-1. Basic ....................................................................................................................................................... 36
3-2. Disk ........................................................................................................................................................ 38
3-3. Account................................................................................................................................................... 39
3-5. PTZ Setup .............................................................................................................................................. 41
6
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
3-6. More ....................................................................................................................................................... 41
4. NETWORK .......................................................................................................................42
4-1. Basic ....................................................................................................................................................... 42
4-2. NTP ........................................................................................................................................................ 43
5. EVENT ............................................................................................................................44
5-1. E-Mail Registration ................................................................................................................................. 44
5-2. E-mail Out .............................................................................................................................................. 45
5-4. Alarm Out ............................................................................................................................................... 46
SEARCH MENU ...................................................................................................................47
1. SEARCHING RECORDED DATA ..........................................................................................47
1-1. Date/Time Search................................................................................................................................... 47
1-2. Event Search .......................................................................................................................................... 48
1-3. Calendar Search .................................................................................................................................... 48
1-4. Bookmark Search ................................................................................................................................... 49
2. ARCHIVING EVIDENCE TO DVD/CD OR USB .....................................................................52
3. LOG ..............................................................................................................................54
CLIENT VIEWER SOFTWARE ............................................................................................55
1. LIVE MONITORING ...........................................................................................................58
2. REMOTE SEARCH ............................................................................................................61
2-1. Search .................................................................................................................................................... 61
2-2. Archive.................................................................................................................................................... 63
2-3. Remote Log ............................................................................................................................................ 65
2-4. Information ............................................................................................................................................. 66
3. REMOTE SETUP (MENU SETTINGS - SAME AS DVR) ...........................................................67
3-1. Display .................................................................................................................................................... 67
3-3. System ................................................................................................................................................... 69
3-4. Event ...................................................................................................................................................... 71
4. LOCAL SEARCH (VIEWING DOWNLOADED FOOTAGE) ...........................................................73
4-1. Search .................................................................................................................................................... 73
4-2. Log ......................................................................................................................................................... 75
4-3. Info ......................................................................................................................................................... 75
5. LOCAL SETUP .................................................................................................................76
5-1. Global ..................................................................................................................................................... 76
5-2. Opacity ................................................................................................................................................... 76
5-3. Audio Buffer ............................................................................................................................................ 77
5-4. Camera Name ........................................................................................................................................ 77
6. TELEMETRY CONTROL (PAN/TILT/ZOOM/FOCUS) ...............................................................78
6-1. Pan / Tilt / Zoom / Focus ........................................................................................................................ 78
6-2. Preset / Learn ......................................................................................................................................... 79
7. SCREEN POSITION SAVE/LOAD ........................................................................................80
7-1. Screen Position Save ............................................................................................................................. 80
7-2. Screen Position Load ............................................................................................................................. 80
8. FIRMWARE UPGRADE ......................................................................................................81
APPENDIX 1 ........................................................................................................................82
DYNAMIC IP (SUPPORTING DDNS SERVER) .........................................................................82
APPENDIX 2 ........................................................................................................................84
SETUP FOR DVR PORT & WEB SERVER PORT USING IP SHARING ROUTER ...............................84
APPENDIX 3 ........................................................................................................................85
SPECIFICATION ...................................................................................................................85
7
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Overview
1. Contents of Packing
Mouse
Installation
CD
AC Adaptor
Remote Controller
Battery
(AAA x2)
8
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
2. Features
● Convenience
- User-friendly GUI (Graphical User Interface)
- Easy-to-use menu structure
- Easy-to-use recorded data search (Time, Date, Motion, and Alarm)
- Easy-to control via IR remote control and USB 2.0 mouse.
Stability
- Auto restart after power interruption
- DB structure offers data stabilisation and better storage utilisation
● Expandability
- Remote NVR’s can be controlled using the supplied software client viewer.
Technology
- Embedded LINUX OS
- Multi-Decoding (H.264/MPEG4/JPEG)
- High-resolution & high-quality H.264 algorithm
- Uses watermarking & scrambling technologies,
Functionality
- Variable recording function (normal, alarm, motion, schedule)
- RS485 Telemetry
- Full channel real-time monitoring
- Live monitoring, recording, playback, backup, remote access simultaneously
- Multi channel playback
- Variable events notification to e-mail, buzzer or PC Client system
9
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Installation
1. Front Panel Controls
Power
System Power On/Off
Rewind ( )
Reverse play of recorded data. Press again to enter fast rewind mode in play mode.
Pause ( ▌▌)
To freeze picture on playback mode and live mode.
Forward Play ( )
Playback of the recorded data. Press again to enter fast forward mode in play mode.
Stop ()
To stop playback and go back to live mode.
Menu
Displays the menu on the screen
Search
Entering search mode
Arrow Buttons
Moves the cursor while in menu mode
Select
Menu selection
Indicator
- POWER : System Power On/Off (When power is on, the light will be illuminated)
- REC : Recording status (When recording is on, the light will be illuminated)
- PLAY : Playback status (When playing is on, the light will be illuminated)
- NET : Network status (When network is connected, the light will flash)
USB Ports
USB connector for mouse control & downloading to USB memory.
10
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
2. Rear Panel Connectors
[QNVR04P ]
[QNVR08P]
DC 12V IN
DC 12V input for NVR
HDMI
HDMI output port (1080p)
11
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
VGA
VGA video output for main monitor (1024x768 to 1920x1080)
Network Port for PC Client
Connecting to the PC through Internet or LAN
AUDIO OUT
Audio output
TEL (PTZ Camera Controller)
Serial Communication for Pan / Tilt Camera
KBD (Keyboard Controller)
Serial Communication for P/T/Z Control Keyboard
ALARM
Alarm(relay) output port
SENSOR IN
4 Sensor input ports
Network Ports for IP Camera (QNVR04P: 4 Ports , QNVR08P: 8 Ports)
Connecting to the PoE IP cameras
Note: Access to the cameras web pages for set up is carried out via Port 4 on the 4 chn and
Port 8 on the 8 chn.
DC 48V IN
DC 48V input for PoE
12
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
3. Remote Control
POWER : Power on/off
P/T/Z : Entering PTZ Setup menu directly
REC : Start & Stop Recording
Numbers and letters (1 to 9)
INFO : Direct access system infomation
ID : Entering remocon ID set mode
MUTE : Audio Mute
AUDIO : Switches through Audio channels
MENU: Entering system menu
SEARCH: Entering search
ARROW : Left, Right, Up and Down
SEL : Select/Enter
VOL +/- : Up, down volume
CH +/- : Up, down channel
() : Reverse play
() : Play (or fast forward)
I I : Pause
: Stop playback
OSD : On Screen Display ON/OFF
SEQ : Sequence operation
LOG : Direct access Log list
CAM : Changing PTZ icon
P/T : Pan &Tilt
Z/F : Zoom/ & Focus
DIS : Channel Division
13
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
4. Connection Guide
Connecting the monitor
There are two available monitor outputs on NVR.
HDMI output : Connect to the HDMI port of the HD monitor(HDTV).
VGA output : Connect to the VGA port of the VGA monitor.
Connecting to a network
Use the ethernet port to connect to remote PC and IP cameras.
Port for PC Client : Connect to the PC.
Ports for IP Camera : Connect to the IP cameras with PoE.
Connecting audio
To listen to live or recorded audio, connect to an amplified speaker system.
Audio output : Connect to the audio in of the audio AMP.
VGA
Monitor
HDTV
Sensor
PC (Client)
IP Camera
Speaker
System
PTZ
Camera
Keyboard
Siren
14
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Connecting to a sensor input
There are 4 individual alarm inputs marked as Sensor In (1-4).
Sensor inputs : Connect to (+) terminal of a sensor.
Common GND : Connect to () terminals of sensors.
Connecting to a alarm output
The DVR can activate external devices such as buzzers or lights using the relay.
.
Alarm A : Connect to (+) terminal of buzzer or light.
Alarm B : Connect to () terminals of buzzer or light.
Connecting to a PTZ camera
This RS485 connector can be used to control Pan / Tilt / Zoom camera.
Tel (+) : Connect to RS485 Rx(+) of PTZ camera.
Tel (-) : Connect to RS485 Rx(-) of PTZ camera.
Common
GND
Sensor
Inputs
Alarm (B)
Alarm (A)
Tel (+)
Tel (-)
15
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Connecting to a remote keyboard
This RS485 connector is for a control keyboard.
Kbd (+) : Connect to RS485 Tx(+) of the keyboard.
Kbd (-) : Connect to RS485 Tx(-) of the keyboard.
5. Turning on the NVR
1. Connect the AC adaptor.
2. Connect IP camera cables.
3. Connect a network cable and a monitor cable.
4. Plug in and wait until the main screen is displayed on the connected monitor; this process
may take a couple of minutes.
Kbd (+)
Kbd (-)
16
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Operation
1. Navigation
You can navigate the on screen menus using the front panel buttons, remote controller or
mouse.
1-1. Mouse Control
Right clicking the mouse brings up the following popup menu.
Setup Menu
Search Menu
PAN/Tilt Menu
Focus/Zoom Menu
Power Button
Sequence Button
Playback Button
Eject Button
Volume Up/Down Button
Multiscreen Display Button
Channel Up/Down Button
1-2. Menu Navigation
To enter the Setup menu, the user has to have the required access rights and be logged on.
Press the Menu button or right click with mouse on screen and select the menu icon.
The following screen will be displayed asking for password.
Select the user ID.
Enter the password.
The default password is 00000000(8 zeros).
Press OK, the setup menu will be displayed
on screen.
All menus are navigated around using the Left/
Right/ Up/ Down and the Select button or mouse.
To step back out of the menus, press MENU button
or click the right button of the mouse.
17
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
2. Monitoring
2-1. OSD Description
The Status Bar on screen shows HDD capacity, network connection, current time, etc.
HDD capacity : Used capacity / Total capacity
Multi-screen Display icons : Single/ 4 way
USB memory connection
Mouse connection
Network connection
Current Date/Time
2-2. Select Channel
Use the Multiscreen display button ( ) on the popup menu to select the display mode.
Single Display 4 way split Display 9 way split Display
(HN1083 only)
Also you can use the DIS button on the remote controller to change the display mode.
Display switches in the following order when the DIS button is pressed.
Single Channel 4 Channel 9 Channel Single Channel
18
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
2-3. Digital Zoom
Left-click and drag the mouse to set the desired area for zoom in live or playback mode. (It is
available in single screen mode.)
Click the left button on the mouse.
The screen will change to the zoomed image with a small image displayed in the upper right
hand corner of the screen
The red box on the small picture indicates the position of the magnified image.
You can change the magnification of image and move the position of the magnified
Image, by rotating the mouse wheel
.
Drag the image to move the position of the magnified image.
Click the right button on the mouse to return to the original mage.
Red box
19
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
3. Playback
Click the right button on the mouse, the popup menu will be displayed on screen.
To begin playback, press the Play button on the popup menu.
3-1. OSD Description
The Control Bar on screen shows Playback control buttons, Progress bar, Display mode
buttons, Playback time, etc.
Previous/ Next time buttons Reverse Slow Play button
Time Bar Slow Play button
Playback Speed Display Replay button
Display mode buttons (1/4/9/16ch) Add Bookmark button
Stop button Search Bookmark button
Pause button Quick Archive button
Reverse Play button Playback Date & Time
Play button
3-2. Playback Control
Playback
When the Play button() is pressed, the unit will play forward at the rate the data was
recorded. While in the play mode, the user may change the playback direction, playback
speed. To return to play forward operations, press the Play button().
Reverse Play
To begin reverse playback, press the Reverse Play button().
20
QNVR_PoE 4 and 8 channel manual V1.0
QVNR04P/08P installation and user manual
Pause
During playback, press the Pause button(). This feature pauses all full screen and
multiscreen images. When this button is pressed in the pause mode, the unit will play.
Single Frame Advance
During the pause mode, press the Play button() to view the frame directly after the frame
displayed on screen.
Single Frame Rewind
During the pause mode, press the Reverse Play button() to view the frame directly before
the frame displayed on screen.
Fast Forward
In playback mode, press the Play button() to switch between various fast play modes such
as x2, x4, x8, x16, x32 play.
Fast Backward
In reverse playback mode, press the Reverse Play button() to switch between various
reverse play modes such as x2, x4, x8, x16 reverse play.
Slow Playback
In playback mode, press the Slow Play button() to switch between various slow play
modes such as x1/2, x1/4, x1/8, x1/16, x1/32 slow play.
Slow Reverse Play
In playback mode, press the Reverse Slow Play button() to switch between various slow
play modes such as x1/2, x1/4, x1/8, x1/16, x1/32 reverse slow play.
Stop
To stop playback and return to the live mode, press the Stop button().
3-3. Playback Search
The user can search the recorded video during playback.
The recorded video is indicated by a colour bar on the time bar().
You can use the Previous/ Next time buttons() to view if there are more recorded data.
Click the mouse at the desired point of the colour bar, you can view the recorded data.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87

Vista QNVR04P Installation and User Manual

Category
Digital Video Recorders (DVR)
Type
Installation and User Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI